Thingiverse
Skeleton 3d Print Bed Platform by PhatJustice
by Thingiverse
Last crawled date: 3 years ago
This is a print bed bracket for the Skeleton-3d. This allows you to clip a sheet of glass to a spring-mounted platform... this is needed especially if you don't have a PCB bed heater to clip onto.
Also, if you're looking into attaching a 100x100mm silicone pad to your glass... then I recommend editing the bracket's SCAD to remove the grid. It should be out of the way and the heating pad should clear the platform!
Currently I'm using this with PLA on a PEI sheet that I cut with a box cutter. Works okay so far. Mounted on a 4.5"x4.5" glass sheet I got from Lowes.
The corner brackets allow you to have a nut trap to hold it still while you adjust the bed from above with a screw driver. This wraps around the corners of the wood piece that you cut and drill for the print bed. Edit the SCAD file to the appropriate thickness of the wood plank that you used.
Enjoy! I hope this is useful to some of you!!!
Also, if you're looking into attaching a 100x100mm silicone pad to your glass... then I recommend editing the bracket's SCAD to remove the grid. It should be out of the way and the heating pad should clear the platform!
Currently I'm using this with PLA on a PEI sheet that I cut with a box cutter. Works okay so far. Mounted on a 4.5"x4.5" glass sheet I got from Lowes.
The corner brackets allow you to have a nut trap to hold it still while you adjust the bed from above with a screw driver. This wraps around the corners of the wood piece that you cut and drill for the print bed. Edit the SCAD file to the appropriate thickness of the wood plank that you used.
Enjoy! I hope this is useful to some of you!!!
Similar models
thingiverse
free
Quick Corner Mag Glass Clamp by Superflex_Plastic_Fantastic
...tall spring. install wingnut.
probably best printed in abs for longevity as with all these clamping devices used on a heated bed.
thingiverse
free
Printrbot Simple Glass Clip for Alum Bed by JPoel
...s piece from a cheap picture frame, approx 1.25mm thick. if these clips are loose on your bed you can add tape to tighten it up.
thingiverse
free
MP Select Mini Glass Bed Mounting Bracket by falconman
...r. it will be slightly less secure than the original, but should eliminate any possibility of interference. look for the v2 file.
thingiverse
free
Black Widow glass bed corner bracket by tuxcat
... the one near the power connector to fit after printing.
added a model that is cut short for the one nearest the power connector.
thingiverse
free
180mm x 240mm Plate Glass Clips by coberdas
...have to change any settings on your slicing software. you do have to re-level your print bed when adding glass to the print bed.
thingiverse
free
Corner bracket for glass bed Anet A8 by David_en8
...en just use "mirror" in your slicer to produce the mirror copy of the design
i used autodesk fusion 360 for the design.
thingiverse
free
Multoo MT1.5 bed corner glass fixing brackets by NvigR8
... head screws m2x5 grub screws.
edit: on 12/2 i replaced the rear bracket with one that gives more clearance to the z ball screws.
thingiverse
free
corner bracket for 1/8 sheet material by CTLS
...nted but it should fit 1/8" plexiglass and work for making an enclosure for a printer or whatever you need an enclosure for.
thingiverse
free
CTC Adjustable Glass Bed Corner Clamp by m4t42
...ers for a 6" x 9" glass plate as this seems a pretty common size - i will add them to this thing when they're done.
thingiverse
free
Silicone Heat Bed Mount by clough42
...r configured correctly. it's very easy to reach very high temperatures (>150c) very quickly if you have it misconfigured.
Phatjustice
thingiverse
free
Finial Base by PhatJustice
...east $5 for it with a harp that you probably don't need.
so join me and tell the lamp parts industry to go eff themselves. :)
thingiverse
free
Nick's Replacement Faucet by PhatJustice
...;t leave that alone.
i snuck a caliper into his bathroom on his birthday for measurements and made these for him the next week.
thingiverse
free
Endstop Switch Mounts for RepRap Wallace by PhatJustice
...ed 9mm apart.
these x and y mounts are attached to the rods by zip ties, and the z is clamped on by bolting on the micro switch.
thingiverse
free
Cord Winding Hooks by PhatJustice
...ifting around... that was the only tough part) and built this thing.
now we can move the mixer without tripping over the cord.
thingiverse
free
Wallace Extruder Gap Adapter by PhatJustice
...r fills the gap between the extruder and the j-head nozzle holder if you decide to mount the slot-mount plate under the carriage.
