Cults
Scale wheels and tires for ESM P-51 Mustang
by Cults
Last crawled date: 6 years, 2 months ago
Printable scale wheels for the 1800 mm ESM P-51B and P-51D models. They are 1/6.26-scale, like the ESM model. They can be resized for other planes, off course. The bolt sizes have to be changed accordingly.
Use four M3x20 mm bolts to assemble each main wheel. Use CA glue to assemble the tail wheel.
Print four tire halves from your favourite TPE and glue together with Plasti dip liquid tape (or other glues that will stick to your favourite TPE) and use a soldering iron to weld together the edge.
Wedge02 - Wedges for using the 90° heavy duty retracts from Hobbyking.
Door02 - Wheel doors.
Door03 - Cover for retracts.
Door04 - Mount point for door link on Robostrut 672 legs.
Tailgear02 - Scale tail gear leg for Hobbyking metal tail retract.
The large inner wheel doors need to be heat formed after printing so that they fit the curvature of the wing. This takes practice. 3D printing them with the right curve intact is not viable as it would require a lot of difficult to remove support material. Here's a video showing the gear doors:
https://youtu.be/2lypqoKAEzg
Use four M3x20 mm bolts to assemble each main wheel. Use CA glue to assemble the tail wheel.
Print four tire halves from your favourite TPE and glue together with Plasti dip liquid tape (or other glues that will stick to your favourite TPE) and use a soldering iron to weld together the edge.
Wedge02 - Wedges for using the 90° heavy duty retracts from Hobbyking.
Door02 - Wheel doors.
Door03 - Cover for retracts.
Door04 - Mount point for door link on Robostrut 672 legs.
Tailgear02 - Scale tail gear leg for Hobbyking metal tail retract.
The large inner wheel doors need to be heat formed after printing so that they fit the curvature of the wing. This takes practice. 3D printing them with the right curve intact is not viable as it would require a lot of difficult to remove support material. Here's a video showing the gear doors:
https://youtu.be/2lypqoKAEzg
Similar models
cults
$11
1/4 scale FW190 wheel and tire
...e bolts need to be m2.5x28 mm screws, and the center hole will be 8 mm.
for personal use only, not for resale or redistribution.
cults
$14
ESM P-51D Accessories
... one to avoid overheating the plastic. install with a screw 380 mm forward of the rudder hinge point. this is the scale position.
cults
$11
Wheel set for ESM F7F Tigercat.
...ww.youtube.com/watch?v=7hlkjdslank
video of my nose wheel:
https://youtu.be/ukhxzvsbtse
for personal use only, not for resale.
cults
free
Mustang P-51
...mustang p-51
cults
p-51 mustang warbird aircraft. plane
warbird mustang p-51
cults
$1
Manual winch
...the set can be used to mount toys on the scale 0.5
gear ratio 0.5
the spring / lever assembly preparation see photo attached.
cults
$2
Candy washing machine door hook Top 11551D
...g machine candy top 115 51d.
it has been printed and works perfectly on the washing machine.
do not buy the door + hook assembly.
cults
free
Simple 3D-printable Pine tree
...out the need of glue.
the design and scale of this model is made to fit the 3dcastleplayset
video: https://youtu.be/njx8naozaio
cults
free
Glueless 1/10 RC car wheels
... if you want it to breathe.
the wheels require the following screws:
-4x m2x6 for each front wheel
-4x m2x12 for each rear wheel
cults
free
Gears 4 -Gears -4
...e is no play in the sprockets.
you can print on a smaller scale if you want.
you can continue with more wheels if you want.
nop21
cults
free
RC monster truck wheel
...le left tire. 73 mm width. fits narrow wheel.
tireright-narrow.stl - narrow printable right tire. 73 mm width. fits narrow wheel.
51D
cults
$14
ESM P-51D Accessories
... one to avoid overheating the plastic. install with a screw 380 mm forward of the rudder hinge point. this is the scale position.
cults
$2
Candy washing machine door hook Top 11551D
...g machine candy top 115 51d.
it has been printed and works perfectly on the washing machine.
do not buy the door + hook assembly.
