Cults
![Simple aircraft (enforced)](/previews/2980323.jpg)
Simple aircraft (enforced)
by Cults
Last crawled date: 6 years, 3 months ago
Remixed simple aricraft
This thing was designed to be easy to print and for small kids: without sharp edges and durable.
All connections were adjusted to be connected by M3 bolts
Use 5 bolts M3x12mm (or it can be 10mm but 2 of them is better to have 12 or 15mm)
There are mods v2 and v3. Difference is in 2 parts - v2 is vertical printed aircraft fuselage, v3 has horisontal aircraft fuselage
To print v2(vertical fuselage) use parts:
airplain2-wheel.stl
airplain2-p4.stl
airplain2-p3.stl
airplain2-p2.stl - orient it to print vertically but use brim or other tricks to keep it verical (I've used only 10mm brim)
airplain2-p1.stl
To print v3(horisontal fuselage) use parts:
airplain2-wheel.stl
airplain2-p4.stl
airplain2-p3.stl
airplain3-p2.stl - orient it to print horizontally
airplain3-p1.stl
This thing was designed to be easy to print and for small kids: without sharp edges and durable.
All connections were adjusted to be connected by M3 bolts
Use 5 bolts M3x12mm (or it can be 10mm but 2 of them is better to have 12 or 15mm)
There are mods v2 and v3. Difference is in 2 parts - v2 is vertical printed aircraft fuselage, v3 has horisontal aircraft fuselage
To print v2(vertical fuselage) use parts:
airplain2-wheel.stl
airplain2-p4.stl
airplain2-p3.stl
airplain2-p2.stl - orient it to print vertically but use brim or other tricks to keep it verical (I've used only 10mm brim)
airplain2-p1.stl
To print v3(horisontal fuselage) use parts:
airplain2-wheel.stl
airplain2-p4.stl
airplain2-p3.stl
airplain3-p2.stl - orient it to print horizontally
airplain3-p1.stl
Similar models
cults
free
![Clarinet Barrel Pickup](/t/2980257.jpg)
Clarinet Barrel Pickup
...2 well. the barrel should stay airproof. p2 is a seal (use a drop of acetone to glue it properly), p3 fits in a mono 3.5 mm jack.
cults
free
![PS Vita Cartridge Holder](/t/2980439.jpg)
PS Vita Cartridge Holder
...rays took 1 hour each and the letters took about 3 minutes to print at standard (.18mm layer height) setting. all at 100% infill.
cults
free
![Drakon reinforced extruder](/t/2975620.jpg)
Drakon reinforced extruder
...design
groove mount adaptors can be used from the original design. i've attached one for e3d just what i used as a reference.
cults
free
![Countersink Handle](/t/2977842.jpg)
Countersink Handle
...a layer height of 0,15.
maybe you will need a brim for the mainbody.
i chose pet-g filament becouse of the good layer adhesion.
cults
free
![3DRC RC Jet Boat Prototype](/t/2990088.jpg)
3DRC RC Jet Boat Prototype
...hieved with the 10mm one.
i recommend tapping all holes before bolting the parts together to reduce the chance of damaging them.
cults
free
![Geared Extruder 2](/t/2975423.jpg)
Geared Extruder 2
...s
1x m8 bolt for the driver gear. see picture for the dimensions
1x filament driver gear
3x bearing 608z
1x nema 17 stepper motor
cults
free
![Bike Light](/t/2990089.jpg)
Bike Light
...1.8mm handlebar. use m3 x 12 bolts to secure it. for best quality, print in the orientations in the picture, and enable supports.
cults
free
![kea Brio railroad crossing](/t/2982134.jpg)
kea Brio railroad crossing
... simplify printing.
use m3 bolts/nuts to connect parts and for axis.
wanted to make it durable and easy to repaire/replace parts.
cults
free
![Ercoupe Golden Age Aircraft](/t/2989242.jpg)
Ercoupe Golden Age Aircraft
...nd on the landing gear the right way, you can use nuts and bolts as weight.
all the .stl files have been rotated for easy print.
