Thingiverse
Sienci Longmill Mods
by Thingiverse
Last crawled date: 4 years, 4 months ago
If you want to add endstops to your new LongMill, here are the parts I whipped up.
The Y-axis mounts on the inside of the y-axis gantry mount, using the two bolts that hold the delrin nut. I unscrewed one bolt at a time.
The X-axis mounts on the top left side of the X gantry. I used a small (3.7mm) threaded insert to tension the endstop to the plate. You could remix and reduce the size of that hole and probably get by without an insert.
The laser mount is remixed from Andy and Chris's Onshape catalog, to fit the mounting holes of the laser diode that I built.
The Y-axis mounts on the inside of the y-axis gantry mount, using the two bolts that hold the delrin nut. I unscrewed one bolt at a time.
The X-axis mounts on the top left side of the X gantry. I used a small (3.7mm) threaded insert to tension the endstop to the plate. You could remix and reduce the size of that hole and probably get by without an insert.
The laser mount is remixed from Andy and Chris's Onshape catalog, to fit the mounting holes of the laser diode that I built.
Similar models
thingiverse
free
Optical X Endstop for Hypercube by PETFlasche
...m3x16 for mounting ...
for the y axis https://www.thingiverse.com/thing:2783464
my endstops in actionhttps://youtu.be/4o7cbcq95_y
thingiverse
free
Cupcake Gen 4 Endstop Mounts by makedave
...hat did not require me to drill holes in my cupcake. these are the -x and -y mounts for the original x and y axis. (not lowrider)
thingiverse
free
X1 Filament Relocator for X-Axis Belt Tensioner by thebeline
...t twisted filament from getting between the gantry and sensor, which is bad).
use the rg gantry support
profit!
no supports. g2g
thingiverse
free
Shapeoko V2 Y axis homing and limit switch mounts by fjohn624
... it hides inside the x axis rails. the stops are adjustable and are sized for m5 bolts. simply tap them so they can have threads.
thingiverse
free
Adjustable optical Z endstop for the Ender 3 by savanna201
... need to use a blade to thinning the notch of the optical endstop, otherwise the x gantry won't fit it the notch when homing.
thingiverse
free
Ender 5 X-axis Endstop Switch Mounting Block by eschmidt12
...ck to the x-axis gantry, which i needed when i decided i wanted to utilize a t-nut to make the enstop position adjustable. enjoy!
thingiverse
free
X endstop mount for Ender - 4 for stock carriage plate by Kookaburra88
...the endstop, but if you attach a stud on the downward facing side of the x-axis, you can use this as a moveable triggering point.
thingiverse
free
CR-10 y-axis endstop mount by TJH5
...thingiverse
this is an improved mount for the y-axis endstop of the cr-10.
to mount the switch you may have to use other screws.
thingiverse
free
Y-Axis Endstop Mount Front Side for CTC, Flashforge and similar by zumili
...d on the front side for the y-axis.
you need 2 m3 30mm screws and 2 m3 nuts. and you have to drill 2 holes inside the left plate.
thingiverse
free
Hypercube mounts for X and Y proximity endstops by mattjoyce
...y proximity endstops by mattjoyce
thingiverse
i had some spare proximity sensors, and thought i would use them as axis endstops.
Longmill
thingiverse
free
CNC Router Table Design (LongMill 30x30)
...ou can read about my build and the specific bill of materials here:
https://www.thissmarthouse.net/sienci-longmill-our-first-cnc/
thingiverse
free
Sienci LongMill Controller Box Mounting Feet
...e it to be mounted to a flat surface. i used it to mount my cnc's controller box to the side of the table and out of the way.
thingiverse
free
LongMill Dust Collection Hose Boom
... 2" version fits this hose: https://www.amazon.com/gp/product/b00fx34qeu/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
CNC Router Switch Box With E-Stop (LongMill)
...cnc router switch box with e-stop (longmill)
thingiverse
simple box for switches. different lids included.
