Sapphire Dragonfly BMO Mounting Adapter by jayxcfgj

Last crawled date: 2 years, 10 months ago

I designed a mounting adapter plate for the Dragonfly BMO Hotend from Phaetus so you can mount it on the TwoTrees Sapphire 3d printers.
My goal was to reuse the stock metal cage, because in my opnion metal is even better then plastic for stability etc.
For this we don´t need the adapter which comes with the dragonfly for the groove-mount. Instead we need an PC4-M8 Push-fit and 4 DIN934 M3 Nuts.
Also you need to motify the metal cage:
The big hole on the top of metal cage needs to extend to be a kind of a groove, so the Push-fit have easily some space.
Because after the modification with the dragonfly the nozzle-tip is a bit lower then before you may need to replace the fanducts (maybe I uploaded my custom designed fanducts soon) and cut the two "fishplates" an both sides, too.
I recommand an material which are temperatur-resistend like ASA, because the heatsink will get warm.