Thingiverse
Sandmann's simple Jeep
by Thingiverse
Last crawled date: 4 years, 3 months ago
Update:
New parts:
-dashboard with short rod for the steering wheel axle
-smaller steering wheeel since the Sandmann is a little guy
-front seats row, direct mounting to the floor, adjust the holes when finding the fit with the new dashboard and wheel
Have removed the tiny holes surrounding the speedometer hole.
The walls did not come out, vanished.
If your f*** chineese made slicer does not well take the version with the single speedometer hole.
-steering wheel with rod mounted on a tiny cockpit plate thing (with holes for speedometer and lights or tumblers)
-tailgate V2 with holders for wheel and gasoline can
-separate holders for the wheel and the gasoline can
Have printed and assembled the windshield frame.
Make the joint using 2mm toothpicks. I works great.
Since the lovely Sandmann is allways helping poeple he could need an other snow plower or a small wreck car , fire patrol car.
The thing:
Sandmann operates allready a number of "Land Rover Series I" cars in his huge collection of mobiles of all kind (cars, boots, airplanes,....) but no Jeep.
This is about to change the misery.
See my other things to get familar with the lovely allways friendly Sandmann .
He brings the childrens the kiss good night story since 60 years, on TV each day.
.
Inspiration taken from a simple modell from
Zenziwerken, sliced Jeep for the CNC, lasercutter, scrollsaw.
Wooden Toy Jeep made by LittleWoodandToyShop on Etsy.
.
I have made the paylod section ready for converting the car into a fire pump car, small crane, pick-up, whats not. emergency rescuer, snow plower, much more in the game.
I like it, making a basic design and modify it many times for any purpose I want.
Jeep production licensed by Mitsubishi crudely named "Willyx" 1955https://upload.wikimedia.org/wikipedia/commons/c/c1/Mitsubishi_1955_Jeep.JPG
Ready for printing NOW!
All parts screwed together, no glue please.
Some small fixes required -FIXED see the new parts V3-3
On the sidewall change the rear axle cutout to rectangular if the axle does not fit the cutout.
The hole for the mount screw of the grill needs to be shifted a little bit upward.
If you have printed out the frame, make it a fit by sanding down the engine compartment a bit.
Sorry for inconvenience.
Will adjust the frame part. FIXED
Needed parts
Of course the Sandmann figurine.
But other crowds have occupied the Sandmanns spaceships and moon explorer allready.
Some EMTEC silicone/rubber made figurines hiding a USB stick could be used by making an special adapter that holds the body with no stock base piece tightly.
See my other Sandmann things.
Please do not use no machine screws this time.
Small screws for plastic of vatious length required, take those of 2.5mm diameter.
Prefered lens head screws. For the joints choose the the heads no more than 5mm head diameter.
A little wider screw heads (ca 7-9mm) for fastening the axles with the frame and the wheel caps.
See the pictures.
Please allways predrill the screw holes at least when printing from brittle PLA or similar
A few LED 5mm, 3mm could make the front and tail light, direction indicators.
Some shiny metal washers or knobs from the sewing accessories so for making the caps on the wheels.
.
Parts:
The dimensions are set to fit the Sandmann figure I have used on the spaceship projects and the Lunochod moon rover.
For easier designing I have given the most parts size values with no fractions of a millimeter.
Cars new parts V3-3 (plus a few old parts seats, wheels).
-wind shield No.39 (single window, with matching engine cover No.38)
-the base frame no bumper No.33
-the base frame with bumper No.34
-the sidewalls No.32
-the front bumper
-the engine grill (with holes diameter 5mm, 3mm for LED or inserts)
-the engine compartment with cover No38
-backside door
-the wheels
-the seats parts various kind
-the payload platform, this time prepared for two rows of seats
-unified axles replaced by indidvually sized.
-gasoline can
-holder for the gasoline can
-holder for the spare wheel
-tailgate V2 with holder for gasoline can and spare wheel
-accessories collection to be mounted onto the plain back door
TODO
-steering wheel
-warning light, endlessly circulating blue/red light on top of the engine cover
-minor adjustments, probably the head light could be made from 10mm LED
-more exchangeable platforms / application
-cockpit plate with indicators, speedometer? Probably not.
