Thingiverse
Simple Pulley - Fully printable pulley/tackle by MaceX
by Thingiverse
Last crawled date: 4 years, 10 months ago
Simple fully printable pulley. No hardware parts required.
You can combine with more pulleys to be able to lift heavier weigths.
Recomended string width: max 4mm
Recomend to print with supports, as the edges are slightly tapered.
You can combine with more pulleys to be able to lift heavier weigths.
Recomended string width: max 4mm
Recomend to print with supports, as the edges are slightly tapered.