Thingiverse
Smarti-tank by tsiolkovsky
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is SMARS remix designed to take the Smartibot controller and motor system whilst retaining the SMARS track system.
It is still very much a work in progress as:
the drive wheels need possibly a wee bit less taken out of the hub to reduce the required screw length to connect wheel to motor shaft.
Mounting bracket / screw holes need to be added to the front of this so that Smartibot controller board can be properly secured. Currently it is just held in place.
A better mounting for the battery needs to be worked out.
For this you will need :
1 x Smartibot kit - for the Smaritbot controller and motors.
1 x chasis
2 x drive wheels
2 x idler Wheels
32 x track segments
You can grab the Smartibot from here:
https://thecraftyrobot.net/collections/smartibot
It is still very much a work in progress as:
the drive wheels need possibly a wee bit less taken out of the hub to reduce the required screw length to connect wheel to motor shaft.
Mounting bracket / screw holes need to be added to the front of this so that Smartibot controller board can be properly secured. Currently it is just held in place.
A better mounting for the battery needs to be worked out.
For this you will need :
1 x Smartibot kit - for the Smaritbot controller and motors.
1 x chasis
2 x drive wheels
2 x idler Wheels
32 x track segments
You can grab the Smartibot from here:
https://thecraftyrobot.net/collections/smartibot