Esm
cults
$11
Wheel set for ESM F7F Tigercat.
...ww.youtube.com/watch?v=7hlkjdslank
video of my nose wheel:
https://youtu.be/ukhxzvsbtse
for personal use only, not for resale.
cults
$14
ESM P-51D Accessories
... one to avoid overheating the plastic. install with a screw 380 mm forward of the rudder hinge point. this is the scale position.
cults
$22
Dummy radial engine. Pratt & Whitney R2800
...formed dummy engines. designed for my 1:7.5 scale rc esm f7f tigercat. diameter: 166 mm. inside cavity large diameter:...
Mustang
cults
free
MUSTANG 2016
...mustang 2016
cults
car model mustang sport
pretty pretty this mustang to print / paste the color you want!
cults
free
Mustang P-51
...mustang p-51
cults
p-51 mustang warbird aircraft. plane
warbird mustang p-51
cults
$10
ford mustang gt 500
...odel gt500
a 100% printable model! a ’ford shelby mustang gt 500, with a lot of details, designed especially for fdm 3d printers.
cults
$3
P51 MUSTANG (P51B-5 NA)
...a6m3-zero
f4u cosair: https://cults3d.com/en/art/f4u-corsair
sr71 a blackbird: https: // cults3d .com / gadget / sr71-a-blackbird
cults
free
Wolverine Re-Sculpt
...wolverine re-sculpt cults thanks mustang dave for finding this and making it printable in...
cults
$4
SmallToys - Cars pack
...trains ...). this pack contains 8 vehicles including the mustang car also available separately (sample). update (january 2018): added...
cults
free
Ghostbusters Terror Dog Re-Sculpted
...ghostbusters terror dog re-sculpted cults thanks again mustang dave for finding it and adam beamish for the...
cults
free
Ultimate Biplane 10-300S
...hands). few years ago i wanted to build the mustang p-51. i found some plans and started building. however,...
cults
free
Panthro Resculpted (36mb)
...panthro resculpted (36mb) cults thanks to mustang dave for finding it, and of course adam beamish...
51
cults
free
Mustang P-51
...mustang p-51
cults
p-51 mustang warbird aircraft. plane
warbird mustang p-51
cults
$7
bague feuilletée
...bague feuilletée cults bague design taille 51 ...
cults
$7
bague papillon T51
...bague papillon t51
cults
bague design taille 51.
cults
$7
bague perlée T51
...bague perlée t51
cults
bague design taille 51.
cults
$8
bague siamoise ondulée T51
...bague siamoise ondulée t51
cults
bague design taille 51.
cults
$7
bague fragment ondulée T51
...bague fragment ondulée t51
cults
bague design taille 51.
cults
free
Bevel Gear Toy Set, 17/51 Tooth or 3:1 Ratio
... check out my website or my shop on etsy!
http://shookideas.com
https://www.etsy.com/shop/shookideas?ref=hdr_shop_menu
thanks!
cults
$1
Filament spool shaft
...the side of the filament coil (3 files available 51 mm, 53 mm, 55 mm) for a 10 mm...
cults
free
Bust of Auguste crowned with oak
...from the roman villa chiragan martres-tolosane (excavations 1826-1830). h. 51 l. 34 p. 25 cm inv. ra 57 https://tools.wmflabs.org/reasonator/?&q=24580187...
Tires
cults
free
Microsizer replacement tires
...here around the year 2000. over time, my tires degraded and fell apart, so i modelled these replacement tires for the microsizer.
cults
free
Tire hub cap
...ed, so reversed engineered a simpel cap.
printed with the following material: https://www.goedkope3dfilamenten.nl/basic-pla-wit/
cults
free
OPENRC F1 2017 updated Rain Tires
...openrc f1 2017 updated rain tires
cults
openrc f1 2017 updated rain tires
openrc f1 2017 updated rain tires
cults
$11
RIP-Tire, Wheel junkrat OW
...rip-tire, wheel junkrat ow
cults
blizzard junkrat ow overwatch over watch
brrring!
rip-tire ready to roll!
