Cults
![Skateboard Trucks](/previews/2984598.jpg)
Skateboard Trucks
by Cults
Last crawled date: 6 years, 3 months ago
NOTE: This is a concept model used for testing and a show model. Never ever use these as a replacement for the real thing! If you decide to try them out, be careful and use proper safety gear. Use at own risk.
This was a weekend project i did for fun and to get my mind of some other projects for a while.
I have printed both the Base and hanger aswell as the bushings. The skaterboard is a cheap one that i took the measurements form and used the existing screws, nuts and washers. There´s also a 195mm long M8 threaded rod that all the way thru that holds the wheel and basically the entire design is highly dependet on this rod. I have tried to take a differnt approach in regards of the orientation but you can print it anyway you like using support.
This one is printed in thick layers of Carbon Fiber infused Nylon with a high level of infill. Even though the CF will stabilize the "hanger" to a certain degree. Exposed to a high impact the Nylon will flex and the steel rod will most likely bend.
Full story available on my Patreon page.
Anyway great fun as a concept model project.
This was a weekend project i did for fun and to get my mind of some other projects for a while.
I have printed both the Base and hanger aswell as the bushings. The skaterboard is a cheap one that i took the measurements form and used the existing screws, nuts and washers. There´s also a 195mm long M8 threaded rod that all the way thru that holds the wheel and basically the entire design is highly dependet on this rod. I have tried to take a differnt approach in regards of the orientation but you can print it anyway you like using support.
This one is printed in thick layers of Carbon Fiber infused Nylon with a high level of infill. Even though the CF will stabilize the "hanger" to a certain degree. Exposed to a high impact the Nylon will flex and the steel rod will most likely bend.
Full story available on my Patreon page.
Anyway great fun as a concept model project.
Similar models
cults
free
![My personal Katana - Maker style](/t/2989129.jpg)
My personal Katana - Maker style
...ll you need is the 6 mm rod and... a lot of patience! :) all the best!
if you need, i'm ready to print it for you, just ask.
cults
free
![Closet Rod Hanger](/t/2981110.jpg)
Closet Rod Hanger
...nshape.com here: https://cad.onshape.com/documents/204a93ad8e8a1366f9f61248/w/b2d4cf3974161b627596d38b/e/d04dfcae64527b7a32ce769d
cults
free
![Dragonite Key Chain](/t/2993947.jpg)
Dragonite Key Chain
... prints that you made :)
and if you like this, follow and check out some of my other designs
//this design is based on pokemon
cults
free
![Zundapp bike suspension cap](/t/2981863.jpg)
Zundapp bike suspension cap
...ed, and since i painted it afterwords, i didnt bother to reprint.
the bushing is currently over 2 years in use, and still works!
cults
free
![Hook & Hanger System](/t/2984502.jpg)
Hook & Hanger System
...n be whatever you like. i used 0.2mm in my parts.
the percentage of infill you use depends on the strength you need. i used 30%.
cults
free
![SkateBoard](/t/2985984.jpg)
SkateBoard
...kateboard skateboarding skating
easy to print skateboard
you will need 2 throated bar, and 4 nylon bolt.
plus of course 2 trucs.
cults
$3
![HOT ROD](/t/2992017.jpg)
HOT ROD
...hot rod
cults
hot rod
i like hot rods and i made one very simple, i hope you like it
cults
free
![Chinese new year - rooster 2017](/t/2977710.jpg)
Chinese new year - rooster 2017
...anana yellow pla
share with us the prints that you made :)
and if you like this, follow and check out some of my other designs
cults
free
![Flower # 3DSPIRIT](/t/2975787.jpg)
Flower # 3DSPIRIT
...chniques make it possible to print a compact block which then unfolds in the manner of the hatching of a flower.
# 3dspirit.
cults
free
![Kerbal Figurine (Waving Pose)](/t/2978093.jpg)
Kerbal Figurine (Waving Pose)
...high.
timelapse print video (also have my kerbal mods on that youtube channel if you are like mods)
http://youtu.be/_zpcooour0u
Bushing
cults
free
![Little bush moa skeleton](/t/2993652.jpg)
Little bush moa skeleton
...nd war memorial museum, auckland, new zealand. bones from two separate moa skeletons (specimen 5511 and 5512) have been included.
cults
free
![Customizable Linear Bushing / Bearing - LM8UU, LM8LUU, LM12UU, LM12LUU, LM16UU, ... IGUS like](/t/2993838.jpg)
Customizable Linear Bushing / Bearing - LM8UU, LM8LUU, LM12UU, LM12LUU, LM16UU, ... IGUS like
... me doing more things. thanks!
banggood: https://goo.gl/zxgx3a
gearbest: https://goo.gl/ffe59f
aliexpress: https://goo.gl/bqli15
cults
free
![Zundapp bike suspension cap](/t/2981863.jpg)
Zundapp bike suspension cap
...suspension cap cults cap nylon spring suspension zundapp this bushing is printed for my oltimer zundapp bike. the cap...
cults
free
![COBRAY TERMINATOR PISTOL](/t/2975976.jpg)
COBRAY TERMINATOR PISTOL
...+ elastics) 3 x m3 x 10mm l barrel bushing (+ elastics) 1 x m4 x 35mm l grip...
cults
free
![Playseat Challenge steering wheel bar play remover.](/t/2990135.jpg)
Playseat Challenge steering wheel bar play remover.
