Thingiverse
Shapeoko 3 Enclosure 25mm/1" Aluminum Extrusions with Drag Chain by jup2000
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is my enclosure for my new Shapeoko 3 desktop CNC. I'm sure it can be adapted for any CNC/3D Printer utilizing 25mm / 1" aluminum extrusions.
25mm/1" aluminum extrusions work perfectly with 1/4" plexiglass/lexan sheets, as it slides in perfectly between the middle lining/ridge, which is why I chose it instead of the more popular 8020/20mm extrusions. The 1/4" plexiglass was thought to be better for protection against possible flying debris (ie broken bits).
I printed all the corners/brackets instead of buying the metal ones because I was cheap - and I needed to put my two 3D printers to use. Plus it was fun to design!
Anyway, nearly everything is tapped for M5 screws. I used #6 screws for the door hinges, because I had a bunch laying around.
The back vacuum hose adapter is 52mm I believe, which fits my shopvac.
As for the drag chain, I chose the 15x30mm ones I found on Amazon for $13ish. These are the ones that is semi-opened so you can fit all the cables, and without snaking.
25mm/1" aluminum extrusions work perfectly with 1/4" plexiglass/lexan sheets, as it slides in perfectly between the middle lining/ridge, which is why I chose it instead of the more popular 8020/20mm extrusions. The 1/4" plexiglass was thought to be better for protection against possible flying debris (ie broken bits).
I printed all the corners/brackets instead of buying the metal ones because I was cheap - and I needed to put my two 3D printers to use. Plus it was fun to design!
Anyway, nearly everything is tapped for M5 screws. I used #6 screws for the door hinges, because I had a bunch laying around.
The back vacuum hose adapter is 52mm I believe, which fits my shopvac.
As for the drag chain, I chose the 15x30mm ones I found on Amazon for $13ish. These are the ones that is semi-opened so you can fit all the cables, and without snaking.
Similar models
thingiverse
free
1/4" Plexiglass Clip for Monoprice Dual Extrusion 3d printer by Darkcheops
...3d printer. i assume it would also fit on similar flashforge creator pro clones but i have only tested...
thingiverse
free
Binocular Tripod Adapter
... the quick release plate 43x43.
no support needed.
a unc 1/4"x38mm screw is needed to screw the adapter into the binoculars.
thingiverse
free
3/8" to 1/4" Screw Adapter thread by DROUGA
...nz4
this thing is just the thread that the adapter screw fits perfectly into.
printed in normal black pla on a anet a8 at 240° c
thingiverse
free
Printer Enclosure parts by michaelfordltd2
...parts by michaelfordltd2
thingiverse
this are the parts i used to create a 1/8" thick plexiglass enclosure for my ender3 v2
thingiverse
free
Stepcraft Drag Knife Adapter for Shapeoko X-Carve - 3 Sizes by ackme
...zes by ackme
thingiverse
stepcraft drag knife adapter for shapeoko x-carve - 3 sizes.
'longer' works best on my shapeoko
thingiverse
free
3DUpfitters Prusa Enclosure Riser
...it also helped with the issue of the acrylic walls liking to bend too much around the printer, becoming wavy instead of straight.
thingiverse
free
3 inch CNC box by BurkeLaShell
...3 inch cnc box by burkelashell
thingiverse
3d box made from 1/4" mdf on my shapeoko cnc
thingiverse
free
Drag Chain Catcher
...ing them together, and 12-15mm for mounting to my cnc)
t-nuts
5mm i.d. washers
2020-01-11 added g-code sliced on the prusa slicer
thingiverse
free
Parametric Extrusion Clip for 80/20 Extrusion by mredmon
...usion i have is the 1530 series (1.5" x 3") but the files are parametric so they should be adaptable to other profiles.
thingiverse
free
CNC CABINET WIRE OUTLET GROMMET FOR 1/2" by camaroboy383
... this version is for 1/2" thick enclosures while the other in my uploaded things is for 3/4" thick enclosures... enjoy!
