Thingiverse
Simple Rifle Attachment for "THE NEST" Vive Controller, designed by Alien Identity. by Alien_Identity
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a simple rifle attachment for the Vive controller, for use with "THE NEST". It is light and it fits together with dove-tail joints, and could be glued together. The sliding joibts have been designed with 0.3mm clearance, so they should slide together easily.
I have designed a 3mm hole with a M3 x0.5 pitch thread, although I don't know if the thread was lost in the conversion to STL files. Use a 3mm machine screw to attach part 4 from above after the vive controller is placed on the angled surface. Use a M3 x 0.5mm pitch x 25mm long or 30mm long.
I have designed a 3mm hole with a M3 x0.5 pitch thread, although I don't know if the thread was lost in the conversion to STL files. Use a 3mm machine screw to attach part 4 from above after the vive controller is placed on the angled surface. Use a M3 x 0.5mm pitch x 25mm long or 30mm long.