Thingiverse
Seatmast mount for Bontrager Flare Tail light by bdanders
by Thingiverse
Last crawled date: 3 years, 2 months ago
I designed this mount as a clean way to mount my Bontrager Flare tail light to the seatmast clamp on my bike. I have an upgraded seat mast cap from the Emonda SLR 10 so it's a different than the standard clamp that comes on most carbon Treks.
The mount is designed to use the Bontrager Flare rack mount for the actual interface with the light and that just bolts into the recess in the printed part. There are slots in the top and bottom to run a small zip tie around the clamp bolt to provide a little extra insurance to make sure nothing falls off. So far after one ride it's been rock solid and I don't expect to have any problems with it.
The mount is designed to use the Bontrager Flare rack mount for the actual interface with the light and that just bolts into the recess in the printed part. There are slots in the top and bottom to run a small zip tie around the clamp bolt to provide a little extra insurance to make sure nothing falls off. So far after one ride it's been rock solid and I don't expect to have any problems with it.
Similar models
thingiverse
free
Bontrager Flare (Rack mounts) by djtaylor
... mounts.
one will go directly onto a 50mm hole spacing in the rack, the other is offset to suit a particular purpose that i have.
thingiverse
free
Garmin Stem Mount by bdanders
...to mount as low as possible on a 90mm, +7° bontrager rxl stem.
i don't have my own printer yet so this was made by shapeways.
thingiverse
free
Bontrager Transmitr Remote Handlebar Mount by bdanders
...e bar so it can't spin. it's extremely secure and is a fantastic addition to my night-riding setup.
printed by shapeways.
thingiverse
free
Headphone Mount by rguisewite
...n the edge of my desk), so i redesigned it (and made it wider to fit around the cubicle's edge) so that it "hangs".
thingiverse
free
Bontrager Light Bracket Skull by Alhajer
...ager light brackets.
the bike looks much cooler with it and its small enough so it won't cause damage/break during accidents.
thingiverse
free
Rack mount bike tail light post by punkgeek
...t (i don't have a seat post ;-) ).use a 3/16" bolt to attach the post to the rack. my rack already had a suitable hole.
grabcad
free
Bontrager ION 100 GoPro Mount
...bontrager ion 100 gopro mount
grabcad
bike light bontrager ion 100 gopro mount
thingiverse
free
Motor clamp to suit motor mount 5.5 by FliteClub
...clamp until pau updates the motor clamp files.
these don't have countersunk holes like the original so 25mm bolts are needed.
thingiverse
free
Monitor Stand Clamp by JjHathaway
...ed to use 2 1/4" x 2" bolts with wingnuts.
scratch project using tinkercad. first 3d printed object that i made myself.
thingiverse
free
Bontrager Rear Light Bag Clip by Reese_Soliarie
...thought might be needed to tap a 2-56 nylon screw into if the clip was not holding tight on the light. i ended up not needing it.
Seatmast
grabcad
free
carbon fibre seatmast
...mast
grabcad
a seatmast matching my
https://grabcad.com/library/custom-carbon-road-bike-frame-1
more to come.. ..stay tuned ;)
grabcad
free
DMLS Seatmast Topper
...es *over* the frame as opposed to inside it. there's more information about the project on my site: http://pencerw.com/topper
grabcad
free
custom carbon road bike frame
...tuned saddle can be found here: https://grabcad.com/library/carbon-saddle-1 seatpostmast here: https://grabcad.com/library/carbon-fibre-seatmast1 matching fork here :...
Bdanders
thingiverse
free
Garmin Stem Mount by bdanders
...to mount as low as possible on a 90mm, +7° bontrager rxl stem.
i don't have my own printer yet so this was made by shapeways.
thingiverse
free
Transmitr remote headset spacer by bdanders
...mm spacer under my stem and tuck the remote neatly underneath.
i don't have my own printer yet so this was made by shapeways.
thingiverse
free
Bontrager Transmitr Remote Handlebar Mount by bdanders
...e bar so it can't spin. it's extremely secure and is a fantastic addition to my night-riding setup.
printed by shapeways.
thingiverse
free
Trek Speed Concept Garmin and GoPro mount by bdanders
...any other accessory that works with that style mount).
i don't have a 3d printer of my own, so this was printed by shapeways.
