SignalPod alternate mount by wiselynx

Last crawled date: 3 years ago

Alternate mount for the SignalPod bike direction lights, meant to mount the pod on the luggage rack instead of under the seat. The modification is completely reversible should you want to go back to the original mount: the 3d printed piece replaces the framework-like mount on the back of the battery door.
You will need 2 non 3d printed nuts and bolts to fix the pod to the luggage rack. I used M5 steel bolts. You may also need some spacers, I used two ~10mm long pieces of rubber tubing I had lying around, but you may use almost anything solid enough. Depending on the design of your bike's luggage rack, you may need to slightly modify the position and size of the two bigger holes.