Shaft Collar by euroNYmadSci

...shaft collar by n314 thingiverse shaft collar for a ~.25in rod

...wade 8a feed shaft collar by darrenmc thingiverse wade 8a feed shaft collar

...by timschmidt thingiverse this is a parametric shaft collar (http://en.wikipedia.org/wiki/shaft_collar) designed using openscad.

... can be very strong. 8 parameters so you can make any size .stl file is for a collar on a 3/8" shaft using a 1/4" bolt.

...parametric shaft collar by gammagec thingiverse uses a nut and bolt to lock onto a shaft

...shaft collar 1 by aarondg076 thingiverse 1

...the collar as two pieces. useful for fastening around a shaft where you cannot access the ends. option for a hex shaped shaft.

...p it wobbling around in the hole in the centre of our glass patio table. the flange is 60mm dia and the shaft is 49mm od, 31mm id

...ment/sliding along the length. the two halves are identical. provided stl is for 8mm shaft, with m3 screws and nuts to attach it.

...intended to stand in for the 1/4 inch vex shaft collar. this does not have a set screw, so it's simply snug to stay in place.

...shirt collar stay / collar tab thingiverse another collar stay, a little extra thickness and a nice angle that is to the point.

...collar by dcgstudent thingiverse a collar for the pinball machine

...drill collar by moreken thingiverse diameter drill collar 35mm external diameter of the collar 60mm

...horse-collar by millbo thingiverse horse-collar

...collar stays by aronvln thingiverse collar stays

...loremipsum collar by arqmartintrejo thingiverse loremipsum collar

...posture collar by atum1 thingiverse collar for posture play.

...wobbler collar by studiobutcher thingiverse collar for furniture range

...collar boanz by pontifex thingiverse collar stays - with style.....

...loremipsum collar by arqmartintrejo thingiverse loremipsum collar repaired

...shaft thingiverse a servo shaft for my catfeeder

...shaft by kokodyn thingiverse shaft

...shaft clamp thingiverse shaft clamp, can be resized in cad to suit any shaft

...drive shaft by redmerlin thingiverse a drive shaft.

...r shafts in dia ø8mm to 12mm to be used for example in 3d printer and cnc constructions. easy print, either with supports or not.

...pto shaft by dokola thingiverse education model of propeller shaft

...shaft collar by n314 thingiverse shaft collar for a ~.25in rod

...4mm shaft thingiverse generic volume knob for 4mm semi circle shaft. note! the diameter of the round shaft should be around 4mm.

...square shaft by danielradu thingiverse a small shaft i needed for a project