single row connector mold by blmak

Last crawled date: 3 years ago

This is a mold designed for protecting the soldering of a pinhead connector, it gives a cheap and fast way to make elastic connectors with hot glue.
The mold must be printed in ABS or some other plastic with high melting point. After printing is a good idea to smooth the surfaces with acetone and is very important use oil to prevent the hot glue to stick to the mold.
To make the mold, a some pressure is needed while cooling, it takes about two, three minutes to cold down. After making the mold, the hole can be opened with a small drill bit to be reused.
There are two molds, for 4 and 5 contacts.