Thingiverse
Silicone Sock for Mk10 Hotends by pyr0ball
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is a mold for making Silicone Sock insulators for the generic Mk10 heater blocks.
You'll need a high-temperature silicone to work with, either a two part mixture, or an RTV single part will work. I used this kind
Other supplies:
Latex gloves
Disposable bowl/dish
Dish Soap
2x M3 12mm screws
Optional but very helpful: 1½" Ratcheting C-Clamp
Check this post for instructions on how to use this mold
Check out my other socks for other hotends:
Generic OEM E3D Hotend
CR-10 Stock Hotend
Generic Mk8 Hotend
You'll need a high-temperature silicone to work with, either a two part mixture, or an RTV single part will work. I used this kind
Other supplies:
Latex gloves
Disposable bowl/dish
Dish Soap
2x M3 12mm screws
Optional but very helpful: 1½" Ratcheting C-Clamp
Check this post for instructions on how to use this mold
Check out my other socks for other hotends:
Generic OEM E3D Hotend
CR-10 Stock Hotend
Generic Mk8 Hotend