Thingiverse
Simple Push Fit Joint Tolerance/Fit Test (Male/Female) by CaptinDynamo
by Thingiverse
Last crawled date: 3 years, 11 months ago
This is a simple print you can use to test the tolerances and how tight you want the fit when designing 3D models with push-fit joints. They are also keyring mountable/atachable!
It is reccomended you print a normal tolerance test first, such as this: https://www.thingiverse.com/thing:2318105, So you do not need to print all the 'female' parts.
You need to print:
1x MaleJoint.stl
AND
1x +0.0mm - +0.5mm
OR
1x each of the models from +0.0mm - +0.5mm (or as needed)
Follow me on Twitter! twitter.com/3DPrintingzzz
It is reccomended you print a normal tolerance test first, such as this: https://www.thingiverse.com/thing:2318105, So you do not need to print all the 'female' parts.
You need to print:
1x MaleJoint.stl
AND
1x +0.0mm - +0.5mm
OR
1x each of the models from +0.0mm - +0.5mm (or as needed)
Follow me on Twitter! twitter.com/3DPrintingzzz