Seed Hopper by SlimBrede

Last crawled date: 3 years, 1 month ago

This is a variety of parts for a Truax FLX-86U no-till drill attached to a John Deere JD-5325 tractor. They are the most durable when printed with PETG and ASA materials.
The seed hopper goes into the main holes and when printing, it needs to be orientated on its top where the holes for the funnel are. The connector goes into the sides of the hopper and can be oriented any way. The funnel needs to be oriented on its top face with the pegs sticking straight upwards. The end cap needs to be printed on it's top face as well with the square pegs aiming upwards.
When setting up / orienting the pieces for printing, take the scale option and type "1000" in the percentage field for the X or Y dimensions. This will take the size it automatically uploads the files as and will increase it by 1000%, taking it out of Millimeters and putting it into Inches.
What is needed:
2 Middle hoppers (1st Picture)
2 Left Hoppers (4th Picture)
2 Right Hoppers (3rd Pictures)
4 connectors (5th Picture)
6 funnels
OPTIONAL: 4 end caps (2nd Picture)
If only middle hoppers are printed, end caps will be needed