Thingiverse
![Scara Test by chaserof](/previews/8683142.jpg)
Scara Test by chaserof
by Thingiverse
Last crawled date: 3 years, 1 month ago
Was inspired from https://www.thingiverse.com/thing:1241491
sry my english is bad ;)
Is not Testet "Grad only in cad finished 98%" A few things still come.
Tooth from Printet gt2 wheel is 128 ,Would be a translation by a 16 tooth pulley 8:1.
With additional reinforcements,At the arm and at the Z axe.
The arms Hole spacing is 150mm and 160mm
all Bearing 688 ZZ / 8x16x5 mm
Lm8uu long 45mm
Holder for Alu groove profile 20x20 with 5mm Nut
I use my Printer with standard pulley settings in the firmware.
Make everything holes always a bit bigger
8mm holes are 8.1mm
15mmholes = 15.25mm
If someone else still a fault discovered simply scream ;)
Update 13.07 Printing to 70% finisch ;) ,tonight the rest should be finished.
I have never printed such a big one :).
Have the arm first put together to looks cool.
14.07.
In the front arm I have see 2 problems.
Transferring toothed belt pulley as the belt is clamped.
I've glued a toothbrush. I'll see how long it lasts.
The toothed belt only goes 90 degrees on both sides.
Inspirational solution found from.https://www.thingiverse.com/thing:1522234
and i have made a Belt Connector.
The first toothed belt on the large pulleys spans is a fiddly job.
And the belt are to fit tightly.
I would notice sooner if not take my viacad while caching always shattered
"since again and again something had to make again 300x"
sry my english is bad ;)
Is not Testet "Grad only in cad finished 98%" A few things still come.
Tooth from Printet gt2 wheel is 128 ,Would be a translation by a 16 tooth pulley 8:1.
With additional reinforcements,At the arm and at the Z axe.
The arms Hole spacing is 150mm and 160mm
all Bearing 688 ZZ / 8x16x5 mm
Lm8uu long 45mm
Holder for Alu groove profile 20x20 with 5mm Nut
I use my Printer with standard pulley settings in the firmware.
Make everything holes always a bit bigger
8mm holes are 8.1mm
15mmholes = 15.25mm
If someone else still a fault discovered simply scream ;)
Update 13.07 Printing to 70% finisch ;) ,tonight the rest should be finished.
I have never printed such a big one :).
Have the arm first put together to looks cool.
14.07.
In the front arm I have see 2 problems.
Transferring toothed belt pulley as the belt is clamped.
I've glued a toothbrush. I'll see how long it lasts.
The toothed belt only goes 90 degrees on both sides.
Inspirational solution found from.https://www.thingiverse.com/thing:1522234
and i have made a Belt Connector.
The first toothed belt on the large pulleys spans is a fiddly job.
And the belt are to fit tightly.
I would notice sooner if not take my viacad while caching always shattered
"since again and again something had to make again 300x"
Similar models
thingiverse
free
![Improvement X Idler for GT2 pulley-belt by nntuan](/t/8285990.jpg)
Improvement X Idler for GT2 pulley-belt by nntuan
... pulley 20 tooth, therefore i improvement small thing for that. hope helful for you.
many thank simhopp for design with sketchup.
thingiverse
free
![Y belt fastener for Prusa i3 Steel in OpenSCAD by Professional3D](/t/8950607.jpg)
Y belt fastener for Prusa i3 Steel in OpenSCAD by Professional3D
...lt must be horizontal.
if you make this thing i would like to see it! upload a photo of your print with "i made one".
thingiverse
free
![Timing Belt Pulleys by saleem145](/t/9011018.jpg)
Timing Belt Pulleys by saleem145
...nt parts be molded in?
what would you build with it?
would you like any parts modified?
we welcome other comments and suggestions
thingiverse
free
![Customizable Flexible Tooth Belt by mschiller](/t/8838396.jpg)
Customizable Flexible Tooth Belt by mschiller
...ted from flexible material. i am using flexfill from fillamentum.com.
example of usage: http://www.thingiverse.com/thing:1550851
thingiverse
free
![Dual Z - Belt Driven - Single Motor - Rear Mount by Mamonski](/t/10252351.jpg)
Dual Z - Belt Driven - Single Motor - Rear Mount by Mamonski
...rdered gt2-6 close loop timing belt in 750mm and 800mm length... waiting to get deliver.... and i will update this post again...
thingiverse
free
![Tronxy X3S Y Axis Belt Tensioner by FourDogs](/t/8638252.jpg)
Tronxy X3S Y Axis Belt Tensioner by FourDogs
...ey bracket a bit to fit my toothed idler.
you'll need to print all other parts from https://www.thingiverse.com/thing:2493074
thingiverse
free
![Timer pulley by Zaggo](/t/9071223.jpg)
Timer pulley by Zaggo
...r belt doesn't get enough grip on its teeth at .5mm printing.
the gcode file contains the object, processed for .5mm nozzles!
thingiverse
free
![Z9M3 Rear belt Alignment and Tensioner CoreXY by gallaghersart](/t/8276302.jpg)
Z9M3 Rear belt Alignment and Tensioner CoreXY by gallaghersart
...d bought spacer from local hardware store)
2x 60 toothed 5mm bore pully
2x m5 bolt
2x 20 toothed pulley
some washers
enjoy!
