Thingiverse
Sikorsky S-67 Blackhawk for microarmor
by Thingiverse
Last crawled date: 5 years, 10 months ago
S-67 Blackhawk attack helicopter
( it could even carry 8 troopers )
it never made it into production
for 1/285 scale,, just use a clear plastic disc for the rotors.
the main rotor is 66.3mm diameter
the tail rotor is 12.25mm diameter
model in full dimensions in blender 2.80 and exported from blender 2.79b* at 1/100 for the .stl file
scale down to 35% in the slicer.
I've had issues exporting .stl's from 2.80 for Cura; 2.79b and 2.80 export the same mesh to different file sizes, too. So I export the mesh from 2.79b for consistency's sake.
as usual, the d6 is 15mm for reference
( it could even carry 8 troopers )
it never made it into production
for 1/285 scale,, just use a clear plastic disc for the rotors.
the main rotor is 66.3mm diameter
the tail rotor is 12.25mm diameter
model in full dimensions in blender 2.80 and exported from blender 2.79b* at 1/100 for the .stl file
scale down to 35% in the slicer.
I've had issues exporting .stl's from 2.80 for Cura; 2.79b and 2.80 export the same mesh to different file sizes, too. So I export the mesh from 2.79b for consistency's sake.
as usual, the d6 is 15mm for reference