Thingiverse
Slimbox M: mixbox-layout low profile fightstick by jfedor
by Thingiverse
Last crawled date: 2 years, 11 months ago
This is a mixbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches.
Should be printed at 0.20mm layer height. Prints without supports.
I used an Arduino Pro Micro clone, but many other boards should fit.
For attaching the bottom plate I used 3x10mm wood screws.
I used non-3D-printed keycaps for the WASD part. 3D-printed keycaps could also be used, they are a little fragile though.
Arduino code: https://github.com/jfedor2/gamepad
Should be printed at 0.20mm layer height. Prints without supports.
I used an Arduino Pro Micro clone, but many other boards should fit.
For attaching the bottom plate I used 3x10mm wood screws.
I used non-3D-printed keycaps for the WASD part. 3D-printed keycaps could also be used, they are a little fragile though.
Arduino code: https://github.com/jfedor2/gamepad
Similar models
thingiverse
free
Slimbox: hitbox-layout low profile fightstick by jfedor
...out
218mm wide version, should fit on ender printers with 220x220mm beds (you will probably have to print without skirt and brim)
thingiverse
free
Mixbox-style fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
MXBox by gigasturtz
...mxbox by gigasturtz
thingiverse
first prototype for a cherry switch based mixbox style fightstick.
thingiverse
free
Hitbox-layout fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
Keyboard fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
Low profile Keycap by zackinzanebyrd
...low profile keycap by zackinzanebyrd
thingiverse
low profile keycap ideal for macropads!
thingiverse
free
Redragon Shrapnel RGB Keycap replacement by xenomorphdelombre
...y xenomorphdelombre
thingiverse
replica of a redragon rgb cherry mx keycap (low profile) that i did to print on my resin printer
thingiverse
free
Cherry Switch to Kailh Choc KeyCap by PeculiarDesigns
... use kailh type keycaps, on a keychron low-profile switch. has notches for using a key-puller to remove the adapter if necessary.
thingiverse
free
Alien Keycap by Remotheman
...hould be printed upside-down. for better results - print head and keycap separately. use supports for head and glue them together
thingiverse
free
Kailh Low-Profile Full Keycap Set by spl1490
...39;t many options for keycaps. the first design i made for the keycap turned out really nice so i decided to post it.
stay tuned.
Slimbox
thingiverse
free
Slimbox: hitbox-layout low profile fightstick by jfedor
...out
218mm wide version, should fit on ender printers with 220x220mm beds (you will probably have to print without skirt and brim)
thingiverse
free
Smoothieboard box by TheUnderDog
...box by theunderdog thingiverse made a remix of the slimbox by mdietz. i will make also one for the...
Mixbox
thingiverse
free
DIY Portable Mixbox
...ommons cc by
you are free to use these files as you like, providing you give credit as per creative commons cc by license.
adrian
thingiverse
free
DIY Portable Mixbox (8 button version)
...ommons cc by
you are free to use these files as you like, providing you give credit as per creative commons cc by license.
adrian
thingiverse
free
Mixbox-style fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
Arcade Stick to Keybox (Mixbox) by Bertzerker
...ill glue on a small hollow pvc pipe stud and put some rubber bands around to look if i want a set position or leave it rotatable.
thingiverse
free
MXBox by gigasturtz
...gigasturtz thingiverse first prototype for a cherry switch based mixbox style...
thingiverse
free
The Fiftyfifty Fighting Game Controller by oraro
...by oraro thingiverse an alternative to the hitbox and mixbox the fiftyfifty! a mix (up), if you will it's...
thingiverse
free
The Fiftyfifty Fighting Game Controller by oraro
...thingiverse a mix (up) between the hitbox and the mixbox.. the fiftyfifty! it should be able to take in...
thingiverse
free
Protobox Sanwa Joystick Adapter by Lynchc236
...adapter by lynchc236 thingiverse i wanted to try a mixbox but didn't want to build a whole new stick...
Jfedor
thingiverse
free
Keyboard fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
Periodic table magnet set by jfedor
...cutout on the back for gluing in a circular magnet. i used 9x2mm magnets.
openscad source file included if you want to customize.
thingiverse
free
Hitbox-layout fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
Mixbox-style fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
IKEA LIVBOJ wireless charger stand by jfedor
...supports, the bigger one doesn't.
designed from scratch, but basically a variant of https://www.thingiverse.com/thing:3238150
thingiverse
free
Arcade stick with Sanwa parts by jfedor
... with any other board.
for attaching the bottom plate i used 3x16mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
Dactyl 36-key ("minidox") by jfedor
.../dactyl-manuform-build-log.html
qmk fork with configuration and layout for this keyboard: https://github.com/jfedor2/qmk_firmware
thingiverse
free
Dactyl Manuform 5x6 by jfedor
... from prusaslicer are practically impossible to remove.
build log: https://blog.jfedor.org/2020/11/dactyl-manuform-build-log.html
thingiverse
free
Slimbox: hitbox-layout low profile fightstick by jfedor
...out
218mm wide version, should fit on ender printers with 220x220mm beds (you will probably have to print without skirt and brim)
Fightstick
thingiverse
free
Keyboard fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
Fightstick Mounting Bracket by ClassyNemesis
...others found it useful for remixing.
the screw holes are intentionally misaligned to match the pre-drilled holes in the framebox.
thingiverse
free
Hitbox-layout fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
Mixbox-style fightstick by jfedor
... with any other board.
for attaching the bottom plate i used 3x10mm wood screws.
arduino code: https://github.com/jfedor2/gamepad
thingiverse
free
Arcade Fightstick by cmanoncom
...lic piece.
on the back there's a cut for either a neutrik or switchcraft usb connector.
the top piece is hold by 8 m4 screws.
thingiverse
free
Street Fighter Fightstick Box
...ase also note that none of this has been physically tested yet, so if there is a problem, please let me know as soon as possible.
thingiverse
free
Start and coin button top plate for Mad Catz Arcade FightStick PRO by TK_DESIGN
... by tk_design
thingiverse
top mount start and coin button for mad catz arcade fightstick pro jamma custom.
