Thingiverse
![Scoot 13mm rocket by GrouchoDuke](/previews/8593548.jpg)
Scoot 13mm rocket by GrouchoDuke
by Thingiverse
Last crawled date: 3 years, 2 months ago
Work in progress! I designed this little rocket to take the 13mm Estes motors like the 1/2A3-4T. The rocket should go about 400' in the air on a 1/2A3-4T, which will probably put it out of sight. The body tube is sized so the motor will be slightly loose, so please add masking take to your motor for the appropriate friction.
I've included pointy & blunt nose cone models. 20180128: Added versions with square fin tips to give more surface area on the print bed. OpenRocket shows about 1.3 calibers of stability if you print with PETG at 75% infill. 20180129: Added versions with a tube fin and reduced fin length. I don't have any OpenRocket data for this version, so assume it will be extremely dangerous to fly.
The rocket prints as one piece (using supports) and has tumble/featherweight recovery.
I haven't flown this yet, so use at your own risk. OpenRocket says the 6-finned version with semi-rounded tips is about 1.2 to 1.5 calibers stable with any 13mm Estes motor. That stability will depend on the infill you use in the nose cone though. For the first flight, I'm using a 75% infill.
I've included pointy & blunt nose cone models. 20180128: Added versions with square fin tips to give more surface area on the print bed. OpenRocket shows about 1.3 calibers of stability if you print with PETG at 75% infill. 20180129: Added versions with a tube fin and reduced fin length. I don't have any OpenRocket data for this version, so assume it will be extremely dangerous to fly.
The rocket prints as one piece (using supports) and has tumble/featherweight recovery.
I haven't flown this yet, so use at your own risk. OpenRocket says the 6-finned version with semi-rounded tips is about 1.2 to 1.5 calibers stable with any 13mm Estes motor. That stability will depend on the infill you use in the nose cone though. For the first flight, I'm using a 75% infill.
Similar models
thingiverse
free
![Mini Model Rocket by ryandgarrison](/t/8803785.jpg)
Mini Model Rocket by ryandgarrison
... use a 13 mm diameter estes rocket motor (1/2a or a).
make sure to add about 5-6 grams of weight to the nose cone for stability!!
thingiverse
free
![Model Rocket Fin Can & Nose Cone (BT50) v1 by krusty](/t/8704990.jpg)
Model Rocket Fin Can & Nose Cone (BT50) v1 by krusty
... to suit a bt50 body tube - fin can fits an estes 18mm motor.
created in microsoft's 3d builder.
this is my first 3d object!
grabcad
free
![TARC Rocket Nose Cone 2020-2021](/t/10936148.jpg)
TARC Rocket Nose Cone 2020-2021
...d the nose cone and incorporated it into the rocket. the nose cone is thin to reduce weight and increase the rocket's apogee.
thingiverse
free
![Model Rocket Nose Cones by Aslansmonkey](/t/8269152.jpg)
Model Rocket Nose Cones by Aslansmonkey
... was loose in the nose. hence the "tight" versions. just be prepared for the tight versions to possibly be too tight.
thingiverse
free
![RIM-67A Model Rocket](/t/4908165.jpg)
RIM-67A Model Rocket
...f the motor after flight.
simulations with openrocket indicate that the rocket could reach 337 m height with a single d9-7 motor.
thingiverse
free
![Micro Rocket V4 by UnfortunateFish](/t/8920441.jpg)
Micro Rocket V4 by UnfortunateFish
...micro rocket v4 by unfortunatefish
thingiverse
test rocket. it uses a 1/2a3-4t estes rocket engine.
thingiverse
free
![Estes B6 rocket by VicToMeyeZR](/t/8678898.jpg)
Estes B6 rocket by VicToMeyeZR
...y victomeyezr
thingiverse
basic nose cone and fins that fit right over the rocket motor. they are designed to not be retrieved.
thingiverse
free
![Coshape Model Rocket by coshape](/t/8719604.jpg)
Coshape Model Rocket by coshape
...dle doesn't have to be printed, in fact we used a cardboard tube we found and then adjusted the dimensions in our customizer.
thingiverse
free
![functional rocket body tube with fins by levincoolxyz](/t/9062446.jpg)
functional rocket body tube with fins by levincoolxyz
... the cumulus!!!
once i got more time, i will try to use someone else's idea here to make better (curved) fins with nose cone!
