Thingiverse
Shift, part connect grinding pad to electric motor by gedcet
by Thingiverse
Last crawled date: 4 years, 6 months ago
Three printed parts connect grinding pad M14 thread with electro motor shaft - diameter 6 mm, length from device 20 mm.
Grinding pad external diameter 125 mm, thread depth 19 mm
My motor power 60 w, 220 v it's enough power for this works.
Printed thread part is divided in two part, for better strength of the detail
Additionally you need:
2 - bolts M6
2 - nuts M6
1 - grinding pad diameter 125 mm with M14 thread
1 - electro motor
"m14 left.stl" and "m14 right.stl" print with 100 % fill
"nakladke.stl" i print with 5 % fill and it's enouth
Grinding pad external diameter 125 mm, thread depth 19 mm
My motor power 60 w, 220 v it's enough power for this works.
Printed thread part is divided in two part, for better strength of the detail
Additionally you need:
2 - bolts M6
2 - nuts M6
1 - grinding pad diameter 125 mm with M14 thread
1 - electro motor
"m14 left.stl" and "m14 right.stl" print with 100 % fill
"nakladke.stl" i print with 5 % fill and it's enouth