Thingiverse
SD2Vita Modified by mrcory
by Thingiverse
Last crawled date: 3 years ago
I got my SD2Vita adapter, but the SD card holder sticks out the wrong side. It sticks out the side toward the back of the Vita instead of the front. My print ejects properly, but it causes a bulge of the cart cover a bit. I recommend pushing in the card and locking it with the cart cover.
I give no guarantee that this won't screw up pins or cause other damage. It is untested so far as actually using the adapter as I have to get a usb adapter to format my card.
Tell me if it works for you.
I give no guarantee that this won't screw up pins or cause other damage. It is untested so far as actually using the adapter as I have to get a usb adapter to format my card.
Tell me if it works for you.
Similar models
thingiverse
free
Artillery_X1_USB Cover With Slot by MoldyBlueBerry
...rd slot sticks out on my printer causing the cover to not sit flush. i added a cutout for the sd card slot and now it sits flush.
thingiverse
free
Snap on side covers for ZMR 250 by lbroman
...made covers only for the front and rear part as i has stuff sticking out out from the flight controller in the center of my quad.
thingiverse
free
Wanhao i3 microSD card extension grip by dumbcomputers
...insert the microsd card in with the notch end facing up (*see pic). you'll need a card reader which also sticks the card out.
thingiverse
free
V-Slot Cover Ender 3 with Card and USB Slots
...rint in petg. the little slots didn't want to stick for the first layer. i used glue stick and slowed down my print to 30mm.
thingiverse
free
SD Card Holder by siggib
...hundreds of these on here but i just felt like designing my own :-d
designed this in openscad and included the scad file as well.
thingiverse
free
Mobile Business Card Protector by dmacustombuild
... holder. i made this simple cover that goes over the cards to prevent them from getting damaged when i put my phone in my pocket.
thingiverse
free
SD card cover by BaoTriet
...card covers were broken.therefore, i design it to help others fix their sd card instead of throw it out.
super glue is necessary.
thingiverse
free
Cover for my out side power surply,.//., by karl1964
...cover for my out side power surply,.//., by karl1964
thingiverse
i moved my power surply to the out side of my box
thingiverse
free
SD / USB Holder by RicxVision
...des of the holder and painted it with acryl color.
the holder provides space for 4 sd-cards, 5 micro-sd-cards & 4 usb-sticks.
thingiverse
free
Smart Graphic LCD Case (Remake) by PD5DJ
... out.
i have remade the case with a nice big slot on the side.
now the sd card is sticking out much further. easy to acces now.
Sd2Vita
thingiverse
free
PS5 PSTV Dock by Luckski
...required to take in and out as runs from sd2vita or my 1tb usb drive. quickly painted for photo...
thingiverse
free
PS Vita Gamecard to SD case by collingall
...version 1.5 has been updated to fit thicker 1.0mm sd2vita cards, the osh parks 0.8mm cards fit even better...
Mrcory
thingiverse
free
Basic mt3608 Case by mrcory
...gned it to use an old cut off usb cable that i had laying aroung.
input side holds a 3.15mm cable.
output side holds a 4mm cable.
thingiverse
free
Penn Plax Cascade 400 Filter Cartidge by mrcory
...it would be nice to make a printable cartridge. (one is included that is reusable.)
measurements are from the included cartridge.
thingiverse
free
prusa I3 X idler end (for bearing from metal upgrade) by mrcory
... remove the lower holder for the bearing. this removes the need to cut it out after the print.
(forgive the terrible description)
thingiverse
free
Expandable Mars Base for #MakerBotMars by mrcory
...g a segment and report there results back here. i am quite certain some cleaning will be required and possible some model tweaks.
Modified
turbosquid
$5
modify car
...bosquid
royalty free 3d model modify car for download as max on turbosquid: 3d models for games, architecture, videos. (1390511)
turbosquid
$35
Soleste modified
...e 3d model soleste modified for download as 3dm, stl, and jpg on turbosquid: 3d models for games, architecture, videos. (1646606)
turbosquid
$35
Screwdriver-Modified
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
APS modified
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Modified skull
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
Maruti 800 Modified
...obile engineers. this concept will also helpful to modified car enthusiast. this is made in solidworks & rendered in keyshot.
3d_ocean
$5
Spacecraft with Subdivision Modifier
...raft with subdivision modifier
3docean
fantasy spacecraft vehicle
the model was created in blender using the subdivision modifier
turbosquid
$10
Modified 9mm pistol
...royalty free 3d model modified 9mm pistol for download as fbx on turbosquid: 3d models for games, architecture, videos. (1560956)
3d_export
$10
ak-47 modified
...ak-47 modified
3dexport
turbosquid
$10
modified evo x
...ree 3d model modified evo x for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1461606)