#dagocults
cults
$4
robot qui tire la langue
...robot qui tire la langue
cults
robot smiley
cults
$5
Twinning traktor tire 1/32 (d=50mm)
...twinning traktor tire 1/32 (d=50mm)
cults
model traktor tire 1/32 scale
scale 1/32
cults
free
Set of NoS (No Screws) RC-tires dedicated to OpenRC Truggy
...ruggy
cults
set of nos (no screws) rc-tires dedicated to openrc truggy
set of nos (no screws) rc-tires dedicated to openrc truggy
cults
free
Blister tire for OpenRC F1 car.
...ter on carpet than 3d-printed slicks, but i have no way of testing it. i will test it on tarmac soon with 90a hardness elastomer.
cults
free
Wheels for OpenRC F1 for F104 tires and differential
...//www.thingiverse.com/thing:2361718
if you don't want to run with a differential you can print two of the left rear instead.
cults
$1
tire ( tyre ) 3d model for printing
... for printing
➤ video tutorial : https://goo.gl/p6m5cd
➤ subscribe to my channel : http://bit.ly/2zvlj25
3d model format: stl
Rc
cults
free
RCS Malebot
...rcs malebot
cults
rcs malebot
rcs malebot
cults
free
RCS Hex Chain
...rcs hex chain
cults
rcs hex chain
rcs hex chain
cults
free
RCS Tree Ornaments
...rcs tree ornaments
cults
rcs tree ornaments
rcs tree ornaments
cults
free
RC Plane Stand
...rc plane stand
cults
rc plane stand
rc plane stand
cults
free
Skis for RC planes
...skis for rc planes
cults
skis for rc planes
skis for rc planes
cults
free
RCS Vacuum mold
...rcs vacuum mold
cults
rcs vacuum mold
rcs vacuum mold
cults
$2
Rc dashboard ladybug / beetle for RC 1/10
... drift scale beetle vw classic car rc car
dashboard and fly for rc 1/10 tamiya ladybug / bettle
attention to l scale of the fly
cults
$21
Flying Wings RC
...flying wings rc
cults
flying wings rc
cults
$3
Nitro RC horns
...nitro rc horns
cults
aileron modeling rc traxxas
3d model of an aleron for an automodelo rc 1/10 or 1/8.
cults
free
RC model engine
...rc model engine
cults
this is a mockup of an enya rc model engine.
P
cults
free
P-47 Thunderbolt
...p-47 thunderbolt
cults
p-47 thunderbolt
p-47 thunderbolt
cults
free
Mustang P-51
...mustang p-51
cults
p-51 mustang warbird aircraft. plane
warbird mustang p-51
cults
$3
Curtiss P 40 Warhawk
...curtiss p 40 warhawk
cults
curtiss p 40 warhawk
curtiss p 40 warhawk
cults
free
Schwarz P surface lattice
...schwarz p surface lattice
cults
schwarz p surface lattice
schwarz p surface lattice
cults
$1
I said with letter P
...i said with letter p
cults
said letter p
dimensions 30mm x 40mm x 3mm.
cults
$7
p a w
...lts
janeandlisa dontbesuchasquare ring customjewelry
let your inner animal show with this little one. perfect for ring stacking.
cults
free
smarthone and tablet PC stand - uni-stand-P -
...d tablet pc stand - uni-stand-p -
cults
smarthone and tablet pc stand - uni-stand-p
smarthone and tablet pc stand - uni-stand-p -
cults
free
MRH MOLLE To P-Rail Adapter
... another mrh accessory, this converts any p-rail system into a molle compatible system, male & female adapters available.
cults
free
Jonction-P
...nce. the 3d model should adjust to it’s new dimensions automatically.
make sure to watch the video: https://youtu.be/b27dtyzjgwe
cults
free
Triple P-Rails
...e p-rails
cults
great for air-soft.
