Thingiverse
![SLA. NeoPixel - Lightguide Fibre by PolyVinalDistillate](/previews/5030250.jpg)
SLA. NeoPixel - Lightguide Fibre by PolyVinalDistillate
by Thingiverse
Last crawled date: 4 years, 2 months ago
Two-part neopixel to lightguide fibre coupler.
Print nph.stl in clear resin, and nph_shell.stl in something opaque.
Insert WS2812B in nph.stl in the square recess and solder up wires and 100n capacitor as per picture. Seal with some drops of clear printer resin and a UV laser (405 nm).
Dip end of fibres in clear printer resin and pack into cylindrical recess. Cure with UV laser pointer to bond fibres in place.
slide nph_shell.stl down the fibres and onto nph.stl. Seal together with more clear printer resin and laser pointer. Aim is weatherproof seal, so get a good amount in there!
Print nph.stl in clear resin, and nph_shell.stl in something opaque.
Insert WS2812B in nph.stl in the square recess and solder up wires and 100n capacitor as per picture. Seal with some drops of clear printer resin and a UV laser (405 nm).
Dip end of fibres in clear printer resin and pack into cylindrical recess. Cure with UV laser pointer to bond fibres in place.
slide nph_shell.stl down the fibres and onto nph.stl. Seal together with more clear printer resin and laser pointer. Aim is weatherproof seal, so get a good amount in there!
Similar models
grabcad
free
![Seal Mold](/t/5749970.jpg)
Seal Mold
...d
this is a 3d printed mold designed to reproduce custom silicone seals.
it is best printed on an sla printer with clear resin.
thingiverse
free
![Straw-Glass for Clear Resin Printers by Adolph](/t/8826584.jpg)
Straw-Glass for Clear Resin Printers by Adolph
...straw-glass for clear resin printers by adolph
thingiverse
clear resin glass with straw
grabcad
free
![Microfluidic droplet generator](/t/10969372.jpg)
Microfluidic droplet generator
...icrofluidic droplet generator
grabcad
3dp droplet generator
resin - funtodo nano clear
layer - 25um
3d printer - asiga max uv
3dwarehouse
free
![Green Laser Pointer](/t/5864980.jpg)
Green Laser Pointer
...green laser pointer
3dwarehouse
my first upload green laser pointer #green #laser #pointer #wv
grabcad
free
![Laser pointer](/t/1858978.jpg)
Laser pointer
...laser pointer
grabcad
simple laser pointer model.
grabcad
free
![laser pointer stand](/t/5695800.jpg)
laser pointer stand
...laser pointer stand
grabcad
laser pointer stand
thingiverse
free
![Laser Pointer Lockout](/t/4893369.jpg)
Laser Pointer Lockout
...laser pointer lockout
thingiverse
this is a safety lockout for a laser pointer.
thingiverse
free
![Laser pointer clip by dubbear](/t/9025177.jpg)
Laser pointer clip by dubbear
...laser pointer clip by dubbear
thingiverse
laser pointer clip
grabcad
free
![Rough Outline Laser Pointer](/t/5795052.jpg)
Rough Outline Laser Pointer
...rough outline laser pointer
grabcad
of infiniter laser pointer
3dwarehouse
free
![laser pen pointer](/t/10145961.jpg)
laser pen pointer
...laser pen pointer
3dwarehouse
it is a model of a laser pen pointer
Lightguide
thingiverse
free
![Corona BusyLight by SailorCM](/t/5099281.jpg)
Corona BusyLight by SailorCM
...or esp8266, connected to a neopixel-ring, placed above the lightguidepart ...
thingiverse
free
![Buspirate Case v3.6 & v4](/t/4923657.jpg)
Buspirate Case v3.6 & v4
...https://github.com/andimoto/case_buspirate_v4 . buspirate v4 case consists of buspirate_print_case.stl and buspirate_print_lightguide.stl . buspirate v3.6 is the file...
thingiverse
free
![HxC Floppy Emulator SD card enclosure by livius147](/t/8709052.jpg)
HxC Floppy Emulator SD card enclosure by livius147
...possible i will improve the design by adding leds lightguide and stls for buttons. i uploaded a second version...
thingiverse
free
![OggStreamer - Internet Audio Streaming Device by f15h](/t/9061794.jpg)
OggStreamer - Internet Audio Streaming Device by f15h
...thing about it - that we will print the lightguide for the leds with our pursa mendel using transparent...
thingiverse
free
![Sparkfun Photon Weather Shield Case by qhartman](/t/8039171.jpg)
Sparkfun Photon Weather Shield Case by qhartman
...a piece of clear filament to act as a lightguide but i haven't found it necessary. large cutout for...
thingiverse
free
![Optical Filament Runout Sensor Enclosure by warpster](/t/8771246.jpg)
Optical Filament Runout Sensor Enclosure by warpster
...the machine screw from the top. i printed the lightguide with t-glase which makes a fairly good light guide....