thingiverse
free
Longmill CNC Power Supply Mounting Bracket by DustinTheMaker
...er indicator, but the brackets are otherwise identical and will fit on both sides of the power supply.
does not require supports!
thingiverse
free
LongMill Mounting Bracket Sleeve for Ridgid (R24012) by GarageBot
...5mm inside sleeve dia while keeping the outer dia constant at the 80mm constraint as required by their supplied mounting bracket.
thingiverse
free
Modified Adapter-Longmill Dust Boot v1 by falviani
...ll to put in the pilot holes. while there's a tab in the back, that may not be useful; i only fastened down the front 2 tabs.
thingiverse
free
Line Laser Diode Holder for Sienci Long Mill CNC router
...are modified for use on the newer sienci cnc longmill these holders mount on the side of the 2020...
thingiverse
free
Shopvac adapter for Sienci Labs' CNC dust boot by jdaveiga
...i created that i'm using with the sienci labs longmill cnc brand new dust boot (the one just released...
Sienci
thingiverse
free
Sienci Mill One - M8 Nut Holder by napster55
...sienci mill one - m8 nut holder by napster55
thingiverse
sienci mill one - m8 nut holder
thingiverse
free
Sienci Mill One Tool Holder by Elproducts
...to hold the tools for my mill one.
i used tinkercad to modify it and all the details are in my video:https://youtu.be/artams1rlto
thingiverse
free
Sienci CNC Long Mill touchplate magnet cover
...or the sienci cnc long mill touchplate. the original design kep falling off and the connection to the magnet would become loose.
thingiverse
free
Sienci LongMill Controller Box Mounting Feet
...e it to be mounted to a flat surface. i used it to mount my cnc's controller box to the side of the table and out of the way.
thingiverse
free
Line Laser Diode Holder for Sienci Long Mill CNC router
...hing posted by tigerstar4 can be found here:
https://www.instructables.com/id/add-a-laser-guide-to-your-sienci-mill-one-cnc-rout/
thingiverse
free
Sienci Mill - Angle Mount - 4 holes by M1kka
...): https://www.thingiverse.com/thing:2284303
i've added two more holes for additional strength and resistance against torque.
thingiverse
free
Line Laser Diode Holder for Sienci Mill One CNC Router by TigerStar4
...on each side.
instructable on how to install:https://www.instructables.com/id/add-a-laser-guide-to-your-sienci-mill-one-cnc-rout/
thingiverse
free
Sienci Mill One - Z Axis limit switch bracket and stop block by TigerStar4
... with details on how to wire and mount the switcheshttps://www.instructables.com/id/add-homing-switches-to-a-sienci-mill-one-cnc/
thingiverse
free
Sienci CNC Long Mill Limit/Homing Switches
...cket that protrudes beyond the laser diode. if you don't have the laser guides then you need the shallower no laser bracket.
thingiverse
free
Sienci Power Brick Holder by mikelduke
...rtoken=rwb.rdnyi4iwgfezbqlwgw&slotnum=0&ie=utf8&psc=1&tag=tv-auto-20
https://www.tinkercad.com/things/hmuoyzlwebw
Mods
design_connected
$13
MOD. 4233 - MOD. 4234 Table Lamp
...mod. 4233 - mod. 4234 table lamp
designconnected
arcahorn mod. 4233 - mod. 4234 table lamp computer generated 3d model.
design_connected
$11
MOD.1095
...mod.1095
designconnected
mod.1095 computer generated 3d model. designed by sarfatti, gino.
3ddd
$1
fireplaces mod Spec
...fireplaces mod spec
3ddd
камин
fireplaces mod spec 180x90x125h
3ddd
free
Flos Mod. 2129
... mod
фабрика: flos
модель: mod. 2129
описание: подвесной светильник, металл, белый, черный.
сайт: www.flos.com
turbosquid
$34
Mod Lamp.c4d
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$32
MOD A 001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Maars Mod
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Mod 70..
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
MOD Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Mod-Lite
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.