Thingiverse
Screwless Raspberry Pi VESA (100x100) mount by ananace
by Thingiverse
Last crawled date: 4 years, 4 months ago
A simple screwless VESA mount for holding a Raspberry Pi (model B).
The Pi is hooked and snapped into place, with only a bit of friction holding it in place - so don't use this if you expect to tug at CSI/DSI/GPIO cables, as that's likely to pop the Pi loose.
Cables that attach to the sides of the Pi should still work just fine, and can in fact help hold it in place.
The Pi is hooked and snapped into place, with only a bit of friction holding it in place - so don't use this if you expect to tug at CSI/DSI/GPIO cables, as that's likely to pop the Pi loose.
Cables that attach to the sides of the Pi should still work just fine, and can in fact help hold it in place.