Thingiverse
SkyWatcher EQ5 EQ3 motor box holder by ndupont
by Thingiverse
Last crawled date: 4 years, 12 months ago
Replacement holder for the EQ5 and EQ3 motor box.
Print with a large brim (20mm) and supports. 0.8mm walls, 1.2mm top/bottom, 20% infill is ok.
4 versions :
standard 1.75in tripod (round tripod)
standard rectangular tripod (68x30mm)
custom M16 to be used on a pier
motor box case alone, if you want to remix it to your need
Time lapse : https://www.youtube.com/watch?v=Cb9_agrQVp4
Print with a large brim (20mm) and supports. 0.8mm walls, 1.2mm top/bottom, 20% infill is ok.
4 versions :
standard 1.75in tripod (round tripod)
standard rectangular tripod (68x30mm)
custom M16 to be used on a pier
motor box case alone, if you want to remix it to your need
Time lapse : https://www.youtube.com/watch?v=Cb9_agrQVp4