!don't forget to check out my other designs and follow my daily kookoo uploads, enjoy ;)
Wheels
cults
free
wheel
...wheel
cults
wheel car robo
wheel for motor
cults
free
Wheel
...wheel
cults
car hub rim tire wheel
a wheel from an abandoned car project.
cults
$1
Lego duplo - Wheel - Wheel
... wheel rack, this wheel is identical to the duplo wheel for the flash mc queen model of the cartoon cars
dimension 26,1x11mm
cults
free
Wheel - Wheel and Pneumatic
...wheel and pneumatic
for key holder, to hang in his car, to put on his desk
in silver color
and also, with a black felt!
a +
nop21
cults
free
Pelton wheel
...pelton wheel
cults
pelton wheel
pelton wheel
cults
free
Wheel Trophy
...wheel trophy
cults
wheel trophy
wheel trophy
cults
free
ring wheel wheelbarrow wheel robomow
...om robomow wheel extension wheel crampon
the original hubcap is mounted on this new ring
the pink ring
photos to come
cults
$1
Sport wheel
...sport wheel
cults
sport wheel for any project.
cults
$1
Lego duplo - Wheel stand - wheel support
...ults
cars toy lego duplo mc queen flash art car wheel
lego wheel carrier duplo going on with lego wheel,
dimension 62x32x9mm
cults
$1
Wheel dishwasher & Axis wheel dishwasher
...asher wheel file. it is rather classic and adapts to a lot of dishes. the axis of attachment of the wheel is included in the file
Wheel
cults
free
wheel
...wheel
cults
wheel car robo
wheel for motor
cults
free
Wheel
...wheel
cults
car hub rim tire wheel
a wheel from an abandoned car project.
cults
$1
Lego duplo - Wheel - Wheel
... wheel rack, this wheel is identical to the duplo wheel for the flash mc queen model of the cartoon cars
dimension 26,1x11mm
cults
free
Wheel - Wheel and Pneumatic
...wheel and pneumatic
for key holder, to hang in his car, to put on his desk
in silver color
and also, with a black felt!
a +
nop21
cults
free
Pelton wheel
...pelton wheel
cults
pelton wheel
pelton wheel
cults
free
Wheel Trophy
...wheel trophy
cults
wheel trophy
wheel trophy
cults
free
ring wheel wheelbarrow wheel robomow
...om robomow wheel extension wheel crampon
the original hubcap is mounted on this new ring
the pink ring
photos to come
cults
$1
Sport wheel
...sport wheel
cults
sport wheel for any project.
cults
$1
Lego duplo - Wheel stand - wheel support
...ults
cars toy lego duplo mc queen flash art car wheel
lego wheel carrier duplo going on with lego wheel,
dimension 62x32x9mm
cults
$1
Wheel dishwasher & Axis wheel dishwasher
...asher wheel file. it is rather classic and adapts to a lot of dishes. the axis of attachment of the wheel is included in the file
Scale
cults
free
Dragon (18mm scale)
...dragon (18mm scale)
cults
dragon (18mm scale)
dragon (18mm scale)
cults
free
The Awoken (15mm scale)
...the awoken (15mm scale)
cults
the awoken (15mm scale)
the awoken (15mm scale)
cults
free
OctoWalker (18mm scale)
...octowalker (18mm scale)
cults
octowalker (18mm scale)
octowalker (18mm scale)
cults
free
Scale Cookie Cutter
...scale cookie cutter
cults
scale cookie cutter
scale cookie cutter
cults
free
28mm Scale Omnisphere
...28mm scale omnisphere
cults
28mm scale omnisphere
28mm scale omnisphere
cults
free
Longshadow (18mm scale)
...longshadow (18mm scale)
cults
longshadow (18mm scale)
longshadow (18mm scale)
cults
free
Gazebo (N-Scale)
...cale.
it is a companion structure for my suburban n-scale house which can be found here: https://cults3d.com/en/users/mfouillard
cults
free
Vanara Adventurer (18mm scale)
...vanara adventurer (18mm scale)
cults
vanara adventurer (18mm scale)
vanara adventurer (18mm scale)
cults
free
Dominion ExoKnights (18mm scale)
...dominion exoknights (18mm scale)
cults
dominion exoknights (18mm scale)
dominion exoknights (18mm scale)
cults
free
OpenRC F1 250% scaled
...openrc f1 250% scaled
cults
openrc f1 250% scaled
openrc f1 250% scaled