thingiverse
free
![Heated Decal Bath by killboxscalemodels](/t/8089896.jpg)
Heated Decal Bath by killboxscalemodels
...in petg (but pla should be ok also). the lightguide and display lens should be 3d printed with transparent...
thingiverse
free
![MegaGRRL Desktop - Real Hardware YM2612 VGM Player - Casing by Voodle](/t/8496363.jpg)
MegaGRRL Desktop - Real Hardware YM2612 VGM Player - Casing by Voodle
...are installed in the upperbody, the led lenses and lightguide are installed, and the lcd is securely held at...
thingiverse
free
![Panzertriebwagen nr 16 in H0 (1/87) scale (Märklin) by dasbert33](/t/8622618.jpg)
Panzertriebwagen nr 16 in H0 (1/87) scale (Märklin) by dasbert33
...pla in 0.1 z-res. buffers, nem coupler holder and lightguide have been printed in abs, the latter in transparent...
Polyvinaldistillate
thingiverse
free
![Scaled version of impeller by jawkins by PolyVinalDistillate](/t/8823009.jpg)
Scaled version of impeller by jawkins by PolyVinalDistillate
...te
thingiverse
this should be the version that is scaled to fit my impeller housing.
( http://www.thingiverse.com/thing:229657 )
thingiverse
free
![MM18 Speed Control Rig by PolyVinalDistillate](/t/9002354.jpg)
MM18 Speed Control Rig by PolyVinalDistillate
... lab equipment for students!
this will be used as an aid to teach students how to implement motor speed control with an atmega.
thingiverse
free
![Quick OpenSCAD Hypercube Generator by PolyVinalDistillate](/t/8873121.jpg)
Quick OpenSCAD Hypercube Generator by PolyVinalDistillate
...h good bridging capabilities to actually print! i'm sure there's a way to write it more efficiently, but i was in a rush!
thingiverse
free
![Impeller Housing by PolyVinalDistillate](/t/9007977.jpg)
Impeller Housing by PolyVinalDistillate
... the impeller here: http://www.thingiverse.com/thing:34563/#comments.
the motor i used came out of a cheap 18 v electric drill.
thingiverse
free
![CTC/Replicator Dual Z Axis Tilt Control by PolyVinalDistillate](/t/8265033.jpg)
CTC/Replicator Dual Z Axis Tilt Control by PolyVinalDistillate
...erse.com/thing:497923. intended that 2 be printed and fitted as the top rod-holders. allows rods to be tilted forward / backward.
thingiverse
free
![40 mm Fan shroud by PolyVinalDistillate](/t/8740718.jpg)
40 mm Fan shroud by PolyVinalDistillate
...sistors used in http://www.thingiverse.com/thing:1488460 (but without the housing because it didn't fit in the final design!)
thingiverse
free
![Recyc bin key by PolyVinalDistillate](/t/8983423.jpg)
Recyc bin key by PolyVinalDistillate
...ensibly and not contaminate the bin with general waste.
should print with no support on a 0.2 mm build layer and 0.4 mm nozzle.
thingiverse
free
![40 mm fan guard by PolyVinalDistillate](/t/8740720.jpg)
40 mm fan guard by PolyVinalDistillate
...t the equipment is switched on, the better!
printed in abs, 0.4 mm nozzle, 0.2 mm layers. acetone-vapour treated to reduce noise.
thingiverse
free
![Gargoyle for door by PolyVinalDistillate](/t/8932467.jpg)
Gargoyle for door by PolyVinalDistillate
...l to peel otherwise. mouth wasn't too bad to remove support from, and after acetone vapour treatment it looks good (see pic).
Neopixel
thingiverse
free
![NeoPixel Mount](/t/4648614.jpg)
NeoPixel Mount
...neopixel mount
thingiverse
geeetech a10m neopixel mount
thingiverse
free
![neopixel clock by arradan](/t/8687139.jpg)
neopixel clock by arradan
...neopixel clock by arradan
thingiverse
this is frame for neopixel clock with 60 led neopixel ring.
thingiverse
free
![neopixel cover](/t/4789110.jpg)
neopixel cover
...neopixel cover
thingiverse
a basic cover made for neopixel's using clear pla filament
thingiverse
free
![Neopixel Cover](/t/4770105.jpg)
Neopixel Cover
...neopixel cover
thingiverse
neopixel cover i made for a knight rider light bar build made in freecad.
thingiverse
free
![Joseph Neopixel by ShimmyJ](/t/8529087.jpg)
Joseph Neopixel by ShimmyJ
...joseph neopixel by shimmyj
thingiverse
neopixel shifts colors
thingiverse
free
![3DX Neopixel Project](/t/4697992.jpg)
3DX Neopixel Project
...3dx neopixel project
thingiverse
a design for a neopixel based off of arduino.
thingiverse
free
![Neopixel Triplet by reed](/t/8995329.jpg)
Neopixel Triplet by reed
...neopixel triplet by reed
thingiverse
holds three single pieces of a neopixel ribbon.