thingiverse
free
Guidler Bearing Axle by PhatJustice
...nscad in just as much time as it took to download the stl for this thing.
so why are you reading this??? go and make one!! :-d
thingiverse
free
Skeleton 3d Feet by PhatJustice
...t to rock opposite corners. also this was an attempt to try to isolate the insane amount of vibration transmitting into my table.
thingiverse
free
Button circuit boards to use with PiSP by PhatJustice
...tons incorrectly.... well, you get the idea.
if nothing is being written, i'm going to assume that it's all hunky dory.
thingiverse
free
Air 2 Streamlined Squad(s) by PhatJustice
...edges of the squads.
now, i can have the x-carriage move back and forth without wires getting caught on the squads or the screws.
thingiverse
free
Badge Holder Strap Replacement by PhatJustice
...replace the badge, you just pull the badges until enough wire is expose to the slide the ring up so that the badges can slip out.
Skeleton
archibase_planet
free
Skeleton
...skeleton
archibase planet
skeleton
skeleton n031209 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Skeleton
...skeleton
archibase planet
exhibit skeleton
skeleton anteater n100310 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$10
skeleton
...skeleton
3dexport
skeleton. undead from the warcraft universe.
archibase_planet
free
Skeleton
...ton
archibase planet
skeleton human anatomy anthropotomy
skeleton n020309 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$10
Skeleton
...skeleton
3dexport
skeleton model to be used in lab environment or games.
design_connected
$13
Skeleton
...skeleton
designconnected
itai bar on skeleton computer generated 3d model. designed by itai bar on.
turbosquid
$110
Skeleton
...urbosquid
royalty free 3d model skeleton for download as fbx on turbosquid: 3d models for games, architecture, videos. (1481188)
turbosquid
$25
Skeleton
...urbosquid
royalty free 3d model skeleton for download as fbx on turbosquid: 3d models for games, architecture, videos. (1453677)
turbosquid
$19
Skeleton
...urbosquid
royalty free 3d model skeleton for download as max on turbosquid: 3d models for games, architecture, videos. (1165477)
turbosquid
$10
Skeleton
...urbosquid
royalty free 3d model skeleton for download as ztl on turbosquid: 3d models for games, architecture, videos. (1426410)
Platform
archibase_planet
free
Platform
...rm
archibase planet
platform
platform stefano galli savio cerrato n040413 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
turbosquid
$4
Platform
...d
royalty free 3d model platform for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1363559)
3d_export
$5
WORKING PLATFORM
...working platform
3dexport
working platform 4000x3000x1500mm
turbosquid
$20
Platform
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Platform
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Platform
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Platform
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Platform
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$19
Drilling Platform
...rm for coastal areas. designed to perform drilling operations. include standart materials scene and v-ray scene with environment.
3d_export
$15
steel grill platform
...steel grill platform
3dexport
steel grill platform
Bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
free
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
free
bed
...bed
3ddd
bed , постельное белье
bed
3ddd
$1
Bed
...bed
3ddd
bed , постельное белье , постель
bed
3d_export
$7
bed adairs bed
...rs bed
3dexport
bed adairs bed in modern style. if you want a smoother surface, please turn on turbosmooth in the modifier list.
design_connected
$27
...print
designconnected
moroso print computer generated 3d model. designed by wanders, marcel.
3ddd
free
Eichholtz Prints
...- eichholtz print central station i
13 - eichholtz print central station ii
14 - eichholtz print marisa
15 - eichholtz print tish
3ddd
$1
Eichholtz Prints
...print abstract - set of 2
10 - eichholtz print orange abstract
11 - eichholtz print buddha right
12 - eichholtz print buddha left
turbosquid
$1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Eichholtz Prints
...of 4
2 - print dunbar 2 set of 4
3 - print guadeloupe 1 set of 4
4 - print guadeloupe 2 set of 4
5 - print giles
6 - print trett
3ddd
$1
Eichholtz Prints
...nt tutti frutti
3 - eichholtz prints watson - set of 2
4 - eichholtz prints antique nautilus - set of 2
5 - eichholtz print tiara
3d_export
$5
Monster for printing
...monster for printing
3dexport
monster 3d model printing
3ddd
free
printed rug
...printed rug
3ddd
ковер
very creative printed rug
3ddd
free
Eichholtz Prints
...иал: бумага
габариты (вхш): 72 x 62 см
описание: print sweetmeat - постер в деревянной раме.
3 - prints varsity set of 2
арти
3ddd
free
Art Print Posters
...art print posters
3ddd
прованс
art print posters by patrician prints