Jup2000
thingiverse
free
Bell Siphon Endcaps by jup2000
...e bell siphon.
pictured is the original version. v2 has thicker limbs and is more of a snug fit to prevent sliding and breaking.
thingiverse
free
Filastruder Fan / Filament Blower by jup2000
...: made the base columns taller to increased air intake. made the top hood shorter to accommodate the change in the base height.
thingiverse
free
Filastruder Hopper Neck Extender (2L bottle -> 1" PVC coupler) by jup2000
...pter to extend the opening.
there is are two pieces: a male and female coupler that attaches to either end of a 1" pvc pipe.
thingiverse
free
1in and 3/4in PVC Pipe Grilled Endcaps by jup2000
... rolled my own.
these grilled endcaps fit standard 1" and 3/4" pvc pipes. so now the fish are happy and i'm happy.
thingiverse
free
Rostock Max Flyingstruder Mount for E3D's Titan Extruder by jup2000
...de. bungee cords can be used in place of the bands. if there is enough request, i guess i can reimagine the arm plates as well.
thingiverse
free
COVID-19 Coronavirus Reusable Mask by jup2000
...r petg as its stronger. everything can be printed without support. i'm use a 6mm nozzle at 0.25mm layers for faster prints.
thingiverse
free
Shapeoko 3 Dust Shoe with LED ring by jup2000
...d screw. i forgot which i use, but i had a bunch laying around.
the led ring itself is just zippy tied to the adaptor (see pic).
thingiverse
free
Rostock Max V2 Microswitch z-probe magnetic mount by jup2000
...
you will also need 6x 3/16" cube n48 magnets. i got mine on the cheap from amazon, but i've seen them on ebay as well.
thingiverse
free
Creality Ender 5 PLUS / 3 / CR10 Plus / Ender 3 BLV BMG Direct Drive BL Touch by jup2000
...nd cr10 series as well as they all have similar hotends.
spaces included for adjusting the bl touch. bl touch offset is 30.75mm.
Shapeoko
thingiverse
free
Shapeoko Bitsetter
...shapeoko bitsetter
thingiverse
a bitsetter to be used with a shapeoko touch probe.
thingiverse
free
Feet for ShapeOko by SeaShadow
...feet for shapeoko by seashadow
thingiverse
an .stl and 123d design file for some feet for the shapeoko cnc router.
thingiverse
free
Shapeoko Idler by thatch
...dler by thatch
thingiverse
an idler pulley that goes on ball bearings, roughly compatible with the ones that come with shapeoko.
thingiverse
free
Shapeoko Pen Mount by cfaulkingham
...shapeoko pen mount by cfaulkingham
thingiverse
shapeoko pen mount.
thingiverse
free
ShapeOko rubberband Penholder by nischi
...shapeoko rubberband penholder by nischi
thingiverse
shapeoko rubberband penholder
thingiverse
free
ShapeOko Penholder Collection by nischi
...iverse
shapeoko penholders for different pensizes
penholder for shapeoko open source cnc milling machine
http://www.shapeoko.com
thingiverse
free
ShapeOko Main Toolholder by nischi
...by nischi
thingiverse
shapeoko main toolholder
can be directly connected to the case
for all the tools you get with you shapeoko
thingiverse
free
Shapeoko NEMA17 Mount by jossgray
...shapeoko nema17 mount by jossgray
thingiverse
nema 17 mount for shapeoko cnc
thingiverse
free
Shapeoko Clamp by JeffKubascik
...peoko clamp by jeffkubascik
thingiverse
a simple clamp assembly to hold down parts for your shapeoko. use with 1/4" bolts.
thingiverse
free
Shapeoko HDZ Suckit Ears
...shapeoko hdz suckit ears
thingiverse
suckit dust boot ears for shapeoko with hdz.
