SJ M10 - PROTECTION LENS by RubensCampello 3d model
Warning. This content is not moderated and could be offensive.
m4
3dmdb logo
Thingiverse
SJ M10 - PROTECTION LENS  by RubensCampello

SJ M10 - PROTECTION LENS by RubensCampello

by Thingiverse
Last crawled date: 2 years, 11 months ago
Amigos, compartilho minha idéia de manter a boa camera SJ M10 protegida. O suporte é feito para ser acoplado em drone racer mais pode também ser usado em outros locais . A ideia partiu da necessidade de manter a camera com a lente protegida, já que a substituição de peças muitas vezes é inviável.
Usei uma case a prova d'agua para retirar apenas a parte preta da borda de proteção , usei até mesmo os parafusos originais da case. A SJM10 é colocada de forma lateral e de fácil colocação . Espero ter ajudado!
Obs.: As duas partes devem ser unidas com cola a base de cianocrilato e o plástico é ABS impresso a 100%.
Existe um erro no arquivo maior que não consegui corrigir na modelagem mais porque o reparador do Neftabb não esta mais instalando no meu computador, mais eu imprimi e saiu perfeita.
Friends, I share my idea of ​​keeping the good SJ M10 camera protected. The bracket is made to be docked in drone racer plus can also be used in other locations. The idea came from the need to keep the camera with the lens protected, since replacement parts are often not feasible.
I used a waterproof case to remove only the black part from the protective edge, I even used the original case screws. The SJM10 is placed side and easy to place. Hope this helps!
Note: The two parts must be bonded with cyanoacrylate based glue and the plastic is ABS printed at 100%.
There is an error in the larger file that I could not fix in the modeling anymore because the Neftabb repairman is no longer installing on my computer, but I printed and left perfect.

Tags