...connects to the seat frame. one part is a bushing that goes around the outside and one part is...
cults
free
![Air Gun Mussy Design](/t/2981099.jpg)
Air Gun Mussy Design
...carbon tube 8mm od 7mm id 40mm long (bolt bushing 7mm id spring 60mm long (bolt spring) 2 small...
cults
$11
![Dan Wesson 0.43 KIT](/t/2987551.jpg)
Dan Wesson 0.43 KIT
...shots cylinder turns instead of the original one ball bushing doors of the replica are also reused without their...
cults
free
![Bungee Hooks for Basha / Tarp](/t/2984533.jpg)
Bungee Hooks for Basha / Tarp
...nters were down for a few hours
:(
!don't forget to check out my other designs and follow my daily kookoo uploads, enjoy ;)
cults
free
![Bubble Nest - Birdhouse](/t/2989369.jpg)
Bubble Nest - Birdhouse
...dcrumbs) this will facilitate the identification of the nest by birds.
designed by: [serena fanara](http://www.serenafanara.it/)
Danielnoree
cults
free
![Runcam 3 mount for OpenRC FPV Mini Quad](/t/2993825.jpg)
Runcam 3 mount for OpenRC FPV Mini Quad
...twitter: https://twitter.com/danielnoree google+: https://plus.google.com/u/1/+danielnoree facebook: https://www.facebook.com/dnoree/ thingiverse: https://www.thingiverse.com/barspin website: http://www.danielnoreecom ...
cults
free
![Austin Jack Lifting Point Cover](/t/2984799.jpg)
Austin Jack Lifting Point Cover
...youtube channel - https://www.youtube.com/user/danielnoree2 instagram https://www.instagram.com/danielnoree/ twitter https://twitter.com/danielnoree google+ https://plus.google.com/u/1/+danielnoree facebook...
cults
free
![Snowboard Binding Strap](/t/2989416.jpg)
Snowboard Binding Strap
...youtube channel - https://www.youtube.com/user/danielnoree2 instagram https://www.instagram.com/danielnoree/ twitter https://twitter.com/danielnoree google+ https://plus.google.com/u/1/+danielnoree facebook https://www.facebook.com/daniel.noree google+ openrc community https://plus.google.com/communities/112745535856143176146 facebook openrc group...
cults
free
![The Furry Vase](/t/2992552.jpg)
The Furry Vase
...the furry vase cults danielnoree vase furry test experiment experimental matterhackers zyyx based on...
cults
free
![Set Screw For Umbrella Drying Rack](/t/2978349.jpg)
Set Screw For Umbrella Drying Rack
...umbrella drying rack garden functional colorfabb ngen daniel noree danielnoree sweden sverige a friend needed a new set screw...
cults
free
![OpenRC F1 Dual Color McLaren Edition](/t/2982333.jpg)
OpenRC F1 Dual Color McLaren Edition
...openrc f1 dual color mclaren edition cults car danielnoree daniel_noree formula1 formula_1 madebysweden openrc race radiocontrolled remotecontrolled sverige...
cults
free
![Runcam 3 Frame](/t/2989147.jpg)
Runcam 3 Frame
...what i do, please consider supporting me on patreon: https://www.patreon.com/danielnoree basic frame to mount the runcam 3 on a...
cults
free
![Handle for 1966 HD M50S](/t/2978427.jpg)
Handle for 1966 HD M50S
...youtube channel - https://www.youtube.com/user/danielnoree2 instagram https://www.instagram.com/danielnoree/ twitter https://twitter.com/danielnoree google+ https://plus.google.com/u/1/+danielnoree facebook...
cults
free
![Palmiga OpenRC F1 Low Profile Differential Rims](/t/2993641.jpg)
Palmiga OpenRC F1 Low Profile Differential Rims
...for openr/c formula 1 print-files (after release) go here: https://pinshape.com/users/18846-danielnoree for my designs check out http://www.thingiverse.com/palmiga/designs & https://www.instagram.com/rubber3dprinting/ due...
