Shendrones Corgi XT60 Backmount FLEX by SirQuentin

Last crawled date: 3 years ago

This is a XT60 mount for the Shendrones Corgi.
Good to know:
It is designed to be printed in Flex!
The plug may already be soldered!
It needs to be printed in Flex Material to fit inside otherwise it won't because the mold is smaller then the plug.
You can use the top side of the flex as a anti-slip mat
How to mount it to the Frame:

Just pull your XT60 inside the Flex mount from behind.


There is a 1mm edge on the frontside of the mount to hold the plug in position while connecting or disconnecting a lipo

Now just slide the mount over the bottom plate of the battery tray. Because it is flex it should fit and sit tight!