Thingiverse
Small Formicarium
by Thingiverse
Last crawled date: 6 years, 2 months ago
This is a multi-layer ant nest I made from scratch.
I suggest to print the formicarium piece into a light color to increase visibility.
To assemble it you will need:
a piece of glass (or plexiglass) of ~94x64x2.3mm (between the formicarium and the top frame)
a piece of quite thick metal net of ~95x65mm (between the formicarium and the bottom frame)
6 bolts of 4x20mm (to secure the layers together)
some cotton (to fit inside the normal container or the simple one and fill with water)
a 8mm hose (for connections)
I suggest to print the formicarium piece into a light color to increase visibility.
To assemble it you will need:
a piece of glass (or plexiglass) of ~94x64x2.3mm (between the formicarium and the top frame)
a piece of quite thick metal net of ~95x65mm (between the formicarium and the bottom frame)
6 bolts of 4x20mm (to secure the layers together)
some cotton (to fit inside the normal container or the simple one and fill with water)
a 8mm hose (for connections)