Skateboard
cults
free
![SkateBoard](/t/2985984.jpg)
SkateBoard
...kateboard skateboarding skating
easy to print skateboard
you will need 2 throated bar, and 4 nylon bolt.
plus of course 2 trucs.
cults
free
![Skateboard Wall Mount](/t/2979464.jpg)
Skateboard Wall Mount
...skateboard wall mount
cults
skateboard skateboarding mount wall_mount
wall mount for skateboard decks
cults
$3
![SkateBoard-Dabord](/t/2984283.jpg)
SkateBoard-Dabord
...ailable soon.
this is a strenghtful little skateboard inspired by the penny board.
you can easilly make littles tricks and skate
cults
$3
![Skateboard Deck](/t/2987628.jpg)
Skateboard Deck
...skateboard deck
cults
to scale deck of skateboard, can be scaled down and printed (includes trucks and wheels)
cults
free
![gopro 2 skateboard](/t/2990131.jpg)
gopro 2 skateboard
...gopro 2 skateboard
cults
set a gopro on a skateboard
cults
$4
![Roller Skateboards](/t/2984351.jpg)
Roller Skateboards
...home decor cakedecor 3dp 3dprint 3dmodel
roller skaets made for cake top, model and print just for fun, model in mode and 3ds max
cults
free
![BOX SKATEBOARD BY IWAKINUP](/t/2978183.jpg)
BOX SKATEBOARD BY IWAKINUP
...ard!
assemble a real skateboard printed in 3d using this kit, then roll!
video here: https://www.youtube.com/watch?v=fw-jqyandbo
cults
free
![Trucks for Z-18 Penny Skateboard](/t/2987908.jpg)
Trucks for Z-18 Penny Skateboard
...trucks for z-18 penny skateboard
cults
trucks for z-18 penny skateboard
trucks for z-18 penny skateboard
cults
free
![Skateboard](/t/2976094.jpg)
Skateboard
... download this 3d printer file and make it with 3d printing. let’s enjoy!
this 3d model was originally shared on poly by google.
cults
$16
![Skateboard Hairpin legs support](/t/2990986.jpg)
Skateboard Hairpin legs support
...
easy 3d printable skateboard hairpin legs support.
1cm rod.
use about 40cm height.
use normal wood screw to secure rod if loose.
Truck
cults
$1
![cabin of the truck](/t/2975488.jpg)
cabin of the truck
...cabin of the truck
cults
cabin of the truck cabin truck
such here cabin of the truck
cults
free
![Pickup Truck](/t/2992484.jpg)
Pickup Truck
...pickup truck
cults
pickup truck
pickup truck
cults
free
![Truck](/t/2977879.jpg)
Truck
... truck. tires are secured via m3-0.5 22mm socket head screws.
follow me on instagram:
https://www.instagram.com/brian_strickler/
cults
free
![Truck Planter](/t/2986492.jpg)
Truck Planter
...er
cults
planter truck
you can finally prototype your pop-up flower shop with the truck planter.
originally created by makerbot.
cults
$3
![Lego duplo - Truck - Truck -](/t/2979148.jpg)
Lego duplo - Truck - Truck -
...rd: 1x
- before: 1x
- piece "8x" - thick: 1x
- room "4x" - thick: 4x
- piece "4x" - end: 1x
cults
free
![quarry trucks](/t/2983640.jpg)
quarry trucks
...quarry trucks
cults
toys
quarrry trucks for train track type brio
cults
free
![Dumper/tipper truck](/t/2987269.jpg)
Dumper/tipper truck
...dumper/tipper truck
cults
dumper/tipper truck
dumper/tipper truck
cults
free
![Wheel V2 for Truck](/t/2982798.jpg)
Wheel V2 for Truck
...wheel v2 for truck
cults
fancier wheel for [my truck](https://cults3d.com/en/game/truck)
cults
$1
![Logo truck sprinter](/t/2992375.jpg)
Logo truck sprinter
...logo truck sprinter
cults
logo truck car van rooms
logo for mercedes sprinter van or truck
cults
$2
![Dump truck](/t/2990860.jpg)
Dump truck
...mp truck to assemble. the axis of the wheels will be made with small m4 threaded rods and cap nuts. me personally i put stainless
Trucks
cults
$1
![cabin of the truck](/t/2975488.jpg)
cabin of the truck
...cabin of the truck
cults
cabin of the truck cabin truck
such here cabin of the truck
cults
free
![Pickup Truck](/t/2992484.jpg)
Pickup Truck
...pickup truck
cults
pickup truck
pickup truck
cults
free
![Truck](/t/2977879.jpg)
Truck
... truck. tires are secured via m3-0.5 22mm socket head screws.
follow me on instagram:
https://www.instagram.com/brian_strickler/
cults
free
![Truck Planter](/t/2986492.jpg)
Truck Planter
...er
cults
planter truck
you can finally prototype your pop-up flower shop with the truck planter.
originally created by makerbot.
