Thingiverse
Scalar - Compact Nut Adaptors for SFU1204 Holders to M8 + Tr08x1.5 nuts by 3DModularSystems
by Thingiverse
Last crawled date: 4 years, 2 months ago
Description
This thing allows to convert 1 nut system into another .
For example,
You can convert a system using SFU1204 leadscrew into a system using either M8 threaded rod or Tr08x1.5 trapezoidal screw.
What you need:
For each scenario you will need either a M8 nut or a Tr08x1.5 Hex nut.
Those nuts will be inserted into the adapter making it compatible with the current SFU1204 nut system.
Update the firmware settings with the provided gcode
We uploadeed some Special gcode that will set for you the ZStep/mm for each scenario depending on the Nut you are using.
ConfigM8.gcode, will set ZStep/mm to 2560.00
ConfigSFU1204.gcode will set ZStep/mm to 800.00
ConfigTR08x1.5.gcode will set Zstep/mm to 2133.33
Requirements
If you are using the Gcode, you might need to save the settings manually into your electronic display. We already included the Save to EEProm gcode commands but for some reasons sometimes the values are not saved properly.
Have a great printing experience.
3D Modular Systems
Evolutive 3D Printers
You enjoy it and want to help us with a donation: https://www.paypal.me/3DMS
http://www.3dmodularsystems.com
Twitter: https://twitter.com/3dmodularsystem
Youtube: http://www.youtube.com/c/3DModularSystems3DPrinters
This thing allows to convert 1 nut system into another .
For example,
You can convert a system using SFU1204 leadscrew into a system using either M8 threaded rod or Tr08x1.5 trapezoidal screw.
What you need:
For each scenario you will need either a M8 nut or a Tr08x1.5 Hex nut.
Those nuts will be inserted into the adapter making it compatible with the current SFU1204 nut system.
Update the firmware settings with the provided gcode
We uploadeed some Special gcode that will set for you the ZStep/mm for each scenario depending on the Nut you are using.
ConfigM8.gcode, will set ZStep/mm to 2560.00
ConfigSFU1204.gcode will set ZStep/mm to 800.00
ConfigTR08x1.5.gcode will set Zstep/mm to 2133.33
Requirements
If you are using the Gcode, you might need to save the settings manually into your electronic display. We already included the Save to EEProm gcode commands but for some reasons sometimes the values are not saved properly.
Have a great printing experience.
3D Modular Systems
Evolutive 3D Printers
You enjoy it and want to help us with a donation: https://www.paypal.me/3DMS
http://www.3dmodularsystems.com
Twitter: https://twitter.com/3dmodularsystem
Youtube: http://www.youtube.com/c/3DModularSystems3DPrinters