`mike
thingiverse
free
![X Belt holder self locking by nudelpapst](/t/8548038.jpg)
X Belt holder self locking by nudelpapst
... didn't use a spring as i think it is not necessary.
make sure to have a belt tensioner installed before you use this holder!
thingiverse
free
![15mm Belt 24tooth timing belt pulley by JacobACook](/t/8579385.jpg)
15mm Belt 24tooth timing belt pulley by JacobACook
...a 15mm 24 tooth timing belt pulley, it is modified from andymark's 9mm 24 tooth timing belt pulley.
have to scale up by 1000%
Chaserof
thingiverse
free
![Mini Turbo fan by chaserof](/t/8819100.jpg)
Mini Turbo fan by chaserof
...urbo fan by chaserof
thingiverse
mini tubo fan from milk frotherhttps://youtu.be/yvpqre7mssk
the fan have from here an rescalet
thingiverse
free
![Printer Rodi V2 by chaserof](/t/8955643.jpg)
Printer Rodi V2 by chaserof
...eprap ramps v1.4 2004 lcd
a small wonder i'm looking for reprap ramps v1.4 2004 lcd
sanguinololu smartadapter the assignment.
thingiverse
free
![Pottie Project by chaserof](/t/8963986.jpg)
Pottie Project by chaserof
...ge.
and am now almost finished, here comes yet the housing drann with smoke extraction system and so, and then the electronics.
thingiverse
free
![bad Pla extruder/bowden crack fix idea by chaserof](/t/8773295.jpg)
bad Pla extruder/bowden crack fix idea by chaserof
...with a temperature control switchhttp://www.banggood.com/dc-12v-50-to-110-temperature-control-switch-heat-cool-temp-p-933303.html
thingiverse
free
![Rodi Printer alpha by chaserof](/t/8975568.jpg)
Rodi Printer alpha by chaserof
...lt.
project is almost to an end, now is still a housing for rotating encoder and 2004 lcd with sd cardhttp://youtu.be/l0xldqd6_ji
Scara
turbosquid
$99
![SCARA Robot Rigged](/t/13389317.jpg)
SCARA Robot Rigged
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
sketchfab
$183
![Model Scara Pod](/t/12847162.jpg)
Model Scara Pod
...model scara pod
sketchfab
model scara pod - buy royalty free 3d model by daciasport
thingiverse
free
![Scara robotic arm by Idegraaf](/t/8872563.jpg)
Scara robotic arm by Idegraaf
...scara robotic arm by idegraaf
thingiverse
scara robotic arm for educational purposes. not tested yet.
thingiverse
free
![Scara robotic arm by kerbetos](/t/8638964.jpg)
Scara robotic arm by kerbetos
...scara robotic arm by kerbetos
thingiverse
scara robotic arm remix in openscad top and bottom with sources
thingiverse
free
![Desktop SCARA robot by YANG_GT](/t/8675822.jpg)
Desktop SCARA robot by YANG_GT
... scara robot by yang_gt
thingiverse
a desktop scara robot based on reprap.
all the files are in dsr.zip,but it's in chinese.
thingiverse
free
![FirePick SCARA by Snuffles](/t/8820920.jpg)
FirePick SCARA by Snuffles
...irepick.org ).
later when i have complete the conversion fully to openscad i will release those files as well as the stl files.
thingiverse
free
![Scara robot model by AMT_services](/t/9693115.jpg)
Scara robot model by AMT_services
...ot model by amt_services
thingiverse
scara model kit with nema 17 geared stepper motor, design to use as laser engraver machine.
thingiverse
free
![Truss scara WIP](/t/4919653.jpg)
Truss scara WIP
...5-10 mins to render in openscad.
did not build it myself yet.
will add 3rd axis sometime. and stl's, build instructions, etc.
thingiverse
free
![2048 Playing Scara by robdobson](/t/8828729.jpg)
2048 Playing Scara by robdobson
... game playing robot based on the scara robot from idegraaf. more details here http://robdobson.com/2016/05/play2048witharobotarm/
thingiverse
free
![Scara Arm adapter for laser 2.5W by 99nick](/t/8711211.jpg)
Scara Arm adapter for laser 2.5W by 99nick
...scara arm adapter for laser 2.5w by 99nick
thingiverse
adapter for 2.5w laser on scara robot by idegraaf.
Test
turbosquid
$99
![test](/t/13242737.jpg)
test
...st
turbosquid
royalty free 3d model test for download as max on turbosquid: 3d models for games, architecture, videos. (1251637)
turbosquid
$63
![TEST](/t/13245138.jpg)
TEST
...st
turbosquid
royalty free 3d model test for download as max on turbosquid: 3d models for games, architecture, videos. (1446233)
turbosquid
$1
![test](/t/13241029.jpg)
test
...st
turbosquid
royalty free 3d model test for download as fbx on turbosquid: 3d models for games, architecture, videos. (1360941)
3d_export
free
![johnny test](/t/11930490.jpg)
johnny test
...johnny test
3dexport
johnny test 3d
turbosquid
$15
![Test](/t/13237916.jpg)
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
![test](/t/13239443.jpg)
test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Test](/t/13235512.jpg)
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![test](/t/13232005.jpg)
test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Test](/t/13259250.jpg)
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![gripper test](/t/11462193.jpg)
gripper test
...gripper test
3dexport
robot gripper test model