Satsana Ender 3V2 with Direct Drive Conversion by bgyen

Last crawled date: 3 years, 5 months ago

Another remix of the Satsana V52 with a direct drive bracket I designed. This one that I designed shortened the bowden tube length by 8mm. My previous setup was https://www.thingiverse.com/thing:4662728
The Satsana fan duct is remixed to be used with a 5015 blower fan and a 4020 fan. I sunk in the hot end cooling fan so it it doesn't stick out so much as the original Satsana was for a 4010 fan. You could use a 4010, it will just look more sunk into the fan duct. Some other minor changes to integrate the fan duct with the direct drive setup.
The direct drive bracket relocates the stock extruder assembly and motor over the fan duct. I tried to make a short as possible connection from the extruder to the nozzle. The Bowden tube is shortened to 63mm. You will need to extend the wiring to the extruder motor.
Parts: 4020 fan (screws for fan), 5015 blower fan (screw for fan), 1xM3 8mm screw to attach fan duct to the direct drive bracket