Thingiverse
Smaller print-in-place kaleidocycle by Jori
by Thingiverse
Last crawled date: 4 years, 8 months ago
I wanted to print one, but 5 hours printing time was too much...
... Scaling down obviously messed with tolerances and clearances.
=> redisinged and remixed it from scratch with 5 to 6cm diameter, resulting in about 2h printing time.
Worked right away; clearance being 0.3mm
Uploaded new stl "nano":
Increased strength, even smaller, clearance to 0.3mm in really every spot.
... Scaling down obviously messed with tolerances and clearances.
=> redisinged and remixed it from scratch with 5 to 6cm diameter, resulting in about 2h printing time.
Worked right away; clearance being 0.3mm
Uploaded new stl "nano":
Increased strength, even smaller, clearance to 0.3mm in really every spot.