thingiverse
free
![18mm Rocket Kits by Aslansmonkey](/t/8497471.jpg)
18mm Rocket Kits by Aslansmonkey
...fnuknoa
ellipsis (b6-4): https://www.youtube.com/watch?v=pr781x4bs-m
stiletto (c6-3): https://www.youtube.com/watch?v=ov_a_whr3xa
Grouchoduke
thingiverse
free
![757 Covid Mask Hangar by GrouchoDuke](/t/8025936.jpg)
757 Covid Mask Hangar by GrouchoDuke
...? here ya go. this little hook slides onto the center pedestal and gives you a place to hang a typical surgical-style mask. easy.
thingiverse
free
![Twisty Splines Pencil & Pen Cup by GrouchoDuke](/t/8292077.jpg)
Twisty Splines Pencil & Pen Cup by GrouchoDuke
... you want and your max print volume. most typical pens are around 120-130mm long, so it should be close to what you need already.
thingiverse
free
![Parametric Model Rocket Body Tube Cutting Guide by GrouchoDuke](/t/8765043.jpg)
Parametric Model Rocket Body Tube Cutting Guide by GrouchoDuke
... it the size of whatever body tube you enter.
to make this, i modified the code from this:http://www.thingiverse.com/thing:695599
thingiverse
free
![Altus Metrum EasyMini model by GrouchoDuke](/t/8776971.jpg)
Altus Metrum EasyMini model by GrouchoDuke
... and then updated the model. this version isn't perfect, but it's really close to the size of the easymini (version 1.0).
thingiverse
free
![Octopus Watch Band by GrouchoDuke](/t/8668790.jpg)
Octopus Watch Band by GrouchoDuke
...y printer probably works slightly different than yours, so make sure all the parts fit well after you print them on your printer.
thingiverse
free
![HS1177 camera mount for Martian Quadcopter by GrouchoDuke](/t/8815648.jpg)
HS1177 camera mount for Martian Quadcopter by GrouchoDuke
...mm diameter that are 35mm tall. their centers are 34mm apart, which makes their insides 29mm apart and their outsides 39mm apart.
thingiverse
free
![40mm cooling fan guard cover - spiral and hex blades by GrouchoDuke](/t/8292920.jpg)
40mm cooling fan guard cover - spiral and hex blades by GrouchoDuke
...ly recessed fan, so these fan covers are flat on the bottom for easy printing. these will probably work with most other fans too.
thingiverse
free
![Mobius camera mount for 54mm high power rockets (58mm OD) by GrouchoDuke](/t/8710977.jpg)
Mobius camera mount for 54mm high power rockets (58mm OD) by GrouchoDuke
...the rocket. the front and back of the mount extend past the camera so you can attack it to the rocket with a wrap of gaffer tape.
thingiverse
free
![1010 Rail High Power Rocket Support by GrouchoDuke](/t/8729422.jpg)
1010 Rail High Power Rocket Support by GrouchoDuke
...ail and the other is a loose fit. which one you choose depends on your printer's calibration, your rail and your preferences.
Scoot
turbosquid
$20
![Scoot Craft](/t/13322981.jpg)
Scoot Craft
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![vintage army plane scoot](/t/597946.jpg)
vintage army plane scoot
...vintage army plane scoot
3ddd
самолет
rh toy - max 2012 + vbx
cg_studio
$75
![Boeing 787-9 FlyScoot livery3d model](/t/828338.jpg)
Boeing 787-9 FlyScoot livery3d model
... boeing dreamliner
.max - boeing 787-9 flyscoot livery 3d model, royalty free license available, instant download after purchase.
3d_sky
free
![vintage army plane scoot](/t/541137.jpg)
vintage army plane scoot
...vintage army plane scoot
3dsky
plane
rh toy - max 2012 + vbx
thingiverse
free
![scooter fork by masteratdisaster](/t/5028897.jpg)
scooter fork by masteratdisaster
...scooter fork by masteratdisaster
thingiverse
scoot fork
thingiverse
free
![Backup Camera mount for electric scooter by juan05urena](/t/9225149.jpg)
Backup Camera mount for electric scooter by juan05urena
...ackup camera mount for electric scooter by juan05urena
thingiverse
amp meter shell for es18 t85 boyeda and other similar scoots
thingiverse
free
![Pentagon wrench / key for curb box or meter box by scoot-skute](/t/9245710.jpg)
Pentagon wrench / key for curb box or meter box by scoot-skute
...our needs.
see the misc notes in the print settings for information about measuring your screw head and scaling this tool to fit.
thingiverse
free
![Balloon powered Jet Car by AphoticJezter](/t/9059536.jpg)
Balloon powered Jet Car by AphoticJezter
...simple kids toy. attach a balloon and watch it scoot across the floor! (sorry, some extra parts...
thingiverse
free
![Bane Mask - a prosthetic attachment for the Montana Mask by scoot-skute](/t/5093861.jpg)
Bane Mask - a prosthetic attachment for the Montana Mask by scoot-skute
...n be removed and another design can be built up on the same plate to attach to your mask. i hope to see more fun designs pop up.
