Thingiverse
Security Cam - Hardened version
by Thingiverse
Last crawled date: 4 years, 8 months ago
This is a remix of a remix and my first attempt at using openSCAD. Thanks to perb1970 and his great work and the SCAD file. By taking it apart piece by piece, I figured out what I wanted to do. I took perb1970's security camera and ended up hardening it for outdoor use. The SCAD file changes are numerous, but include the addition of o-ring seals on all of the parts, the addition of an end cap to cover the SD card and reset button. I added comments as I figured out what each part did and some customization for indoor (with ports and fan exposed - although you could just use perb1970s version for indoor) and an outdoor version with all of the side ports of the pi zero covered up. The rain hood is not really necessary due to the seals, but still may be a good idea for added protection. I will back in perb1970's UPS battery design when I get the chance.
The camera cover is designed to have a small piece of perspex (25mmx30mm) placed in the opening and sealed with silicon. Nothing thicker than 3mm.
Power is brought in via a hole on the bottom next to the mount point. Tie a knot as a strain relief, but do not seal the hole.
Connections points for +5vdc are on the bottom of the board under the PWR USB port. See this drawing for the solder points - https://cdn.shopify.com/s/files/1/0270/0585/files/PiZeroConnections_large.jpg?14913446398312428817
version 2: In an effort to minimize the potential for water ingress, I redesigned the main body. Changes are:
-Top in now a solid part of the main body
-The pi zero now mounts upside down
-spacers had to be about double in height and a pair of m3x25 (I think) are now needed.
-front piece was extended and the opening size increased. A small ledge was added inside to support the installation of a 25mm x 30mm x 3mm piece of perspex.
Electronics:
Raspberry pi zero W - https://www.raspberrypi.org/products/raspberry-pi-zero-w/
Raspberry pi camera module - https://www.raspberrypi.org/products/camera-module-v2/
Cable for camera to pi zero - https://www.amazon.com/gp/product/B07T4SHQ28/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Screws are all socket cap:
-M3x6 - pi zero (front screws) - qty 2
-M3x8 - bottom (front) cover - qty 2
-M3x10 - end cap - qty 4
-M3x20 - front cover - qty 4
-M3x25 - bottom cover trough spacers and pi zero mount (rear) - qty 2
-M2x6 - raspberry pi camera module mount - qty 4
The "nut trap" takes either a #8-32 nut or an M8.5
Seals:
screw o-rings - 3mm x 1.5mm (1.5x3mm) Metric Buna-N NBR O-Rings (https://www.amazon.com/1-5x3mm-Metric-Buna-N-Durometer-Section/dp/B0180EQ0N8/ref=sr_1_2?keywords=6mm+OD+3mm+ID+o+rings&qid=1577400221&sr=8-2)
front and rear o-rings - Nitrile Rubber 44mm x 48mm x 2mm Seal Rings (https://www.amazon.com/gp/product/B07GJHV9XG/ref=ox_sc_saved_title_1?smid=A1THAZDOWP300U&psc=1)
-bottom gasket seal - .079'' (2 mm) Silicone O-Ring Cord Stock (https://www.amazon.com/gp/product/B00QVB0ZG6/ref=ox_sc_saved_title_2?smid=A3FZE1HJFVXQMI&psc=1)
The camera cover is designed to have a small piece of perspex (25mmx30mm) placed in the opening and sealed with silicon. Nothing thicker than 3mm.
Power is brought in via a hole on the bottom next to the mount point. Tie a knot as a strain relief, but do not seal the hole.
Connections points for +5vdc are on the bottom of the board under the PWR USB port. See this drawing for the solder points - https://cdn.shopify.com/s/files/1/0270/0585/files/PiZeroConnections_large.jpg?14913446398312428817
version 2: In an effort to minimize the potential for water ingress, I redesigned the main body. Changes are:
-Top in now a solid part of the main body
-The pi zero now mounts upside down
-spacers had to be about double in height and a pair of m3x25 (I think) are now needed.
-front piece was extended and the opening size increased. A small ledge was added inside to support the installation of a 25mm x 30mm x 3mm piece of perspex.
