Thingiverse
Shitty Robot Holiday Card Display by Dillon1337
by Thingiverse
Last crawled date: 4 years, 4 months ago
This project is a display stand for a holiday card drawn by a KUKA robot arm (with the help of Simone Giertz). It was a reward for supporting her on Patreon over the holidays. It displays a piece of paper and has room behind the paper for electronics. I'm using the space for backlighting the paper with RGB LEDs.
Consider this a rough draft. It worked for me with some modifications. The USB port hole in the back wasn't large enough so I had to widen it. It printed too short so I had to cut a sliver off the paper. The width is specific for my length of paper. It was able to print without support though. All files are available so you can modify it yourself to fit your dimensions.
More details on this project located on my blog at mylifeasa.tinkerer.us
Files designed in Autodesk Fusion 360. There are .stl files for printing, .f3d files for modifying in Fusion, and .stp files for modeling in other CAD programs.
Consider this a rough draft. It worked for me with some modifications. The USB port hole in the back wasn't large enough so I had to widen it. It printed too short so I had to cut a sliver off the paper. The width is specific for my length of paper. It was able to print without support though. All files are available so you can modify it yourself to fit your dimensions.
More details on this project located on my blog at mylifeasa.tinkerer.us
Files designed in Autodesk Fusion 360. There are .stl files for printing, .f3d files for modifying in Fusion, and .stp files for modeling in other CAD programs.