Thingiverse
Serving jig Bowstring by vuXaidu8
by Thingiverse
Last crawled date: 3 years, 2 months ago
Layer height 0.3 if you want it fast. 0.2mm otherwise.
I recommend infill 100%.
No supports needed
You will need:
M6x70mm and nut (or 80mm M6 threaded rod with nut and nylon nut)
L59mmxD4.2mm rods. 3 pieces. Just edit the freecad file if you need another diameter.
Glue, to glue the rods permanently.
Tools:
Drill bit of around 1mm to drill the hole of the thread.
Notes:
Print with recommended settings.
Glue the squared 'bodyCover' after puting the 3 rods
You can also glue the nut to the turning wheel if you want.
This will fit a spool with a diameter hole of 10mm and length of 49mm
I recommend infill 100%.
No supports needed
You will need:
M6x70mm and nut (or 80mm M6 threaded rod with nut and nylon nut)
L59mmxD4.2mm rods. 3 pieces. Just edit the freecad file if you need another diameter.
Glue, to glue the rods permanently.
Tools:
Drill bit of around 1mm to drill the hole of the thread.
Notes:
Print with recommended settings.
Glue the squared 'bodyCover' after puting the 3 rods
You can also glue the nut to the turning wheel if you want.
This will fit a spool with a diameter hole of 10mm and length of 49mm
Similar models
thingiverse
free
Spool Filament Winder
... filament winder for drill. uses 3/8 threaded rod and nuts. may need to glue nuts in place depending on your printers tolerances.
thingiverse
free
Drill/Can Blender by j8arone
... you will also need machine screws and nuts to attach the clips. use acetone or gorilla glue to attach the clips to the cylinder.
thingiverse
free
Nut block for 8mm threaded rod
...ore than 8mm long.
the threaded insert version uses three m365 threaded inserts. they are 6mm long with an outer diameter of 5mm.
thingiverse
free
Mini Drill press for PCB by Newtonn2
...to cut the rods).
-screw drivers or allen keys. (depending on the head of the bolts you have).
get in touch if you need any help.
thingiverse
free
VolanteX Ranger 1600 detachable tail mod by federikk
...elage (3mm hole).
you'll need to measure and cut an m3 threaded rod and then solder two hand bolts in order to make the pins.
thingiverse
free
M6 Knurled Nut (Rändelmutter) by crazydino
...
printing:
for max stability, print with 100% infill.
note:
you should put glue into the hole before inserting your threaded rod.
thingiverse
free
Ball Rod End by piodoi
...hread just push or glue)
it has a domed end in the rod hole so no support should be needed.
rod hole is half the sphere diameter.
thingiverse
free
Bottle Lock funny gift whisky contraption by Frogkiller
...d recomment to use epoxy glue. there is deep groove for nut, but if you want to be 100% cheater proof small drop cannot hurt you.
thingiverse
free
Cabinet and drawer handle by LowLevelM
...he rod through
4) glue both sides of the handle to the rod and let dry
that's it! no need for a trip to the store for screws!
thingiverse
free
Parametric universal spool adapter by Oravaattori
...ith threaded rod and two nuts. included stl fits m8 rod and nuts, and spools with a hole diameter of 4-8cm. no need for supports.
Vuxaidu8
thingiverse
free
Peep roration by vuXaidu8
...ed to allow to change the profile, or size of the holes.
you can pass a thread trough the holes to make sure it doesn't fall.
thingiverse
free
Garmin Etrex Mount Legend Bike 35mm by vuXaidu8
.... it's required a big wire strap.
i've used pla, but maybe would be better to use petg or similar.
included freecad file.
Bowstring
3d_export
$10
crossbow
...bow equipped with mechanisms for cocking and lowering the bowstring the crossbow, as a rule, surpassed the usual bow...
3d_export
$6
low-poly bow and quiver
...red leather stripes and decorated with carved lines. a bowstring is made from twisted threads. the sewn leather quiver...
thingiverse
free
Composite Bowstring Finisher by fireflytao
...composite bowstring finisher by fireflytao
thingiverse
composite bowstring
thingiverse
free
Bowstring Equatorial Sundial by alany
...verse
a completely printable bowstring-style equatorial sundial, adjustable for either hemisphere and a large range of latitude.
thingiverse
free
Bowstring winding device
...ps://www.thingiverse.com/thinghaps672243
for assembly, a 50mm bolt and nut m4 are required. 3 furniture nails 1.8-2 mm long 30 mm
thingiverse
free
Archery Bowstring Separator by SorbetOnion
...d want to do with it. simply insert it between the strings where your peep is, and enjoy not needing a massive bow press anymore!
thingiverse
free
Bowstring winding device by MrFreakman
...cheren aufbringen von mittel- und endwicklungen auf der sehne.
die festigkeit der umwicklung kann individuell eingestellt werden.
thingiverse
free
Bowstring winding tool by MechMac666
...
as there may be a lot of different spools available, i added a dummy spool.
last change 30.05.2021: forgot to add the shaft :-)
thingiverse
free
Bowstrings Serving Tool by MomoDajaky
...ther two positions.
i have created a smaller version to fit the right-front corner and the back-center.
a m3-.50 nut is required.
Jig
turbosquid
$25
jig-saw_mid_SM
...uid
royalty free 3d model jig-saw_mid_sm for download as obj on turbosquid: 3d models for games, architecture, videos. (1244761)
turbosquid
$20
jig-saw_low
...osquid
royalty free 3d model jig-saw_low for download as obj on turbosquid: 3d models for games, architecture, videos. (1244760)
turbosquid
$10
jig-saw_hi
...bosquid
royalty free 3d model jig-saw_hi for download as obj on turbosquid: 3d models for games, architecture, videos. (1244757)
turbosquid
$7
Jig Armchair
...squid
royalty free 3d model jig armchair for download as max on turbosquid: 3d models for games, architecture, videos. (1648936)
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Tail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Serving
3ddd
$1
Serving
...serving
3ddd
сервиз
сервировка стола
turbosquid
$18
Serving table
...quid
royalty free 3d model serving table for download as max on turbosquid: 3d models for games, architecture, videos. (1631226)
turbosquid
$15
Serving with peonies
...oyalty free 3d model serving with peonies for download as max on turbosquid: 3d models for games, architecture, videos. (1581862)
turbosquid
$12
Serving table
...quid
royalty free 3d model serving table for download as skp on turbosquid: 3d models for games, architecture, videos. (1610694)
turbosquid
$45
Serving Tray
...alty free 3d model serving tray for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1451044)
3ddd
$1
Serving
... цветы , ваза
tableware done by 3ds max 2015 saved 2012 and obj,,,, hope you like it
turbosquid
$29
Serving trolley
...ee 3d model serving trolley for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1301847)
turbosquid
$13
Serving 10
...ee 3d model serving 10 for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1667649)
turbosquid
$13
Serving 03
...ee 3d model serving 03 for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1564623)
turbosquid
$13
Serving 07
...ee 3d model serving 07 for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1670084)