cults
free
![Raclette for snow](/t/2977691.jpg)
Raclette for snow
...this 2 ° solution of printing makes it possible to remove the constraints and deformations possible according to the used printer
Enforced
cults
free
![Prance Vichard, Human Syndicate Enforcer](/t/2988595.jpg)
Prance Vichard, Human Syndicate Enforcer
...prance vichard, human syndicate enforcer
cults
prance vichard human syndicate enforcer
prance vichard, human syndicate enforcer
cults
$10
![PIG Badge](/t/2979091.jpg)
PIG Badge
...r and a picture of a pig. a friend of mine has a father in law in law enforcement and requested i make this badge to give to him.
cults
free
![Supreme Court Building](/t/2986508.jpg)
Supreme Court Building
.... feel the weight of power in your hands as you discuss the court's landmark decisions.
this model was designed by makerbot.
cults
free
![For Honor Lawbringer Helm - Knight](/t/2981919.jpg)
For Honor Lawbringer Helm - Knight
...ltimate punishment for lawlessness. they will go wherever they are needed – pray that you are on the right side when they arrive.
cults
free
![Titan + bltouch mount compatible with greg's carriage](/t/2979700.jpg)
Titan + bltouch mount compatible with greg's carriage
...ing.
do not put extruder fan like in the pictures it will melt with the extruder block. :-)
hope it results useful for others.
cults
free
![Save pangolins](/t/2982784.jpg)
Save pangolins
...tion.
https://www.facebook.com/paperworkers
https://www.facebook.com/automata.create
https://www.youtube.com/watch?v=fkwxolbfxpi
Airplane
cults
free
![Airplane](/t/2975726.jpg)
Airplane
... download this 3d printer file and make it with 3d printing. let’s enjoy!
this 3d model was originally shared on poly by google.
cults
free
![Airplane](/t/2980826.jpg)
Airplane
... download this 3d printer file and make it with 3d printing. let’s enjoy!
this 3d model was originally shared on poly by google.
cults
free
![Airplane](/t/2979520.jpg)
Airplane
... download this 3d printer file and make it with 3d printing. let’s enjoy!
this 3d model was originally shared on poly by google.
cults
$5
![Lego - Plane - Airplane - With fastener - Duplo](/t/2979114.jpg)
Lego - Plane - Airplane - With fastener - Duplo
...eel: 2x
little reminder:
for lego of standard size the scale is to be set at 50% (so the parameters are divisible by 2)
cults
$13
![Snap-Fit Passenger Airplane](/t/2979245.jpg)
Snap-Fit Passenger Airplane
...ewest aircraft to date.
the wings in this model are bent upwards replicating flight conditions that the real aircraft encounters.
cults
free
![RC Airplane Control Horns](/t/2987242.jpg)
RC Airplane Control Horns
...be pushed through a slot cut in foam. big horns need screws to attach. small horns can use screws or 'pins' on the plate.
cults
free
![RC airplane wheel chocks.](/t/2978001.jpg)
RC airplane wheel chocks.
...wheel chocks.
cults
rc scale chocks
wheel chocks for rc planes. these fit 114 mm/4,5" wheels. scale up or down as necessary.
cults
$1
![Triple airplane propeller or wind turbine](/t/2984250.jpg)
Triple airplane propeller or wind turbine
... blades
75 mm radius
4 mm circular axis
3 blades are to be glued
scaled for other dimensions
step 45 °
glue with cynoacrilate gel
cults
free
![The Transoceanic](/t/2986475.jpg)
The Transoceanic
...the transoceanic cults airplane flight plane crossing an ocean was never possible till...
cults
$22
![3D Toy propeller](/t/2988713.jpg)
3D Toy propeller
...toy propeller plane 3d stl model of a toy airplane propeller, which was modelled based on actual airplane...
Aircraft
cults
$2
![soclephone aircraft](/t/2978687.jpg)
soclephone aircraft
...soclephone aircraft
cults
soclephone aircraft
soclephone aircraft
cults
free
![Aircraft](/t/2992582.jpg)
Aircraft
...lts
aircraft toy
simple aricraft
this thing was designed to be easy to print and for small kids: without sharp edges and durable.
cults
free
![Aircraft support](/t/2987113.jpg)
Aircraft support
...aircraft support
cults
aircraft plane support presentation
presentation support for your favorite aircraft models
cults
free
![Rafale Aircraft](/t/2977211.jpg)
Rafale Aircraft
...s
plane gust fighter jet war plane aircraft
model for exhibition of the french rafale.
i am not responsible for a bad impression.
