Thingiverse
Silica Gel Dry Box by aJ_Berlin
by Thingiverse
Last crawled date: 3 years, 3 months ago
Dry box for my SMD parts and for my filament boxes.
Size (LWH): 120 x 80 x 60 mm
Screws: M3 (head diameter <= 6mm, Length > 12)
Includes a mounting hole for these cheap combined temperature and humidity sensors.
I use a 0.2mm gap between all sides of each wall to the box. But I found out that my printer is not calibrated in the z-height. The walls should actually be 2.4mm thick, but were then just under 2.6mm thick. Therefore I printed the walls again with Z scaled to 80%. If your printer is calibrated correctly, it should fit.
Please be careful not to force the walls into place. The supports could break off (and I know what I'm talking about ;-) ).
Size (LWH): 120 x 80 x 60 mm
Screws: M3 (head diameter <= 6mm, Length > 12)
Includes a mounting hole for these cheap combined temperature and humidity sensors.
I use a 0.2mm gap between all sides of each wall to the box. But I found out that my printer is not calibrated in the z-height. The walls should actually be 2.4mm thick, but were then just under 2.6mm thick. Therefore I printed the walls again with Z scaled to 80%. If your printer is calibrated correctly, it should fit.
Please be careful not to force the walls into place. The supports could break off (and I know what I'm talking about ;-) ).
Similar models
thingiverse
free
Test calibration by 3DMasteer
...se latter should be printing fine too. no need to print any rafts because this will also test the first layer print adhesion too.
thingiverse
free
Calibration cube by jpvlsmv
...also (crudely) estimates the overhang angle for this material at the top, where the edge is nearly tangent to the printing plane.
thingiverse
free
Calibration Open Box by CursingFisherman
...o assist with calibrating printer settings. it has very thin walls, so it should print relatively quickly depending on settings.
thingiverse
free
Delta printer calibration (size of the print) step per mm by Bob-In
...rial enough clear ? what can i change or add to make it better ?
is that helped ? not enough ? do it again and again until it is
thingiverse
free
Smart Calibration Cube 40x40x20mmx0.8mm - You can use it like Small Storage Cube Box with Lid
...calibration box dimensions:
outside: x: 40mm, y: 40mm z: 20mm
inside: x: 38.4mm, y: 38.4mm z: 19.2mm
walls: 0.8mm, bottom:0.8mm
thingiverse
free
Customizable Calibration Box for SLA printers by ccox
..., drain diameter, labels, and text indention.
the 20x20x10mm version with drains, uses less than 7ml of resin on my moai printer.
thingiverse
free
Printer Square Calibration by WesleyLuk90
...square calibration by wesleyluk90
thingiverse
print to calibrate square holes and walls
holes should be 10mm
walls should be 2mm
thingiverse
free
40 x 80 x 40mm Calibration Object by SDCPs
...x 80 x 40mm calibration object by sdcps
thingiverse
see if your x, y, and z axis are calibrated...is your object 40 x 80 x 40mm?
grabcad
free
Candle holder 2
...candle holder 2
grabcad
x*76+y*76+z*80 = 232.00mm
wall thickness = 4.00mm
thingiverse
free
Calibration Box by VeryHappyRobot
...calibration box by veryhappyrobot
thingiverse
i designed this box for printer calibration.
Silica
3d_export
$10
vray glass cup
...primary constituent of sand. soda-lime glass, containing around 70% silica accounts for around 90% of manufactured glass. the term...
3d_export
$5
filament dry box
...within the box to keep the filament dry. without silica this box will not solely keep the filament...
thingiverse
free
SAO Silica stencil
...sao silica stencil
thingiverse
silica stencil
thingiverse
free
Silica Gel Container
...silica gel container
thingiverse
silica gel container
thingiverse
free
Caja para silica gel - silica gel box by pololoz
...caja para silica gel - silica gel box by pololoz
thingiverse
caja para silica gel.
thingiverse
free
silica gel box by TK_DESIGN
...silica gel box by tk_design
thingiverse
silica gel box
thingiverse
free
Silica Gel Containers by xsgroup
...silica gel containers by xsgroup
thingiverse
silica gel containers...
thingiverse
free
Silica Gel Container by singwanlew
...silica gel container by singwanlew
thingiverse
silica gel container for center of the spool hole.
thingiverse
free
Silica Gel Box by Korgano
...fill this box with silica gel to keep your filament dry.
it features a hole in the middle which increases the surface of the box.
thingiverse
free
Silica gel case (Dreyer) by kmltbtozgl
...silica gel case (dreyer) by kmltbtozgl
thingiverse
silica gel box
Aj
design_connected
$11
AJ Table Lamp
...aj table lamp
designconnected
louis poulsen aj table lamp computer generated 3d model. designed by jacobsen, arne.
design_connected
$10
AJ Floor Lamp
...aj floor lamp
designconnected
louis poulsen aj floor lamp computer generated 3d model. designed by jacobsen, arne.
design_connected
$9
AJ Wall Lamp
...aj wall lamp
designconnected
louis poulsen aj wall lamp computer generated 3d model. designed by jacobsen, arne.