Drag
thingiverse
free
Drag Chain
...drag chain
thingiverse
a drag chain.
thingiverse
free
drag benchy
...drag benchy
thingiverse
the 3dbenchy drag is here.
thingiverse
free
Drag stand
...drag stand
thingiverse
stand for voopoo drag vape
thingiverse
free
Drag Chain Ends
...drag chain ends
thingiverse
drag chain ends.
thingiverse
free
Low Drag by margarido
...low drag by margarido
thingiverse
low drag cover
thingiverse
free
Drag Skid by Drifttoy
...kid by drifttoy
thingiverse
drag skid for scratch built planes. sample pictures show it installed on a flitetest 3d model plane.
thingiverse
free
Drag Chain by chriswal
...hriswal
thingiverse
customizable drag chain
the stl files are only examples
you can create your own in customizer or in openscad
thingiverse
free
Snowflake by Drags
...snowflake by drags
thingiverse
simple snowflake that i printed as one of my test prints.
thingiverse
free
Drag Roller by chriswal
...this is a drag roller designed for the holder from farflyer(mpcnc).
you need one 608 bearing and 2x m4 screws.
the offset is 4mm.
thingiverse
free
Drag cartridges stand / support cartouches Drag by LowD
...ort pour cartouche drag, 10 cartouches + 2 drip tips 510 et 2 drip tips 810
3 heures de prints environs pas de post traitement ;)
25Mm
thingiverse
free
25mm to 25mm Hose Connector by Chalmers888
...lmers888
thingiverse
simple design for a 25mm to 25mm hose connection in which i then secured both hoses on with a jubilee clip.
thingiverse
free
clamp 25mm
...clamp 25mm
thingiverse
clamp 25mm
thingiverse
free
25mm Base
...25mm base
thingiverse
a flat 25mm base with slightly curved edges.
thingiverse
free
25mm jap
...25mm jap
thingiverse
commission
thingiverse
free
25mm blanking plug
...25mm blanking plug
thingiverse
plug to blank off 25mm holes
thingiverse
free
25mm Industrial Base
...25mm industrial base
thingiverse
small custom base for a 25mm figure!
thingiverse
free
25mm x 25mm x 20mm Calibration Cube by 3DerJaeger
...x 25mm x 20mm calibration cube by 3derjaeger
thingiverse
calibration cube
outside : 25mm x 25mm x20mm
inside: 20mm x 20mm x 17mm
thingiverse
free
25mm Objective Base
...25mm objective base
thingiverse
25mm objective base, few bullets and symbol.
thingiverse
free
25mm Bracket by Indignity_Jones
...25mm bracket by indignity_jones
thingiverse
a simple 3 hole 25mm x 50mm bracket, can be used for many things.
thingiverse
free
Bosch Cap 25mm x 25mm or 1" x 1" by Platridi
... cap 25mm x 25mm or 1" x 1" by platridi
thingiverse
este es la tapa para un perfil tipo bosch con ancho de 25mm x 25mm
Aluminum
thingiverse
free
Aluminum Placemat by citrabenda
...citrabenda
thingiverse
aluminum placemat
aluminum pipe 10mm, https://amzn.to/3acbapk
aluminum pipe 12mm, https://amzn.to/3bgr8pp
thingiverse
free
Printrbot Aluminum by Chris_the_Carpenter
...printrbot aluminum by chris_the_carpenter
thingiverse
a redesign of the awesome printrbot, in aluminum.
thingiverse
free
Aluminum Ingot
...ngiverse
designed and printed this to ram in green sand so that i could have uniform ingots when melting and pouring my aluminum
thingiverse
free
Aluminum ingot
...and printed this as a mold to ram up in green sand or petrobond so that i had uniform ingots when melting and pouring my aluminum
thingiverse
free
Aluminum 30 by ThisIsNoise16
...isnoise16
thingiverse
aluminum 30 body.
use pla and 1" x 1/16th" aluminum bars.
supports shouldn't be necessary.