cults
free
![Easy to print Concept Aircraft](/t/2977471.jpg)
Easy to print Concept Aircraft
...easy to print concept aircraft
cults
easy to print concept aircraft
easy to print concept aircraft
cults
free
![Aircraft carrier](/t/2976432.jpg)
Aircraft carrier
...craft carrier
cults
art toy army armed plane boat ship fly sea
airplane carrier, original model.
contact: mvt89300@gmail.com
cults
$8
![Futuristic aircraft DIY 3d model](/t/2984158.jpg)
Futuristic aircraft DIY 3d model
...model
cults
diy aircraft fly create hobby 3d model car airplane
futuristic aircraft diy 3d model for 3d printing
7 parts to print
cults
free
![Airbus Aircraft Coffee Stencils or Christmas Ornaments](/t/2983417.jpg)
Airbus Aircraft Coffee Stencils or Christmas Ornaments
...mas ornaments
cults
airbus aircraft coffee stencils or christmas ornaments
airbus aircraft coffee stencils or christmas ornaments
cults
$6
![Cessna aircraft VHF antenna base](/t/2976396.jpg)
Cessna aircraft VHF antenna base
...ll scale vhf antenna base for a cessna aircraft. this is only a cosmetic antenna and is used on scale radio controlled aircrafts.
Plane
cults
free
![Plane of Chains](/t/2988097.jpg)
Plane of Chains
...plane of chains
cults
plane of chains
plane of chains
cults
free
![Bi Plane](/t/2982774.jpg)
Bi Plane
...bi plane
cults
bi plane
bi plane
cults
free
![Model plane](/t/2991885.jpg)
Model plane
...model plane
cults
model plane
model plane
cults
free
![A10 Plane](/t/2984078.jpg)
A10 Plane
...a10 plane
cults
a10 warthog plane. a classic!
cults
free
![RC Plane Stand](/t/2983309.jpg)
RC Plane Stand
...rc plane stand
cults
rc plane stand
rc plane stand
cults
free
![Skis for RC planes](/t/2992513.jpg)
Skis for RC planes
...skis for rc planes
cults
skis for rc planes
skis for rc planes
cults
free
![Little Jet Plane](/t/2978700.jpg)
Little Jet Plane
...little jet plane
cults
little jet plane
little jet plane
cults
$5
![Paper Plane Pendant](/t/2977067.jpg)
Paper Plane Pendant
...his is a cute little paper plane pendant like one of the planes you used to make as a kid. well at least i made a lot of them...
cults
$2
![Paper Plane Nose](/t/2978779.jpg)
Paper Plane Nose
...
avion
this is a nose cone for the front of a paper plane. it will help your plane fly great distances. instead of short flights.
cults
free
![Playmobil plane landing gear](/t/2978895.jpg)
Playmobil plane landing gear
...playmobil plane landing gear
cults
playmobil plane landing gear
playmobil plane landing gear
Simple
cults
free
![Simple Vases](/t/2989549.jpg)
Simple Vases
...simple vases
cults
simple vases
simple vases
cults
free
![Simple Vase](/t/2983805.jpg)
Simple Vase
...simple vase
cults
simple vase
simple vase
cults
free
![simple bridge](/t/2977327.jpg)
simple bridge
...simple bridge
cults
simple bridge
simple bridge
cults
free
![Simple Pokeball](/t/2978094.jpg)
Simple Pokeball
...simple pokeball
cults
simple pokeball
simple pokeball
cults
free
![Simple Hook](/t/2978292.jpg)
Simple Hook
...simple hook
cults
simple hook
simple hook
cults
free
![Simple Steve](/t/2982748.jpg)
Simple Steve
...simple steve
cults
simple steve
simple steve
cults
free
![Simple animal_Penguin](/t/2975136.jpg)
Simple animal_Penguin
...simple animal_penguin
cults
simple animal_penguin
simple animal_penguin
cults
free
![Simple Elephant](/t/2993427.jpg)
Simple Elephant
...simple elephant
cults
simple elephant
simple elephant
cults
free
![Simple Pizza](/t/2990337.jpg)
Simple Pizza
...simple pizza
cults
simple pizza simple pizza
this is a 3d model of a pizza i made!
cults
free
![simple flange](/t/2984490.jpg)
simple flange
...simple flange
cults
flabby
simple flask