thingiverse
free
![3dx neopixel by 21smithe](/t/8294680.jpg)
3dx neopixel by 21smithe
...3dx neopixel by 21smithe
thingiverse
print, then glue neopixels to the print. plug in the code and go
thingiverse
free
![NeoPixel Star by fvan84](/t/8952999.jpg)
NeoPixel Star by fvan84
...neopixel star by fvan84
thingiverse
a star shape piece to fit 5 neopixel sticks
thingiverse
free
![Funny Neopixel glasses](/t/4832869.jpg)
Funny Neopixel glasses
...funny neopixel glasses
thingiverse
tested with arduino uno and adafruit neopixel library :-) d=50mm
Fibre
turbosquid
$39
![Natural fibre carry Bags](/t/13516296.jpg)
Natural fibre carry Bags
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
![Crinoline Chair With Armrests and Polyethylene Fibre](/t/13484074.jpg)
Crinoline Chair With Armrests and Polyethylene Fibre
...hair with armrests and polyethylene fibre for download as max on turbosquid: 3d models for games, architecture, videos. (1390035)
turbosquid
$49
![Futuristic Carbon Fibre Panels (PBR)](/t/13508958.jpg)
Futuristic Carbon Fibre Panels (PBR)
...istic carbon fibre panels (pbr) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1212926)
3ddd
$1
![Resident "FIBRE LIGHT - BOTTLE"](/t/740013.jpg)
Resident "FIBRE LIGHT - BOTTLE"
... fibre light , bottle
led. подвесной светильник из ультратонкого углеволокна.
turbosquid
$10
![Fibre-reinforced plastic rebar factory](/t/13421767.jpg)
Fibre-reinforced plastic rebar factory
... plastic rebar factory for download as mat, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1297054)
turbosquid
$45
![Carbon fibre floor standing speakers](/t/13269595.jpg)
Carbon fibre floor standing speakers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![Cedrimartini Ufo Glass-fibre Pendant Lamp](/t/13514115.jpg)
Cedrimartini Ufo Glass-fibre Pendant Lamp
...cedrimartini ufo glass-fibre pendant lamp for download as max on turbosquid: 3d models for games, architecture, videos. (1386392)
3ddd
$1
![Покрытие "Fibres de Cotex" (часть 1)](/t/655113.jpg)
Покрытие "Fibres de Cotex" (часть 1)
...uot; ткани. покрытие скрывает дефекты стен, не впитывает запахи, не выгорает, обеспечивает дополнительную тепло- и звукоизоляцию.
3ddd
$1
![Покрытие "Fibres de Cotex" (часть 2)](/t/719935.jpg)
Покрытие "Fibres de Cotex" (часть 2)
...uot; ткани. покрытие скрывает дефекты стен, не впитывает запахи, не выгорает, обеспечивает дополнительную тепло- и звукоизоляцию.
3ddd
$1
![Zanotta Undercover Sofa](/t/609242.jpg)
Zanotta Undercover Sofa
...polyester fibre. removable quilted cover with heat bound polyester fibre in fabric or...
Sla
3ddd
$1
![CILEK SL ACTIVE](/t/720249.jpg)
CILEK SL ACTIVE
...sl active 3ddd cilek cilek active (sl active white) sla1304 кровать...
3ddd
$1
![Cilek SL ACTIVE](/t/611436.jpg)
Cilek SL ACTIVE
...3ddd cilek , стеллаж cilek active (sl active white) 1501-sla стеллаж...
3d_export
$5
![ring-love norian-54-64 mm 4pcs](/t/11419596.jpg)
ring-love norian-54-64 mm 4pcs
...norian-54 ring-love norian-56 ring-love norian-60 ring-love norian-64 suitable for sla and sls and similar printing...
3d_export
$10
![cute kitten v2 stl 3d print model](/t/11492621.jpg)
cute kitten v2 stl 3d print model
...print model 3dexport solid type (fdm) and hollow type (sla & dlp)<br>stl file for 3d print<br>size :<br>x : 66...
3d_export
$5
![tesseract hypercube](/t/11923109.jpg)
tesseract hypercube
...each diagonal has 6 faces. you can use sls, sla and other technologies to print it. moreover different textures...
3d_export
$23
![the last engineer 3d printing figurine](/t/11447923.jpg)
the last engineer 3d printing figurine
...will also receive "assembly manual" for fff/fdm 1.0 and dlp/sla 1.0 versions in pdf format. the figurine is saved...
3d_export
$5
![groot con grabadora](/t/11418642.jpg)
groot con grabadora
...enabled, however you can also use a dlp or sla printer with resin as well. for small scale printouts,...
3d_export
$5
![deer christmas 3](/t/11417812.jpg)
deer christmas 3
...enabled, however you can also use a dlp or sla printer with resin as well. you should use a...
3d_export
$5
![deer christmas 2](/t/11417842.jpg)
deer christmas 2
...enabled, however you can also use a dlp or sla printer with resin as well. you should use a...
3d_export
$5
![deer christmas](/t/11417925.jpg)
deer christmas
...enabled, however you can also use a dlp or sla printer with resin as well. you should use a...