Thingiverse
SCALEPRINT RESIN PRINTER TEST PIECE by timbologist
by Thingiverse
Last crawled date: 4 years, 6 months ago
As seen by the latest models and the finest of some of the parts I need to find out the best settings for my SLA and DUP and DLP printers and the resins I use, So I needed a test piece that was quick to print and gave me the information that I am looking for.
So I designed my own that gives me the information that I need and fairly quickly SLA about 20 mins at 25uM. I have attached a picture below and about an hour on the D7. The full height is 2.4mm and the base is 0.4mm thick.
I know there are many so called test prints available for download that seem to use a lot of resin , most are designed by resin manufacturer’s and take a long time to print some many hours.
So I designed my own that gives me the information that I need and fairly quickly SLA about 20 mins at 25uM. I have attached a picture below and about an hour on the D7. The full height is 2.4mm and the base is 0.4mm thick.
I know there are many so called test prints available for download that seem to use a lot of resin , most are designed by resin manufacturer’s and take a long time to print some many hours.