thingiverse
free
fastening of aluminum pipe by Bortsov
...fastening of aluminum pipe by bortsov
thingiverse
fastening of aluminum pipe
thingiverse
free
Openbuilds aluminum profiles by Artu66
...openbuilds aluminum profiles by artu66
thingiverse
aluminum profiles openbuilds
thingiverse
free
Aluminum Dolley Repair by Thomasheisler
...aluminum dolley repair by thomasheisler
thingiverse
repair part for aluminum dolley
thingiverse
free
Aluminum Profile 20x20LR by atancito
...aluminum profile 20x20lr by atancito
thingiverse
a simple aluminum profile 20x20lr
thingiverse
free
Aluminum Profile 40x40 by atancito
...aluminum profile 40x40 by atancito
thingiverse
a simple aluminum profile 40x40x200mm
Chain
thingiverse
free
chain
...chain
thingiverse
chain #massimino_martello #catena
thingiverse
free
Chain lub for 520 chain by Greekmaker98
...chain lub for 520 chain by greekmaker98
thingiverse
for 520 chain only
thingiverse
free
Chain by Galione1
...chain by galione1
thingiverse
chain, bike style chain. easy to print.
thingiverse
free
chains by Syzguru11
...chains by syzguru11
thingiverse
chains
thingiverse
free
Chain bracelet
... chain bracelet. no support needed. the chain is printed as a whole.
larger chain might need to be scaled down to fit most hands.
thingiverse
free
Chain of Perdition
...chain of perdition
thingiverse
designed to represent a chain of force summoned by casting chain of perdition in pathfinder.
thingiverse
free
Drag Chain
...drag chain
thingiverse
a drag chain.
thingiverse
free
Chain by raken
...chain by raken
thingiverse
chain bracelet
thingiverse
free
Chain
...chain
thingiverse
for gaming and modeling
thingiverse
free
Chain by dshur
...chain by dshur
thingiverse
. chain modeling data
Enclosure
thingiverse
free
Enclosure by KlimukVI
...enclosure by klimukvi
thingiverse
enclosure
thingiverse
free
Enclosure by silverfox
...enclosure by silverfox
thingiverse
trial enclosure
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
printed in hydra
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
printed in hydra
thingiverse
free
Enclosure Handle
...enclosure handle
thingiverse
handle for the plexiglass enclosure door for my cr-10.
thingiverse
free
Switch enclosure
...switch enclosure
thingiverse
switch enclosure as used in this youtube video
space in base for d1 mini
thingiverse
free
majikatek enclosure by ellenlangsetmo
...ure electronics enclosure for my electronics prodject the size of the enclosure is 22 x 14 inches by 2 and three quarture inches.
Extrusions
thingiverse
free
Extrusion Endcap
...extrusion endcap thingiverse extrusion endcap sized for misumi extrusions ...
thingiverse
free
Eyeball (Dual Extrusion and Single Extrusion) by Pollak3DPrintingPros
...n be dual extrusion, multi extrusion, and single extrusion.
designed with meshmixer. eyeball.stl is the single extrusion version.
thingiverse
free
Vega Extrusion-Servo-Extrusion by Cjeshiva
...vega extrusion-servo-extrusion by cjeshiva
thingiverse
zoop
thingiverse
free
signback extrusion
...signback extrusion
thingiverse
model of aluminium signback extrusion.
thingiverse
free
Easter eggs simply extrusion and dual extrusion by Uwe94
...by uwe94
thingiverse
easter eggs simply extrusion and dual extrusion.
the files with dual extruder end in xxxxx_dua; xxxxx_dub
thingiverse
free
1560 extrusion 150mm
...1560 extrusion 150mm
thingiverse
1560 extrusion 150mm
thingiverse
free
Octahedral extrusion by nevitdilmen
...octahedral extrusion by nevitdilmen thingiverse extrusions from...
thingiverse
free
Extrusion bracket by theedee
...extrusion bracket by theedee
thingiverse
3-way bracket for 'u' shaped extrusion
thingiverse
free
1515 Extrusion by cudatox
...1515 extrusion by cudatox
thingiverse
something resembling 1515 extrusion. most parameters are customizable, including length.