cults
$3
![Lego duplo - Truck - Truck -](/t/2979148.jpg)
Lego duplo - Truck - Truck -
...rd: 1x
- before: 1x
- piece "8x" - thick: 1x
- room "4x" - thick: 4x
- piece "4x" - end: 1x
cults
free
![quarry trucks](/t/2983640.jpg)
quarry trucks
...quarry trucks
cults
toys
quarrry trucks for train track type brio
cults
free
![Dumper/tipper truck](/t/2987269.jpg)
Dumper/tipper truck
...dumper/tipper truck
cults
dumper/tipper truck
dumper/tipper truck
cults
free
![Wheel V2 for Truck](/t/2982798.jpg)
Wheel V2 for Truck
...wheel v2 for truck
cults
fancier wheel for [my truck](https://cults3d.com/en/game/truck)
cults
$1
![Logo truck sprinter](/t/2992375.jpg)
Logo truck sprinter
...logo truck sprinter
cults
logo truck car van rooms
logo for mercedes sprinter van or truck
cults
$2
![Dump truck](/t/2990860.jpg)
Dump truck
...mp truck to assemble. the axis of the wheels will be made with small m4 threaded rods and cap nuts. me personally i put stainless
Hanger
cults
free
![Baby hanger / Baby Hanger](/t/2980879.jpg)
Baby hanger / Baby Hanger
...hanger
cults
hanger baby
a small hanger for baby very simple but very practical! i printed about thirty for my future daughter;).
cults
free
![Universal Hanger](/t/2975099.jpg)
Universal Hanger
...universal hanger
cults
universal hanger
universal hanger
cults
$2
![Tie Hanger](/t/2980907.jpg)
Tie Hanger
...nt tie hanger, very easy to printing.
the size of the hook is 30 mm inside (1 inch).
use the scale to adjust
have fun
cults
free
![Partition Hanger](/t/2977783.jpg)
Partition Hanger
...partition hanger
cults
partition hanger 3d printed
cults
free
![S Hanger Backpack desk hanger](/t/2987606.jpg)
S Hanger Backpack desk hanger
...kpack desk hanger
cults
this is hanger for backpack or something like that!
it can be used hanging bag at edge of desk or table
cults
$1
![Bathroom hanger](/t/2982591.jpg)
Bathroom hanger
...bathroom hanger
cults
bathroom hanger
design in catia v5
cults
free
![Mini Hanger](/t/2992218.jpg)
Mini Hanger
...mini hanger
cults
a small hanger that prints in a couple minutes.
cults
$2
![Tie hanger](/t/2984524.jpg)
Tie hanger
...tie hanger
cults
tie hanger
3d model format: stl
cults
free
![PVC Pipe Hanger](/t/2989624.jpg)
PVC Pipe Hanger
...pvc pipe hanger
cults
pvc pipe hanger
pvc pipe hanger
cults
free
![partition board hanger](/t/2987335.jpg)
partition board hanger
...partition board hanger
cults
partition board hanger
partition board hanger
Base
cults
free
![Socket Base](/t/2989520.jpg)
Socket Base
...socket base
cults
socket base
socket base
cults
free
![Base cork](/t/2983321.jpg)
Base cork
...base cork
cults
base cork
base cork
cults
$15
![Base for sculptures](/t/2975785.jpg)
Base for sculptures
...base for sculptures
cults
base coaster sculpture stand pedestal podstavka
high poly base for sculpture.
cults
free
![prédio base](/t/2988357.jpg)
prédio base
...prédio base
cults
prédio base testando o site
cults
free
![PALPATINE BASE](/t/2985551.jpg)
PALPATINE BASE
...palpatine base
cults
pedestal chest palpatine starwars
base for the palpatine bust.
cults
$2
![Given with base](/t/2990775.jpg)
Given with base
...given with base
cults
dice with base
adornment that can fulfill the function of pisa papers.
cults
$2
![smart base -arc_03f_volonoi-](/t/2985151.jpg)
smart base -arc_03f_volonoi-
...smart base -arc_03f_volonoi-
cults
smart base -arc_03f_volonoi-
smart base -arc_03f_volonoi-
cults
$2
![smart base -gouge_01f_dot-](/t/2989741.jpg)
smart base -gouge_01f_dot-
...smart base -gouge_01f_dot-
cults
smart base -gouge_01f_dot-
smart base -gouge_01f_dot-
cults
$2
![smart base -arc_10f_volonoi-](/t/2993507.jpg)
smart base -arc_10f_volonoi-
...smart base -arc_10f_volonoi-
cults
smart base -arc_10f_volonoi-
smart base -arc_10f_volonoi-
cults
free
![Coaster weave and base](/t/2984629.jpg)
Coaster weave and base
...coaster weave and base
cults
coaster weave and base
coaster weave and base