Electronics:
Raspberry pi zero W - https://www.raspberrypi.org/products/raspberry-pi-zero-w/
Raspberry pi camera module - https://www.raspberrypi.org/products/camera-module-v2/
Cable for camera to pi zero - https://www.amazon.com/gp/product/B07T4SHQ28/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Screws are all socket cap:
-M3x6 - pi zero (front screws) - qty 2
-M3x8 - bottom (front) cover - qty 2
-M3x10 - end cap - qty 4
-M3x20 - front cover - qty 4
-M3x25 - bottom cover trough spacers and pi zero mount (rear) - qty 2
-M2x6 - raspberry pi camera module mount - qty 4
The "nut trap" takes either a #8-32 nut or an M8.5
Seals:
screw o-rings - 3mm x 1.5mm (1.5x3mm) Metric Buna-N NBR O-Rings (https://www.amazon.com/1-5x3mm-Metric-Buna-N-Durometer-Section/dp/B0180EQ0N8/ref=sr_1_2?keywords=6mm+OD+3mm+ID+o+rings&qid=1577400221&sr=8-2)
front and rear o-rings - Nitrile Rubber 44mm x 48mm x 2mm Seal Rings (https://www.amazon.com/gp/product/B07GJHV9XG/ref=ox_sc_saved_title_1?smid=A1THAZDOWP300U&psc=1)
-bottom gasket seal - .079'' (2 mm) Silicone O-Ring Cord Stock (https://www.amazon.com/gp/product/B00QVB0ZG6/ref=ox_sc_saved_title_2?smid=A3FZE1HJFVXQMI&psc=1)
Similar models
thingiverse
free
LaunchBox
...kx0der&psc=1
alligator clips: https://www.amazon.com/gp/product/b07z646jrc/ref=ox_sc_act_title_5?smid=athz0bi0d2rlh&psc=1
thingiverse
free
Sonoff Enclosure by JeffLZ
...title_o00_s00?ie=utf8&psc=1
https://www.amazon.com/gp/product/b00qvb6qpu/ref=ox_sc_saved_title_1?smid=atvpdkikx0der&psc=1
thingiverse
free
Pi Zero DIN rail mount with USB by cdoc83
...duct/b01hyjlzh6/ref=as_li_ss_tl?ie=utf8&psc=1&linkcode=sl1&tag=dtech1c-20&linkid=6c14fa74b8c872f1ad8524053f0c2c57
thingiverse
free
BoomBox (BoomPipe) by lukasclaus
...regulator (https://www.amazon.de/gp/product/b00eyt1dww/ref=oh_aui_detailpage_o04_s00?ie=utf8&psc=1)
1x 12v plug
1x 12v socket
thingiverse
free
Magnetic Support for Anycubic Mono X - Pi Zero and Camera by brunojptampa
... 1080p on raspbian,
remote management:
pi zero w smart usb flash drive
https://github.com/tds2021/pi-zero-w-smart-usb-flash-drive
thingiverse
free
Ender 3 Voltage Regualtion box with switch
...3_s00?ie=utf8&psc=1
jst-xh: https://www.amazon.com/gp/product/b07x9mj8g2/ref=ppx_yo_dt_b_asin_title_o04_s02?ie=utf8&psc=1
thingiverse
free
Raspberry Pi 3 and camera mount for Hypercube using motionEyes
...0knzc5xvjjpjsfe6cj4
https://www.amazon.com/gp/product/b07zfznmtj/ref=crt_ewc_title_dp_4?ie=utf8&psc=1&smid=a2szcfxjt89wme
thingiverse
free
Raspberry Pi Enclosure for Pelican Case Vault V100 by loganpettit86
...mp;psc=1
raspberry pi 4 4” screenhttps://www.amazon.com/gp/product/b07xbvf1c9/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
Stacked Raspberry Pi Zero Case (Pi, USB-Hub, ePaper HAT) by Simonmicro
...ple case for a raspberry pi zero (w), with all his ports still accessible and a additional space for the epaper hat by waveshare.
3dwarehouse
free
tomons Pendant Light Modern Lantern
...ight modern lantern
3dwarehouse
https://www.amazon.com/gp/product/b07q65v9nh/ref=ox_sc_act_title_1?smid=a3c6fyh2uwe3ll&psc=1
Hardened
3ddd
$1
Hardened Leather Chair
...ather chair
3ddd
стул , hardened , leather
стул
turbosquid
$18
Harden armchair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Hardened Leather Chair
...r chair
3ddd
датский дизайнер николай стиинфат представил свое новое творение — «винтажный» кожаный стул hardened leather chair.
cg_studio
$69
Hardened aircraft shelter3d model
...ter3d model
cgstudio
.c4d - hardened aircraft shelter 3d model, royalty free license available, instant download after purchase.