thingiverse
free
Dovetail Extrusion 50x50x50 by shags
...dovetail extrusion 50x50x50 by shags
thingiverse
dovetail extrusion 50x50x50
3
thingiverse
free
Raspberry 3 and 3+ case
...raspberry 3 and 3+ case
thingiverse
case for raspberry 3 and 3+ wit fan
thingiverse
free
Cube Dissection Puzzle/ Model for 3^3 + 4^3 +5^3 = 6^3 by lgbu
...: oxford university press. (p. 203). the authors gave credit to a solution in eureka, the magazine of the cambridge archimedeans.
thingiverse
free
Makeblock Aluminum Pieces 3*3/3*9
...makeblock aluminum pieces 3*3/3*9
thingiverse
makeblock pieces 3x3 and 3x9 recreated for 3d printing
thingiverse
free
Floss 3 Lite - lollipop 3
...floss 3 lite - lollipop 3
thingiverse
antenna mount for floss 3 lite.
thingiverse
free
3 by obstacledaddy
...3 by obstacledaddy
thingiverse
3
thingiverse
free
????????? ??? ??????? 3 ?? by Rigel
...????????? ??? ??????? 3 ?? by rigel
thingiverse
????????? ??? ??????? 3 ??
thingiverse
free
oloid 3
...oloid 3
thingiverse
oloid 3
thingiverse
free
A stand 3
...a stand 3
thingiverse
a stand 3.
thingiverse
free
Tischlampe #3
...tischlampe #3
thingiverse
tischlampe #3
thingiverse
free
3/8 to 3/4 grommet by quikniq
...3/8 to 3/4 grommet by quikniq
thingiverse
3/8" to 3/4" grommet.
1
thingiverse
free
Magic Token +1/+1 & -1/-1 by Kilgara2B
...magic token +1/+1 & -1/-1 by kilgara2b
thingiverse
a magic the gathering token +1/+1 and -1/-1
thingiverse
free
MTG +1/+1 and -1/-1 counters by 4PStudiosGaming
...tudiosgaming
thingiverse
if you are in need of the 4pstudiosgaming +1/+1 and -1/-1 counters, then you came to the right page :-p
thingiverse
free
Fraction circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 by tfloveless
... 1/6, 1/8, 1/10, and 1/12 sized wedges as well as a circular base for them to fit onto. there are no labels on any of the pieces.
thingiverse
free
Adapter Syphon - 1 1/4" to 1 1/2" by _Stefano17_
...dapter for syphon - 1 1/4" to 1 1/2" h10,5mm
the project was realized with tolerances for printing with abs + tape ptf.
thingiverse
free
1 1/8" and or 1 1/5" headset press
...l fit both 1 1/8" and 1 1/5" bearing cups. i used a 3/8ths" threaded rod with nuts and thick washers on each end.
thingiverse
free
1-1/4" to 1-1/2" pipe cheeseborough clamp by aonomus
...design cheeseborough clamp for hanging lightfixtures and other items onto 1-1/4"-1-1/2" npt pipe. use at your own risk.
thingiverse
free
Shopping cart tokens 1€ 1$ 1£ by I_am_me
...them instead of money coin in your supermarket cart or in your swimming pool locker.
edit : updated 1£ coin with new dimensions
thingiverse
free
pipe thread adapter 1" to 1" 1/4 by Printerforever
...d adapter 1" to 1" 1/4 by printerforever
thingiverse
this is an adapter 1" to 1" 1/4 (male to male)
enjoy !
thingiverse
free
Playstation 2, 1:1 by Vitting
...playstation 2, 1:1 by vitting
thingiverse
made a 1:1 playstation 2.
thingiverse
free
Nesting Fraction Circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 V.2 by tfloveless
...re thinner and actually fit within each other to show equivalent fractions. also, check out the same version with braille (here).