3d_export
$5
aj floor lamp
...n of a skyscraper giving it an elegant and weightless look. objects: 3 vertices: 20037 edges: 40022 faces: 19990 triangles: 40256
3ddd
$1
Настенный светильник AJ (Visor)
... visor
настенный светильник aj (visor)http://www.cosmorelax.ru/catalog/nastennye/cl608/
design_connected
$9
AJ City Hall Wall Clock
...aj city hall wall clock
designconnected
aj city hall wall clock computer generated 3d model. designed by jacobsen, arne.
3d_export
$60
AJS 7R Cafe Racer 1954 3D Model
...d prix cafe racer harley bobber british mtorcycling competition speed nsu
ajs 7r cafe racer 1954 3d model gonzo_3d 16376 3dexport
turbosquid
$21
AJ Series 7 Armchair 3207
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
AJ Oxford Lounge Armchair 3241
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$13
AJ Rectangular Table 180x80x70 D540
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Gel
archibase_planet
free
Gel
...gel
archibase planet
shaving gel shaving things
shaving gel- 3d model for interior 3d visualization.
archive3d
free
Gel 3D Model
...model
archive3d
shaving gel shaving things
shaving gel- 3d model for interior 3d visualization.
turbosquid
$5
Gel Bottle
...bosquid
royalty free 3d model gel bottle for download as c4d on turbosquid: 3d models for games, architecture, videos. (1414994)
turbosquid
$1
Shower Gel
...bosquid
royalty free 3d model shower gel for download as fbx on turbosquid: 3d models for games, architecture, videos. (1474627)
turbosquid
$19
Gel Gillette
... free 3d model gel gillette for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1557011)
turbosquid
$8
SHOWER GEL
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
gel dispenser
... image, with non-slip caps.<br>you can add the graphic you like and the die you need with your company logo or information.
3d_export
$5
Gel Dispenser 3D Model
...gel dispenser 3d model
3dexport
gel cream dispenser beauty cosmetics virtualz
gel dispenser 3d model virtualz 72573 3dexport
3d_export
$9
Cleansing Gel Bottle
...cleansing gel bottle
3dexport
turbosquid
$5
Blue Gel Bottle
...id
royalty free 3d model blue gel bottle for download as c4d on turbosquid: 3d models for games, architecture, videos. (1415072)
Berlin
3ddd
$1
Кресло Berlin
...кресло berlin
3ddd
кресло berlin, производства - италия.
3d_ocean
$18
Berliner
... obj photorealistic scanned sugar sweet vray
scanned 3d model of berliner with castor sugar on top. placed on white square plate.
3ddd
$1
Berliner Messinglampen
...er messinglampen
подвесной светильник berliner messinglampen
модель - ei02-38op n
размеры плафона: высота 11 см, диаметр 30 см.
3d_export
free
reichsbahn berlin bunker
...based on real building in berlin albrechtstraße 24 (10117) berlin textures: - diffuse map (albedo); - normal map; - specular map;
design_connected
$13
Berlin Chair
...air
designconnected
rietveld by rietveld berlin chair armchairs computer generated 3d model. designed by gerrit thomas rietveld.
design_connected
$11
Berliner Bratpfanne
...nne
designconnected
mawa design berliner bratpfanne floor lights computer generated 3d model. designed by fridtjof schliephacke.
3ddd
$1
Berlin Chair
...xample of timeless aesthetics today. shiny steel carries supple leather. elaborately finished, with pleasantly soft upholstering.
turbosquid
$39
tower berlin
...rbosquid
royalty free 3d model tower berlin for download as on turbosquid: 3d models for games, architecture, videos. (1312818)
3ddd
$1
Berliner by Swedese
...соны: размер 1800х700х680
массив дерева. основание: стальные ноги с хромированной отделкой или лакированной серебристо-серой.
3ddd
free
BoConcept Berlin floor lamp
...boconcept berlin floor lamp
3ddd
berlin , boconcept
boconcept berlin floor lamp
Dry
3d_export
$5
hair-dry
...hair-dry
3dexport
hair-dry wahl 5439-024 super dry professional 2000 watts styling hair dryer- black
design_connected
$16
Dry-Dock
...dry-dock
designconnected
restoration hardware dry-dock computer generated 3d model.
archive3d
free
Dry 3D Model
...el
archive3d
drying unit radiator towel dry
towel dry - 3d model for interior 3d visualization.
turbosquid
$9
Dry Sprey
...urbosquid
royalty free 3d model dry sprey for download as ma on turbosquid: 3d models for games, architecture, videos. (1661017)
turbosquid
$1
Dry Persimmon
...quid
royalty free 3d model dry persimmon for download as max on turbosquid: 3d models for games, architecture, videos. (1449030)
turbosquid
$1
Dry Persimmon
...quid
royalty free 3d model dry persimmon for download as max on turbosquid: 3d models for games, architecture, videos. (1448712)
turbosquid
free
drying rack
...osquid
royalty free 3d model drying rack for download as max on turbosquid: 3d models for games, architecture, videos. (1614082)
turbosquid
$7
Dry plant
...
royalty free 3d model dry plant for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1273449)
turbosquid
$37
pineapple dry
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Dry Reed_001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.