Sk Go2 Stepper Mounts. by Portzal

Last crawled date: 3 years, 5 months ago

I have designed the mounts so I could use 4 bolts to hold down the steppers instead of 1,
the 2040 frame needs to be notched to allow sufficient adjustment for belt tension.
See photos for fitment.
you will need 4 x M3 x 50mm bolts for the taller post. I used the M3 x 40mm (originally meant for the taller post) for the short post. They both end up being about 1mm longer than they need, so the easiest option is to use some washers to pack them. I ground mine down to the correct length, but I wouldn’t advise doing that unless it is something you are already comfortable with doing.
.step file included as well so the height of the posts can be reduced to suit the stock installation.
These are packers only, not stand alone mounts.
Added Tensioner for X and Y mounts. you will need 2 x M4 x 16 bolts and 2 X M4 nuts
Added mounts for duel Z stepper conversion.
Added 2020 extrusion brackets. you will need 4 x 2020 Bracket and 2 x 2020 Bracket bottom. Both are in the .dxf file.