Thingiverse
selfie stick desk support base by spiritfire_2002
by Thingiverse
Last crawled date: 4 years, 8 months ago
I don't have a desktop spot light but i have some old phones with light.
and i have 2 selfie sticks from my wife
so i think , it's time to design a base to change my selfie sticks and phone as light and desktop camera, and finally the result is here.
Notices:
there are some different files , the file named hole18.4mm is exactly the same thing as you see in the picture.
But as it's name the hole is only 18.4mm, i think you may need different diameters, so i seperate the files to a 80mmx80mm base(bigger than picture because i found the left-right side is not stable if it's too small) and those different diameter holes.
Usage:
So , what you need to do might be:
print the 80X80mm base
choose the hole which match your selfie stick's rod diameter, and print it, if no matched dimension, select the hole which is bigger than your rod because you can wrap some paper around the selfie stick rod so it match the hole.
glue them together.
enjoy.
or if you prefer the narrow one and has 18.4mm rod , then print the 18.4mm version. but not suggested
there is a non-circle hole on the picture is because i have a rod with a special end, it's not a circle, so i measured it and designed it, if you have also special end selfie stick, you need design it accordingly. tell me if you want my help.
and i have 2 selfie sticks from my wife
so i think , it's time to design a base to change my selfie sticks and phone as light and desktop camera, and finally the result is here.
Notices:
there are some different files , the file named hole18.4mm is exactly the same thing as you see in the picture.
But as it's name the hole is only 18.4mm, i think you may need different diameters, so i seperate the files to a 80mmx80mm base(bigger than picture because i found the left-right side is not stable if it's too small) and those different diameter holes.
Usage:
So , what you need to do might be:
print the 80X80mm base
choose the hole which match your selfie stick's rod diameter, and print it, if no matched dimension, select the hole which is bigger than your rod because you can wrap some paper around the selfie stick rod so it match the hole.
glue them together.
enjoy.
or if you prefer the narrow one and has 18.4mm rod , then print the 18.4mm version. but not suggested
there is a non-circle hole on the picture is because i have a rod with a special end, it's not a circle, so i measured it and designed it, if you have also special end selfie stick, you need design it accordingly. tell me if you want my help.