Thingiverse
SHORKWERVE BLYADE for the FGC-9 MKI or MKII by ItsProtonBob
by Thingiverse
Last crawled date: 4 years, 7 months ago
I modeled this badass SHORK for the FGC-9 for those of us in the US to keep it legal. I modeled this after being inspired by a popular stabilizing brace that's similar. Please excuse the sloppy order of operations for the Fusion 360 model - it was piggybacked onto a previous model for a std. buffer tube size.The Inner Diameter of the tube is 36.2mm as modeled so it should fit over the fgc-9 buffer tube. You may need to slightly scale up, or just modify the model to adjust your clearance depending on your printer accuracy. Print in orientation shown in cura picture, PLA+ recommend. Print with supports and use a brim. I recommend 100% infill.
The only catch for those of us in the US is that I modeled the set screw hole for a M6 threaded fastener, so you may have to change that if you are using a 5/16-18 bolt.
NOTE: This is designed to fit the FGC-9 buffer tube, which is larger than a standard one and as such wont fit store bought buffer tubes.
The only catch for those of us in the US is that I modeled the set screw hole for a M6 threaded fastener, so you may have to change that if you are using a 5/16-18 bolt.
NOTE: This is designed to fit the FGC-9 buffer tube, which is larger than a standard one and as such wont fit store bought buffer tubes.