Thingiverse
Smoothieboard workbench plate by gcardinal
by Thingiverse
Last crawled date: 4 years, 6 months ago
Just a simple workbench plate. Allows to work safely on board during testing / installation phase. Also keeps it cool.
Mounts for dual 45mm fans.
4mm standoffs, vent holes under drivers, main chip and a few random ones. About 3mm clearance from board to fan mounts.
4 x 4.5mm mounting holes
EDIT:
V0.1 14.01.2015
Made larger holes for fan mount- 4.5 x 6.5mm - will work for fans with hole spacing of 34 to 41mm.
Fan mounting plates are 1mm thicker
V0.2 18.01.2015
Tested with v1.0a board, adjusted holes for board mount.
Added version without built-in standoffs - so that nylon spacers could be used.
Mounts for dual 45mm fans.
4mm standoffs, vent holes under drivers, main chip and a few random ones. About 3mm clearance from board to fan mounts.
4 x 4.5mm mounting holes
EDIT:
V0.1 14.01.2015
Made larger holes for fan mount- 4.5 x 6.5mm - will work for fans with hole spacing of 34 to 41mm.
Fan mounting plates are 1mm thicker
V0.2 18.01.2015
Tested with v1.0a board, adjusted holes for board mount.
Added version without built-in standoffs - so that nylon spacers could be used.