Sn42 / Sn3.5 Queensland Railways (QR) 15' A Wagon

Last crawled date: 4 years, 2 months ago

Queensland Railways ( QR ) A Class 4 Wheeled Covered Goods Wagon, 15' Version as per QR Rolling Stock Handbook Plan / QR Drawing Nr. 598
For:
1:64, S Scale on HO / 16.5mm track.
What it is:
A low detail 4 wheel wagon (Not up to the quality of a modern ready to run wagon, this is a kit!)
Additional Parts Needed:
4 x 2mm "Top Hat" Bearings - 00 Gauge Romford Pin-Point Brass Bearings, Shouldered Type DW22 (Got my last lot from https://dundasmodels.co.uk/)
2mm Drill to gently clean out the axle holes
Kadee 10.5mm wheels spokes or solid disc
0.5mm drill and brass wire for hand brake and grab irons on the doors
Couplers of choice (Three link / hook, Kadee or Sprat & Winkle)
Fill a Gap Super Glue
Sand paper, 180 or 220 grit
No buffers supplied. Use white metal wagon buffers.
Notes:
This print has inside brace to help set up the walls square that go under the roof and on top of the chassis floor
Sand all edges before gluing
Sand roof to help remove layering marks
The short walls go on the inside
No supports should be required for this print
The final product will depend on the quality of the printer and how you have your settings under control
I recommend using a 0.3mm Nozzle for better detail and 0.1 or 0.08mm layering
Supplied as is, no support and no promises