Thingiverse
Snapmaker 2 Heated Bed Cable Saver by rojaljelly
by Thingiverse
Last crawled date: 3 years, 4 months ago
Because the cable of the Snapmaker 2 heated bed has no strain relief I've created a small helper. Replaces the original "cable holder" - just remove the 2 M3 screws.
Reuse the M3 nuts and screws in my design
Extra materials needed:
2 pcs. screw M4 - DIN7984 (like original Snapmaker screws; at least 6 mm long)
2 pcs. nut M4 (DIN934)
Reuse the M3 nuts and screws in my design
Extra materials needed:
2 pcs. screw M4 - DIN7984 (like original Snapmaker screws; at least 6 mm long)
2 pcs. nut M4 (DIN934)
Similar models
thingiverse
free
Snapmaker Heat Bed Cable Guide by CptBalu
... heat bed cable guide by cptbalu
thingiverse
this is for the heat bed cable of the snapmaker 2.0. it prevents the cable of wear.
thingiverse
free
Anycubic Kossel Plus - Bed support by Yakandu
... kossel plus - bed support by yakandu
thingiverse
for assembly it is necessary:
-2 original m4 screws + t-nuts
-1 m3 screw + nut
thingiverse
free
Full mount and dual fan bracket for E3D v6 by ArcherEG
...cs m4x20 screw
4 pcs m4x30 screw
2 pcs m3 nut
4 pcs m4 nut
4 pcs m3 washer
4 pcs m4 washer
1 pcs foam 10x10x25
2 pcs fan 30x30x10
thingiverse
free
18650 battery 3 cel by exelon
...cs
washer - m3 - 6 pieces
nut - m3 - 6 pieces
screw - m4 x 80mm - 1 piece
nut - m4 - 1 pc
washer - m4 - 1 pc
for connecting cable
thingiverse
free
Snapmaker 2.0 Heated Bed Cable Guide by CarvedArt
...snapmaker 2.0 heated bed cable guide by carvedart
thingiverse
helps protect and support the snapmaker's heated bed cable
thingiverse
free
Snapmaker 2.0 A350 Heated bed cable protector & cable cover by JH1616
...ed cable protector & cable cover by jh1616
thingiverse
cable cover and heated bed cable protector for the snapmaker 2.0 a350
thingiverse
free
MKS Robin TFT32 Casing with mount for 2020 by martin19791121
...y martin19791121
thingiverse
screws
m3 x 20 x 4 pcs.
m3 x 10 x 4 pcs.
m3 nut x 4 pcs.
m4 x 8 x 4 pcs.
m4 t nut for 2020 x 2 pcs.
thingiverse
free
Snapmaker 2 Heated Bed Cable Saver (remixed to print better) by PoetikDragon
...ut needing to clean/process the unsupported screw holes. you still need to provide your own m4x6 bolts and m4 nuts (two of each).
thingiverse
free
Heated bed cable support by Franmake
...heated bed cable support by franmake
thingiverse
heated bed cable support, 1cm m3 screw required.
thingiverse
free
Snapmaker 2.0 A350 Heated bed cable protector by AHS00
... from getting stuck with the "y" axis linear module. it attaches to the rear end of the linear module using m4x8 screws
Rojaljelly
thingiverse
free
Curtain Lock by rojaljelly
...curtain lock by rojaljelly
thingiverse
curtain lock for rails with 4 mm slot and 8 mm hole.
thingiverse
free
Display Mount for Snapmaker by rojaljelly
...snapmaker 3-in-1 (for the beta machine - can anybody confirm that the new display fits too?).
mountable to the top of the z-axis.
thingiverse
free
CO2 Capsule Holder by rojaljelly
...r of 18,5 mm (hole in the file is 18,7mm)
if you want another version (other diameter, more/less holes) please leave me a comment
thingiverse
free
Holder for Razor and Shaving Brush by rojaljelly
...the shelf is 16,5 mm and the hole for the razor has a diameter of 13 mm.
i polished the 13 mm hole with my dremel to perfect fit.
thingiverse
free
Finger Hex Bit Driver With Magnet by rojaljelly
... hex bit driver with ~27 mm diameter and 25,4 mm height.
with room for a ø10x2 mm magnet.
update 2018-08-27: added fusion360-file
thingiverse
free
Ultimaker 3 Anti Vibration Feet (TPU) by rojaljelly
...
thingiverse
anti vibration feet for the ultimaker mk 3.
rough dimensions: 41 x 38 x 9 mm
of course you will need 2 pieces each.
thingiverse
free
Cup holder for 65 mm sqare bar by rojaljelly
...
hole for cup: approx. ø70-76 mm
i run out of white filament during print so i changed to red so it looks nice for the first try.
thingiverse
free
Compact 28 Nozzle Holder (7x4) by rojaljelly
... i need to change the nozzles to screw it in and out of the holder.
