Thingiverse
Servowire placeholder by Tripel
by Thingiverse
Last crawled date: 4 years, 7 months ago
Sometimes it is hard to keep servowires out of the way. Especially in E-powered gliders where you want to fit it all in a narrow fuselage.
Drill a 1.5mm diam hole, add a drop of glue and the guide is fixed in place. Place the wire in and secure in place with a small rubber band (I cut mine out of silicone fuel hose, thin rings out of 4x2 or 3x2 hose).
A bit fiddely, as the parts are small (only a few mm's), but the inside of your RC-model looks so much neater.
I have made a version without the pin also, to be glued in place. For use on the inside of the fuselage skin for instance.
Drill a 1.5mm diam hole, add a drop of glue and the guide is fixed in place. Place the wire in and secure in place with a small rubber band (I cut mine out of silicone fuel hose, thin rings out of 4x2 or 3x2 hose).
A bit fiddely, as the parts are small (only a few mm's), but the inside of your RC-model looks so much neater.
I have made a version without the pin also, to be glued in place. For use on the inside of the fuselage skin for instance.