Thingiverse
Simple holder for 1.3 inch 128x64 OLED display module by maximilliampere
by Thingiverse
Last crawled date: 4 years, 2 months ago
The display module attaches on the front face with four M3x8 screws and nuts. M3x6 screws should also work, but may not get through the M3 nuts all the way.
I added space for four M6 nuts in the bottom of the holder to add some weight and a make it more stable. You can also put some rubber foam on the bottom so it doesn´t slide around.
My display has the SH1106 chip but if the SSD1306 chip hardware on the backside of the module isn´t all to different it should work fine too.
I added space for four M6 nuts in the bottom of the holder to add some weight and a make it more stable. You can also put some rubber foam on the bottom so it doesn´t slide around.
My display has the SH1106 chip but if the SSD1306 chip hardware on the backside of the module isn´t all to different it should work fine too.