Bontrager
3ddd
$1
Bicycle from State Bicycle
...model with slight changes in the appearance incuding wheels (bontrager, crankset (sram) and a different handlebars. the 3d model...
thingiverse
free
Flashlight visor for Bontrager Ion800 by JinwooYoo
...flashlight visor for bontrager ion800 by jinwooyoo
thingiverse
bontrager's ion 800 series flash light high beam assist
thingiverse
free
Remix of the SWAT adapter to suit a bontrager light
...remix of the swat adapter to suit a bontrager light
thingiverse
remix of the swat adapter to suit a bontrager light
thingiverse
free
GOPRO saddle Bontrager MontrosePro mount
...r montrosepro mount
thingiverse
gopro mount for saddle montrosepro from bontrager brand. it should works with other saddles too.
thingiverse
free
Bontrager Line Dropper Key Way Kit by tobiasselin
...bontrager line dropper key way kit by tobiasselin
thingiverse
spare parts for bontrager line dropper post.
thingiverse
free
Giant TCR. Luz trasera Bontrager by kinivillaluenga
...ntrager by kinivillaluenga
thingiverse
soporte para luz trasera bontrager para montar en tija. giant tcr 2016, o tija similares.
thingiverse
free
Bontrager Light Bracket Skull by Alhajer
...ager light brackets.
the bike looks much cooler with it and its small enough so it won't cause damage/break during accidents.
thingiverse
free
Bontrager Node Bar Mount by trinnatee
...bontrager node bar mount by trinnatee
thingiverse
recommend using abs
m3 nuts and bolts
thingiverse
free
Bontrager Flare (Rack mounts) by djtaylor
... mounts.
one will go directly onto a 50mm hole spacing in the rack, the other is offset to suit a particular purpose that i have.
thingiverse
free
Bontrager Arvada MTB Saddle GoPro Mount by Corsair2014
...bility. will post some content once i get out and ride! expecting a lot of rocks and mud hitting the gopro in this location ha...
Flare
turbosquid
$1
Flare
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$19
Flare Gun
...s typically used for signalling, as distress signalling, for people at sea or from the ground to aircraft. texture format: .tg...
3d_export
$5
tyris flare
...tyris flare
3dexport
tyris flare 3d model good quality for animation
3d_export
$5
flared glass
...35 polys: 19 651 verts: 18 713 https://www.potterybarn.com/products/pb-classic-sconce-flared-glass-hood/?pkey=csconces-wall-lamps
turbosquid
$10
Flare-Gun
...rbosquid
royalty free 3d model flare-gun for download as obj on turbosquid: 3d models for games, architecture, videos. (1230388)
turbosquid
$5
Flare Gun
...osquid
royalty free 3d model flare gun for download as blend on turbosquid: 3d models for games, architecture, videos. (1611817)
turbosquid
$5
Flare Gun
...
royalty free 3d model flare gun for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1594969)
3d_export
$5
ww2 flare
...ww2 flare
3dexport
design_connected
$16
Crystal Flare Chandelier
...crystal flare chandelier
designconnected
lasvit crystal flare chandelier computer generated 3d model.
turbosquid
$3
Flare Gun
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Tail
3d_export
$10
donkey tail burro tail succulent creeper
...donkey tail burro tail succulent creeper
3dexport
donkey tail | burro tail succulent creeper .
3d_export
$15
The tail of a fish
...the tail of a fish
3dexport
the tail of a fish
3d_export
$10
Machine tail
...machine tail
3dexport
machine tail
3d_export
$20
Mechanical tail
...mechanical tail
3dexport
mechanical tail<br>four-part movement
3d_export
$10
The tail of a fish
...the tail of a fish
3dexport
waist movement
3d_export
$20
Bizarre tail
...bizarre tail
3dexport
four-part movement
turbosquid
$15
Armchair Tail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Wolf Tail
...model wolf tail for download as 3ds, obj, fbx, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1238663)
turbosquid
$10
Red Tail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Tail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
Light
archibase_planet
free
Light
...light
archibase planet
lamp lighting light
light - s2 - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
light luminaire lighting
light l0465 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
lighting
...lighting
3dexport
lighting
3d_export
$5
lighting
...lighting
3dexport
lighting in livingroom
turbosquid
$3
Lighting Tree with Lights
...d model lighting tree with lights for download as max and 3ds on turbosquid: 3d models for games, architecture, videos. (1585507)
archibase_planet
free
Light
...light
archibase planet
luster lighting solution
light - s - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
luster lamp lighting
light 1 - 3d model for interior 3d visualization.
archibase_planet
free
Lights
...lights
archibase planet
surgical lights surgical lamp
surgical lights (floor) - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
lighting luminaire candlelight
light l0463 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$18
street light-lighting-light-xia bing
...
3dexport
street light-lighting-light-xia bing<br>max 2015 v-ray 3 max 2015<br>textures<br>all files in zip...