13Mm
3d_export
$15
![ring perlanddiamonds](/t/11495955.jpg)
ring perlanddiamonds
...ring perlanddiamonds 3dexport perl - 12-13mmlt;br>gemstones:<br>2mm - 30<br>1mm - 177<br>size 17.5<br>gold 14k ~ 10g<br>silver ~...
3d_export
$5
![signet ring with rectangular stone](/t/11698916.jpg)
signet ring with rectangular stone
...ring with rectangular stone 3dexport volume: 790,297<br>gems: 5mm - 13mmlt;br>size: 20mm<br>the weight :<br>gold - 10.46<br>silver - 8.1<br>format: .stl,...
3d_export
$15
![earrings perlsanddiamonds](/t/11495830.jpg)
earrings perlsanddiamonds
...earrings perlsanddiamonds 3dexport earrings perls&diamonds<br>perls 12-13mmlt;br>gemstones:<br>1mm - 256<br>1.5mm - 2<br>2mm - 14<br>gold 14k ~ 8g<br>silver...
3d_export
$19
![Eraser 02](/t/13058631.jpg)
Eraser 02
...vertex with more than 5 edges: 0<br>object:<br>- dimension mm: 13mm x 40mm x 6mm<br>- dimension cm: 1.3cm x 4cm...
thingiverse
free
![13mm Wrench by jbswaff](/t/8938454.jpg)
13mm Wrench by jbswaff
...13mm wrench by jbswaff
thingiverse
13mm wrench
thingiverse
free
![13mm wrench by n0ah06](/t/8840928.jpg)
13mm wrench by n0ah06
...13mm wrench by n0ah06
thingiverse
13mm wrench stl
thingiverse
free
![Tronxy 13mm wrench](/t/4737575.jpg)
Tronxy 13mm wrench
...tronxy 13mm wrench
thingiverse
13mm wrench for hotend fitting on tronxy x1...
thingiverse
free
![13mm wrench 3.0 by n0ah06](/t/8840656.jpg)
13mm wrench 3.0 by n0ah06
...13mm wrench 3.0 by n0ah06
thingiverse
13mm wrench
thingiverse
free
![Riemenrad 40Z 13mm by ingridvogel](/t/9029072.jpg)
Riemenrad 40Z 13mm by ingridvogel
...riemenrad 40z 13mm by ingridvogel
thingiverse
riemenrad 13mm
thingiverse
free
![Drillholder 5.5-13mm by PerryRhodan5000](/t/8140950.jpg)
Drillholder 5.5-13mm by PerryRhodan5000
...drillholder 5.5-13mm by perryrhodan5000
thingiverse
a little drill holder 5,5-13mm.
Rocket
3d_export
$5
![rocket](/t/11388172.jpg)
rocket
...rocket
3dexport
rocket 3d model low poly
3d_export
$5
![rocket](/t/11388152.jpg)
rocket
...rocket
3dexport
rocket low poly 3d model cartoon
archibase_planet
free
![Rocket](/t/945831.jpg)
Rocket
...rocket
archibase planet
rocket toy
rocket tintin's n290813 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_export
$5
![Rocket](/t/13048853.jpg)
Rocket
...rocket
3dexport
the rocket is made from a cylinder made in blender 3.0
turbosquid
$6
![Rocket Baby Rocket Stool](/t/13499221.jpg)
Rocket Baby Rocket Stool
...el rocket baby rocket stool for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1502645)
turbosquid
$15
![rocket](/t/13279752.jpg)
rocket
...ket
turbosquid
royalty free 3d model rocket for download as on turbosquid: 3d models for games, architecture, videos. (1340796)
turbosquid
$10
![Rocket](/t/13297412.jpg)
Rocket
...ket
turbosquid
royalty free 3d model rocket for download as on turbosquid: 3d models for games, architecture, videos. (1247547)
3d_export
$5
![scifi rocket](/t/12643774.jpg)
scifi rocket
...scifi rocket
3dexport
scifi rocket
turbosquid
$199
![rockets](/t/13512852.jpg)
rockets
...turbosquid
royalty free 3d model rockets for download as max on turbosquid: 3d models for games, architecture, videos. (1233135)
turbosquid
$30
![Rocket](/t/13242127.jpg)
Rocket
...
turbosquid
royalty free 3d model rocket for download as fbx on turbosquid: 3d models for games, architecture, videos. (1290260)