3ddd
$1
Cliff Harden. Maison Chair
...on
миленькое кресло maisonhttp://www.thefurnish.kz/shop/mebel/mebel-dlya-doma/kresla/kozanye-kresla/26201-kreslo-maison
3ddd
$1
Комод Harden 1001 Dresser B
... 35 см.
глубина 35 см.
высота 53 см.
ссылкаhttp://www.abitant.com/products/lampa-nastolnaya-tucano-tosconova-2016-1290
3d_export
$40
Blastmachine 3D Model
... hardening oven conveyer tinny casing speed-change box crate furnace factory industry
blastmachine 3d model benq72 22363 3dexport
3d_export
$55
Washing machine diff gear 3D Model
... hardening oven washing differential gear conveyer tinny diferencial 155
washing machine diff gear 3d model benq72 22837 3dexport
cg_studio
$55
washing machine3d model
...ny diferencial 155 washing
.3ds .c4d - washing machine 3d model, royalty free license available, instant download after purchase.
3d_export
$5
Short long sword low poly
...t in the hand, a man have a fleshy sword that hardens and softens on the crotch.[video=https://m.youtube.com/watch?v=qxkzvszeaxg]
Cam
archibase_planet
free
Cam
...cam
archibase planet
tv camera equipment
cam dolly - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$8
Cam and Follower
...ry to linear (reciprocating) motion. as the cam rotates, the follower rises and falls in a process known as reciprocating motion.
3d_ocean
$15
Studio Cam
...p. made in 3ds max 2013 1- 3dsmax with vray render included material and light 2- obj file 3- fbx file hope you like it please...
3d_export
$37
thermal cam
...thermal cam
3dexport
turbosquid
$19
Security cam
...oyalty free 3d model security cam for download as ige and obj on turbosquid: 3d models for games, architecture, videos. (1331128)
turbosquid
$40
Security Cam
...y free 3d model security cam for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1601103)
3d_export
$40
security cam
...security cam
3dexport
home security camera
turbosquid
$280
cam-bot
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$33
AT_minivan_(CAM)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
video cam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Security
3d_export
$40
security cam
...security cam
3dexport
home security camera
turbosquid
$55
Secure robot
...squid
royalty free 3d model secure robot for download as obj on turbosquid: 3d models for games, architecture, videos. (1516503)
turbosquid
$14
Security camera.
...d
royalty free 3d model security camera. for download as fbx on turbosquid: 3d models for games, architecture, videos. (1192695)
turbosquid
$5
Security Camera
...id
royalty free 3d model security camera for download as fbx on turbosquid: 3d models for games, architecture, videos. (1260457)
turbosquid
$5
Security Post
...quid
royalty free 3d model security post for download as fbx on turbosquid: 3d models for games, architecture, videos. (1274835)
turbosquid
$4
Security Camera
...id
royalty free 3d model security camera for download as fbx on turbosquid: 3d models for games, architecture, videos. (1298323)
turbosquid
$19
Security cam
...oyalty free 3d model security cam for download as ige and obj on turbosquid: 3d models for games, architecture, videos. (1331128)
turbosquid
$5
security hole
...yalty free 3d model security hole for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1669645)
turbosquid
$95
Megalopolis security
... model megalopolis security for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1253177)
turbosquid
$40
Security Cam
...y free 3d model security cam for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1601103)
Version
3ddd
$1
Diamond version
...nd , version , ванна
visionnaire - diamond bath
turbosquid
$50
LibraryMini Version
...free 3d model librarymini version for download as max and jpg on turbosquid: 3d models for games, architecture, videos. (1617724)
design_connected
$34
Barocco Version 01
...barocco version 01
designconnected
zanotta barocco version 01 computer generated 3d model. designed by progetti, emaf.
design_connected
$27
Barocco Version 02
...barocco version 02
designconnected
zanotta barocco version 02 computer generated 3d model. designed by progetti, emaf.
turbosquid
free
Door [2 versions]
...rbosquid
free 3d model door [2 versions] for download as fbx on turbosquid: 3d models for games, architecture, videos. (1223985)
turbosquid
$2
seat version 0.1
...
royalty free 3d model seat version 0.1 for download as blend on turbosquid: 3d models for games, architecture, videos. (1432653)
3d_export
$10
magnolia grandiflora mature version
...magnolia grandiflora mature version
3dexport
magnolia grandiflora mature version
3d_export
$8
room assets and voxel version
...room assets and voxel version
3dexport
room assets and voxel version
turbosquid
$12
Chip Version 03
...lty free 3d model chip version 03 for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1241145)
turbosquid
$35
Zil Civilian version
... model zil civilian version for download as cgf, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1639420)