outer dimensions: 80x50x10 mm
fusion360 / step files included
thingiverse
free
Cover for Samsung Wireless Charger (Galaxy S6) by rojaljelly
...hat is very bright - too bright for my bedroom.
so i designed this cover to reduce light emisions at night. reduce not eliminate!
thingiverse
free
Cover for Samsung Gear S3 Loading Station by rojaljelly
...my bedroom.
so i designed this cover to reduce light emisions at night. reduce not eliminate!
printed with black aprintapro pet-g
Snapmaker
thingiverse
free
「Snapmaker」Tiny Snapmaker by SnapmakerInc
...ker
designer：howard
info：this is a tiny snapmaker 3d printer
more information on snapmaker community : http://forum.snapmaker.com
thingiverse
free
FOR SNAPMAKER by darknessbot
...for snapmaker by darknessbot
thingiverse
i remade this for snapmaker
thingiverse
free
「Snapmaker」Reprap Snapmaker 3IN1 by SnapmakerInc
...「snapmaker」reprap snapmaker 3in1 by snapmakerinc
thingiverse
designer:
info:
setting:
thingiverse
free
Vibration Damper for Snapmaker 1 and Snapmaker 2 by kogomonier
...ry dampers of the snapmaker. snugs in perfectly and silences the snapmaker estimated by around 60-70%.
fits on snapmaker 1 and 2.
thingiverse
free
Snapmaker mounting plate
...snapmaker mounting plate
thingiverse
mounting plate for snapmaker actuator
thingiverse
free
「Snapmaker」Flowerpot by SnapmakerInc
...akerinc
thingiverse
name：flowerpot
designer：leonardo
info：
more information on snapmaker community : http://forum.snapmaker.com/
thingiverse
free
Snapmaker 2 Organizers
...ker 2 organizers
thingiverse
organizers for the snapmaker two. one is for a desk organizer, the other is if you want to hang it.
thingiverse
free
LED clips for snapmaker by ymmij
...led clips for snapmaker by ymmij
thingiverse
led clips for snapmaker.
thingiverse
free
snapmaker parts box by Shaocheng
...snapmaker parts box by shaocheng
thingiverse
parts box of snapmaker 3d printer
thingiverse
free
Snapmaker enclosure height extension
...on for the snapmaker enclosure to fit the height extended snapmaker 1. would be compatible with all parts of the enclosure frame.
Saver
thingiverse
free
Milk Saver Saver by aspork42
...” nursing accessory. it kept falling over when propped up on the couch or bed :(
took about 6 hours to print and used 35m of abs.
thingiverse
free
ear saver by blindog143
...ear saver by blindog143
thingiverse
ear saver
thingiverse
free
Bic saver / Pen saver by tommyzan
...bic saver / pen saver by tommyzan
thingiverse
i broke my pen, so i make this stronger coat
thingiverse
free
ear saver by Griase
...ear saver by griase
thingiverse
simpel ear saver
thingiverse
free
Curved Ear savers by
...curved ear savers by
thingiverse
curved ear saver. extra thick to be extra durable.
thingiverse
free
Spool Saver by LocoMartin
...spool saver by locomartin
thingiverse
spool saver for empty maker geeks filament spool.
thingiverse
free
cord saver by makerguy1234
...cord saver by makerguy1234
thingiverse
cord saver. note:does not work on ender 3 without direct drive
thingiverse
free
ear saver by andy1973109
...ear saver by andy1973109
thingiverse
another ear saver. made the hooks a little longer to hook the mask better.
thingiverse
free
Ear Saver with closure by Dama66
...ear saver with closure by dama66
thingiverse
ear saver with closure.
thingiverse
free
PKVES ear saver by kpcampbell07
...pkves ear saver by kpcampbell07
thingiverse
ear saver for school
Heated
thingiverse
free
NFS Heat
...nfs heat
thingiverse
nfs heat
thingiverse
free
heat by syalovitser
...heat by syalovitser
thingiverse
the miami heat logo. made in printcraft. james,bosh and wade!
thingiverse
free
Heating Rosette by Achiim
...ed stl is designed for standard heating sizes. but you can change the size of your heating rosette by changing the uploaded scad.
thingiverse
free
Heat bed 8x10 glass to 6x9 heat bed by hobbit1968
...heat bed 8x10 glass to 6x9 heat bed by hobbit1968
thingiverse
heat bed, 8x10 glass to 6x9 heat bed.
thingiverse
free
Heat-Tower by JMDesigns
...heat-tower by jmdesigns
thingiverse
heat-tower
thingiverse
free
heating key
...ey
thingiverse
this is a key to vent the heating in the house i hope you enjoy it.
