Simplify3D Snapmaker 2.0 A350 Profile by CarvedArt

Last crawled date: 3 years, 4 months ago

YOU ARE RESPONSIBLE FOR ANY DAMAGE THAT YOU CAUSE TO YOUR PRINTER - This is the profile that I use everyday for the Snapmaker 2.0 A350 with excellent results and zero issues. I may update if I implement any improvements. Any and all suggestions are welcome and may be included as well.
A Simplify3D profile for the Snapmaker 2.0 A350 Printer
• Includes settings for PLA, ABS, PVA and Nylon
• Includes commented custom starting and ending scripts:

; Snapmaker 2.0 startingGcode
M140 S[bed0_temperature] ; Set heated bed temp
M104 S[extruder0_temperature] T0 ; Set extruder temp
G28 ; Home all axes
M107 ; Turn fan off
G90 ; Set all axes to absolute
G1 X-12 Y10 F3000 ; Move to X-12 & Y10 & set the feedrate to 3000mm/min
G1 Z0 F1800 ; Move to Z0 & set the feedrate to 1800mm/min
M109 S[extruder0_temperature] T0 ; Wait for extruder temp
M190 S[bed0_temperature] ; Wait for heated bed temp
G92 E0 ; Set extruder position to 0
G1 Z0.15 F1200 ; Move Z to .15mm
G1 E11 F300 ; Extrude 11mm of filament at 300mm/min
G1 X10 E20 F1200 ; Extrude 20mm and slow wipe extruder
G1 Z0.5 F4000 ; Lift Z to .5mm
G92 E-1 ; Set filament position to -1
G1 E0 F200 ; Move filament position to 0 & Prime the extruder
; End of startingGcode

; Snapmaker 2.0 endingGcode
G1 E-1 F300 ; Retract the filament a bit before lifting the nozzle
M104 S0 ; Extruder off
M140 S0 ; Heated bed off
M84 ; Disable steppers
M107 ; Turn fan off
G28 Z ; Home Z
; End of endingGcode
• Does NOT include backlash compensation in starting script (Example):M425 X0.035 Y0.035 Z0.035 F1 S0
NOTE: Backlash compensation should only be added if you have performed a backlash calibration and use the numbers from your test. Simply add the gcode to the beginning of your Starting Script.