Thingiverse
Slingmobiles by artdavis
by Thingiverse
Last crawled date: 3 years, 1 month ago
Slingmobiles are a collection of 3D printable simple wheeled toys that work with a printable slingshot track.
The individual mobile racers work well when assembled with M3 machine screw hardware (16mm socket cap screws and M3 Nyloc nuts). The nominal wheel rims are the 20mm diameter designs (though 25mm and 30mm are included as well for experimentation). Preferably the rims should be printed in rigid material (e.g. PLA) and then the tires in a flexible material (e.g. Ninjaflex) to be assembled together. Rigid one piece wheel parts are also supplied but these will have very poor grip on most floors and so will tend to veer around instead of traveling in a nice straight line.
Assembly instructions are included in the files. The slingshot assembly includes optional thru-holes and hex nut capture recesses for hardware reinforcement. Typically you shouldn't need them but if you start to see some layer separation (or your slingshot breaks) you can sure it up with M3 machine screws.
A handy printable M3 wrench to use for assembly is available here:http://www.thingiverse.com/thing:1174835
Slingshot track inspired by "Zheng3 Penny Ballista":http://www.thingiverse.com/thing:23464
The individual mobile racers work well when assembled with M3 machine screw hardware (16mm socket cap screws and M3 Nyloc nuts). The nominal wheel rims are the 20mm diameter designs (though 25mm and 30mm are included as well for experimentation). Preferably the rims should be printed in rigid material (e.g. PLA) and then the tires in a flexible material (e.g. Ninjaflex) to be assembled together. Rigid one piece wheel parts are also supplied but these will have very poor grip on most floors and so will tend to veer around instead of traveling in a nice straight line.
Assembly instructions are included in the files. The slingshot assembly includes optional thru-holes and hex nut capture recesses for hardware reinforcement. Typically you shouldn't need them but if you start to see some layer separation (or your slingshot breaks) you can sure it up with M3 machine screws.
A handy printable M3 wrench to use for assembly is available here:http://www.thingiverse.com/thing:1174835
Slingshot track inspired by "Zheng3 Penny Ballista":http://www.thingiverse.com/thing:23464
Similar models
thingiverse
free
Trinus - Bed Level Adjustment Screw Assembly by netlands
...l be inside the assembly)
a simple "nut catcher" is also included to be used with different adjustment screw solutions.
thingiverse
free
Prusa i3 MK3/MK3S Camera Mount (remix)
...for example https://www.thingiverse.com/thing:641854
bracket assembly for camera case - https://www.thingiverse.com/thing:2873677
thingiverse
free
RepRap Wilson Discount LCD Case & Mount by ryanpriore
...antity = 4)
you will reuse one of the existing m5 screws (and t-nut) to mount the final assembly. enjoy your new swank upgrade!
thingiverse
free
Expandable Auger for M3 screws by jhsevs
... included.
end pieces currently not included. i'll design end pieces as well as a tube flange with a bearing when i get time.
thingiverse
free
Skid steer Loader
...-32 nylon collar lock nuts
6x #10 flatwashers (optional)
1x m3 x 15mm machine screw
1x m3 nut
8x ~45mm o-rings
thingiverse
free
Outdoor trailer wheel hub for 3dSets Wheels by Teal69
... withoud making the track wider. you have to use 2x long m4 screws to screw the wheels against the new "wheel hub nut".
thingiverse
free
Pyraminx by faggahz
...748971https://www.thingiverse.com/thing:2752158https://www.thingiverse.com/thing:2749991https://www.thingiverse.com/thing:2748069
thingiverse
free
Anet A6 Cable Stabilisation by webdil
... x m3 * 20 screws
2 x m3 nuts
if my work is usefull for you, i would be very happy, if you could leave me a "like" :-)
thingiverse
free
Duplicator i3 - X Belt Rollers by ChristianCooper
...r's maximum x travel to account for the wheel on the right of the print head. i had to reduce my print area by 8mm to 192mm.
thingiverse
free
GoPro Hero 3/4 360 "Underwater" Spherical Rig YouGo3D Remix by itsyourproduct
...mm x 6 pcs.
m5 nut x 6 pcs.
m3 x 60mm x 4 pcs.
m3 nut x 4 pcs.
1/4" nut for tripod screw
and 4 wood screws like 2,5mm x 10mm
Artdavis
thingiverse
free
Egglantis by artdavis
...glantis by artdavis
thingiverse
egg shuttle "egglantis". snap together rocket model for holding an egg shaped payload.
thingiverse
free
Planet Eggspress by artdavis
...planet eggspress by artdavis
thingiverse
the "planet eggspress" egg carrying rocket model.
thingiverse
free
Customizable Embossing Stamp by artdavis
...ssing stamp. the image should be 150 x 150 pixels. the size of the stamp and it's features can be adjusted in the customizer.
thingiverse
free
Customizable Egg Model by artdavis
...is suitable as a reference or starting point for egg shape based projects. for instance: http://www.thingiverse.com/thing:2228825
thingiverse
free
Customizable Socket Wrench by artdavis
...d source) as necessary for your process.
inspired by hpaul's wrench set for 5.5mm nuts:http://www.thingiverse.com/thing:10905
thingiverse
free
Display mount for the RepRapDicount Full Graphic Smart Controller for the i3PRO by artdavis
...roller can be bolted on directly or using a case that has a matching hole pattern such as:http://www.thingiverse.com/thing:563515
thingiverse
free
Customizable Rocket Fin Alignment Jig by artdavis
...meters (ref: http://www.estesrockets.com/):
inner diameters:
bt-5: 13.2mm
bt-20: 18.0mm
bt-50: 24.1mm
bt-55: 32.6mm
bt-60: 40.5mm
thingiverse
free
Monoculight by artdavis
...rational
spark for myself and many others to work on developing technology around
3d printing and light. it's been great fun!
thingiverse
free
Customizable Rocket Tube Marking/Cutting Guide by artdavis
...ers for estes body tubes (ref: http://www.estesrockets.com):
bt-5: 13.8mm
bt-20: 18.7mm
bt-50: 24.8mm
bt-55: 34.0mm
bt-60: 42.0mm