follow me in instagram for more: 3d_print2018
thingiverse
free
Heating faucet by Woodruff
...heating faucet by woodruff
thingiverse
heating faucet replacement
thingiverse
free
Heated Bed by AnyWay
...heated bed by anyway
thingiverse
simple heated bed.
thingiverse
free
Heat Bed to Heat Chamber Adapter-6 fan by 3DCDN
...y 3dcdn
thingiverse
i made this adapter so that i could inject heat generated from my heat bed into the 3d printer heat chamber.
thingiverse
free
heat logo by LeeroyLeBG
...heat logo by leeroylebg
thingiverse
heat logo for 3d printer
Cable
thingiverse
free
Cable Tidy for mains power cables
...cable tidy for mains power cables
thingiverse
cable tidy for mains power cables, 6.5mm cable diameter.
thingiverse
free
cable clip / cable holder by kenjo123
...cable clip / cable holder by kenjo123
thingiverse
simple cable clip, designed for round power cables.
thingiverse
free
Pasa Cables - Cable grommet by tomisho98
...pasa cables - cable grommet by tomisho98
thingiverse
pasa cables
thingiverse
free
Cable holder
...thingiverse
hello, this is my very easy cable holder for two cables, it is for 5mm cable and 3mm cable.
i wish you good print :)
thingiverse
free
cable holder cable by Frostbiteg4ming
...all can fit most stander phone chargers on the market
the slot can accommodate 5mm in diameter cable but the opening is only 3mm
thingiverse
free
Cable Tidy (3.5mm cables) by Painless360
...les in one place on your desk.
perfect for things like charging cables for iphone and ipad and smaller thickness usb cables too.
thingiverse
free
Fixation cable Cable ties by JCR06
...fixation cable cable ties by jcr06
thingiverse
cable holder for microdelta rework
thingiverse
free
Cable Supports to Store Mains Cable
...cable supports to store mains cable
thingiverse
surface mount mains cable wraps...
thingiverse
free
Cable Manager 10mm Cables by peachthief
...ables by peachthief
thingiverse
cable manager for 10mm or smaller cables.
easy to print on it's side, no supports necessary.
thingiverse
free
Cable holder
... settings. suitable for cables that have diameter 4 and 3.5 millimeters. it holds two cables together for better cable managment.
Bed
thingiverse
free
bed by
...bed by
thingiverse
pink bed with a white pillow
thingiverse
free
Kossel Plus bed holder for aluminium bed with glass bed
...kossel plus bed holder for aluminium bed with glass bed
thingiverse
pla
thingiverse
free
bed by Syzguru11
...bed by syzguru11
thingiverse
bed
thingiverse
free
bed by callsaul
...bed by callsaul
thingiverse
bed
thingiverse
free
BED by leonk
...bed by leonk
thingiverse
bed
thingiverse
free
Bed by FaserMok
...bed by fasermok
thingiverse
bed
thingiverse
free
Bed by alexdfox
...bed by alexdfox
thingiverse
bed maker
thingiverse
free
bed stanchion
...bed stanchion
thingiverse
top of a bed stanchion
thingiverse
free
bed by bhawkinscds
...bed by bhawkinscds
thingiverse
four post bed
thingiverse
free
bed by EricG
...bed by ericg
thingiverse
bed by eric [created on 3dtin]
2
thingiverse
free
KV-2-2-2 by redstone125
...kv-2-2-2 by redstone125
thingiverse
nuclear death refrigerator x3.
thingiverse
free
Braccialetto 2 - Bracelets 2 by doctormao
...braccialetto 2 - bracelets 2 by doctormao
thingiverse
braccialetto 2 - bracelets 2
thingiverse
free
Schleuder 2 / Slingshot 2 by Ju5tMak3
...schleuder 2 / slingshot 2 by ju5tmak3
thingiverse
schleuder 2 / slingshot 2
have fun
thingiverse
free
2-Hexagon-2 by letongtr
...2-hexagon-2 by letongtr
thingiverse
ultrascope project
thingiverse
free
X'2 2 by kwcartroom
...x'2 2 by kwcartroom
thingiverse
try number 2
thingiverse
free
2 Color Box (#2) by David_Mussaffi
...2 color box (#2) by david_mussaffi
thingiverse
2 color box (#2)https://www.youtube.com/watch?v=g5jgss-fn_8
thingiverse
free
Toy Gun 2-2
...toy gun 2-2
thingiverse
this morning's design.
thingiverse
free
(a+b)^2 = a^2 +2ab+b^2, algebraic formula by lgbu
... ways to explain (a+b)^2 = a^2 +2ab+b^2.
the board alone is enough; the component pieces just add another layer of manipulation.
thingiverse
free
2 by orhandrkn
...2 by orhandrkn
thingiverse
2
thingiverse
free
2 by Nicolewake
...2 by nicolewake
thingiverse
2