いいステッカーでしょ！これ分かる人。;-)
thingiverse
free
Slimbox: hitbox-layout low profile fightstick by jfedor
...out
218mm wide version, should fit on ender printers with 220x220mm beds (you will probably have to print without skirt and brim)
thingiverse
free
MXBox by gigasturtz
...first prototype for a cherry switch based mixbox style fightstick ...
Layout
thingiverse
free
airpods layout by NYAMKA10
...airpods layout by nyamka10
thingiverse
airpods layout
thingiverse
free
Shower Layout by jcleek
...shower layout by jcleek
thingiverse
layout for possible shower build. not for 3d printing.
thingiverse
free
layout tools by imagonman
...layout tools by imagonman
thingiverse
bowling layout tools for pitch span dual angle.
thingiverse
free
Easel Kit Layout by Spinel
...easel kit layout by spinel
thingiverse
easel kit layout for makerbot replicator
thingiverse
free
Teton Bus Skoolie Layout by monkeytravel
...teton bus skoolie layout by monkeytravel
thingiverse
a layout of the design for my school bus conversion.
thingiverse
free
Face mask layout by samuelemarazzita
...ta
thingiverse
a simple 3d printed facemask layout to create your own sewn masks in 3 different sizes: small, medium, and large.
thingiverse
free
Configurable Arcade Joystick Layout by frezik
...an easily change the number of buttons as you please.
the layout is based on:
http://www.slagcoin.com/joystick/layout/sega2_m.png
thingiverse
free
EAST land layout by JPasman
...east land layout by jpasman
thingiverse
for and east project
thingiverse
free
Grid Plane with brick layout by strangeloop
...with brick layout by strangeloop
thingiverse
grid plane with brick layout. have uploaded the scad file to modify offset amounts.
thingiverse
free
Revised layout for parametric belt by jag
...ayout for parametric belt by jag
thingiverse
i just changed the layout to make it a little easier to make different sized belts.
Profile
thingiverse
free
Profile
...profile
thingiverse
profile
thingiverse
free
Profil by tytanos
...profil by tytanos
thingiverse
profil taki jakis
thingiverse
free
Modular Profil 204040 System Profils by BuildJustForFun
...ustforfun
thingiverse
hello everybody
here are the modular profil 204040 systems profils.
2020-02-18 upload
from 5mm till 300mm.
thingiverse
free
Modular Profil 4040 System Profils by BuildJustForFun
...djustforfun
thingiverse
hello everybody
here are the modular profil 4040 systems profils.
2020-02-18 upload
from 5mm till 300mm.
thingiverse
free
Modular Profil 2040 System Profils by BuildJustForFun
...djustforfun
thingiverse
hello everybody
here are the modular profil 2040 systems profils.
2020-02-17 upload
from 5mm till 300mm.
thingiverse
free
Modular Profil 6060 System Profils by BuildJustForFun
...djustforfun
thingiverse
hello everybody
here are the modular profil 6060 systems profils.
2020-02-19 upload
from 5mm till 300mm.
thingiverse
free
Modular Profil 3060 System Profils by BuildJustForFun
...djustforfun
thingiverse
hello everybody
here are the modular profil 3060 systems profils.
2020-02-19 upload
from 5mm till 300mm.
thingiverse
free
Modular Profil 306060 System Profils by BuildJustForFun
...ustforfun
thingiverse
hello everybody
here are the modular profil 306060 systems profils.
2020-02-20 upload
from 5mm till 300mm.
thingiverse
free
Profile joint for aluminium profile by V34
...his is for a rgb+w waterproof ledstripe with 5 pins:https://m.gearbest.com/goods/pp_3002243573899075.html?lang=en&wid=2000001
thingiverse
free
Profile Nut M3 for CR-10 Profiles
...ly need an m3 nut which is pressed into the plastic part.
i've used pla but material should not matter. no rafts no supports.
M
thingiverse
free
M&M by charlesstines
...m&m by charlesstines
thingiverse
m&m by charles [created on 3dtin]
thingiverse
free
The M&M by Elskunky
...e
a yummy candy that everyone loves!
original m&m from:
© 2014 mars, incorporated and its affiliates. all rights reserved.
thingiverse
free
M&M stencil by Longquang
...m&m stencil by longquang
thingiverse
m&m stencil
thingiverse
free
M&M Man by Elskunky
...m&m man by elskunky
thingiverse
a m&m man or woman for decoration or for a present.
thingiverse
free
Makerbot M&M by kenzie12x
...t m&m by kenzie12x
thingiverse
this is a plastic, white m&m that i made using the makerbot. it is one inch by one inch.
thingiverse
free
M&M by franktripp
...m&m by franktripp
thingiverse
this thing was made with tinkercad. edit it online https://tinkercad.com/things/9my8dgchanq
thingiverse
free
Lid for M&M Bowl
...amp;m bowl
thingiverse
a lid for a m&m bowl. very handy if you cannot resist an open bowl. it looks nice in our closset too!
thingiverse
free
m&m minis by Kovabunch
...m&m minis by kovabunch
thingiverse
minis
thingiverse
free
Peanut M&M Man by Elskunky
...peanut m&m man by elskunky
thingiverse
the peanut version of the m&m characters.
thingiverse
free
M&M's Box by loiseaucreatif
... 23g / une dizaine de m&m’s, équivalent à 15 grammes de sucre environ).le couvercle comporte un pas de vis pour la fermeture.