Thingiverse
Shortened 3DVerkstan North American Face Shield by blackfalconky
by Thingiverse
Last crawled date: 4 years, 6 months ago
This is a shortened 3DVerkstan American 3-hole punch protective visor face shield for use with printers with 7-inch print beds such as the Prusa Mini. The arms are shortened just a few millimeters; there is no change to the spacing for the face shield holes.
There are six versions:
Open Face Frame
Open Face Frame with “PLA” label
Open Face Frame with “PETG” label
Solid Face Frame
Solid Face Frame with “PLA” label
Solid Face Frame with “PETG” label
The “PLA” and “PETG” labels can be useful for medical facilities to know what kinds of cleaning methods and chemicals can be used on a given piece.
Based on the faceshield.nu project by Erik Cederberg / 3DVerkstan.
Edits:
08/09/2020 - Re-uploaded .STL files due to frames printing just slightly too thick. Issue resolved.
There are six versions:
Open Face Frame
Open Face Frame with “PLA” label
Open Face Frame with “PETG” label
Solid Face Frame
Solid Face Frame with “PLA” label
Solid Face Frame with “PETG” label
The “PLA” and “PETG” labels can be useful for medical facilities to know what kinds of cleaning methods and chemicals can be used on a given piece.
Based on the faceshield.nu project by Erik Cederberg / 3DVerkstan.
Edits:
08/09/2020 - Re-uploaded .STL files due to frames printing just slightly too thick. Issue resolved.