Some interesting sources
Zenziwerken Simplified Jeep (CNC/cutter/scrollsaw)https://www.thingiverse.com/thing:2443556
-Wooden Toy Jeep made by LittleWoodandToyShop on Etsyhttps://i.etsystatic.com/12241396/r/il/0776e5/1481291977/il_794xN.1481291977_difc.jpg
Ossum Jeep on Instructable 1:10https://www.instructables.com/id/3D-Printed-MB-Jeep-and-M416-Trailer-in-110-Scale/https://cdn.instructables.com/FRJ/K2CE/IY4QOVH6/FRJK2CEIY4QOVH6.LARGE.jpghttps://cdn.instructables.com/FEX/E79Y/IYAMZGYA/FEXE79YIYAMZGYA.LARGE.jpg
Ossum Jeep on Thingiversehttps://www.thingiverse.com/thing:2056923/
Ossum Jeep collectionhttps://www.thingiverse.com/thing:2293988
Jeep RMTCTRL 1:24 on Thingiversehttps://www.thingiverse.com/thing:3012437https://thingiverse-production-new.s3.amazonaws.com/assets/ac/de/ed/dd/e3/00100dPORTRAIT_00100_BURST20180716201148240_COVER.jpg
Willys Jeep parts, accessorieshttps://www.thingiverse.com/thing:2461559
-Gasoline can 1:10https://www.thingiverse.com/thing:1822331
1948 Popular Mechanics Jeep
Anthony Mentells
See the files section, have uploaded the pictures for convenient reading.
Headlights made from 10mm LED'shttps://www.thingiverse.com/thing:2669606
Search for Tonka toys, many Jeeps, metal pressed toy cars.
New parts:
-dashboard with short rod for the steering wheel axle
-smaller steering wheeel since the Sandmann is a little guy
-front seats row, direct mounting to the floor, adjust the holes when finding the fit with the new dashboard and wheel
Have removed the tiny holes surrounding the speedometer hole.
The walls did not come out, vanished.
If your f*** chineese made slicer does not well take the version with the single speedometer hole.
-steering wheel with rod mounted on a tiny cockpit plate thing (with holes for speedometer and lights or tumblers)
-tailgate V2 with holders for wheel and gasoline can
-separate holders for the wheel and the gasoline can
Have printed and assembled the windshield frame.
Make the joint using 2mm toothpicks. I works great.
Since the lovely Sandmann is allways helping poeple he could need an other snow plower or a small wreck car , fire patrol car.
The thing:
Sandmann operates allready a number of "Land Rover Series I" cars in his huge collection of mobiles of all kind (cars, boots, airplanes,....) but no Jeep.
This is about to change the misery.
See my other things to get familar with the lovely allways friendly Sandmann .
He brings the childrens the kiss good night story since 60 years, on TV each day.
.
Inspiration taken from a simple modell from
Zenziwerken, sliced Jeep for the CNC, lasercutter, scrollsaw.
Wooden Toy Jeep made by LittleWoodandToyShop on Etsy.
.
I have made the paylod section ready for converting the car into a fire pump car, small crane, pick-up, whats not. emergency rescuer, snow plower, much more in the game.
I like it, making a basic design and modify it many times for any purpose I want.
Jeep production licensed by Mitsubishi crudely named "Willyx" 1955https://upload.wikimedia.org/wikipedia/commons/c/c1/Mitsubishi_1955_Jeep.JPG
Ready for printing NOW!
All parts screwed together, no glue please.
Some small fixes required -FIXED see the new parts V3-3
On the sidewall change the rear axle cutout to rectangular if the axle does not fit the cutout.
The hole for the mount screw of the grill needs to be shifted a little bit upward.
If you have printed out the frame, make it a fit by sanding down the engine compartment a bit.
Sorry for inconvenience.
Will adjust the frame part. FIXED
Needed parts
Of course the Sandmann figurine.
But other crowds have occupied the Sandmanns spaceships and moon explorer allready.
Some EMTEC silicone/rubber made figurines hiding a USB stick could be used by making an special adapter that holds the body with no stock base piece tightly.
See my other Sandmann things.
Please do not use no machine screws this time.
Small screws for plastic of vatious length required, take those of 2.5mm diameter.
Prefered lens head screws. For the joints choose the the heads no more than 5mm head diameter.
A little wider screw heads (ca 7-9mm) for fastening the axles with the frame and the wheel caps.
See the pictures.
Please allways predrill the screw holes at least when printing from brittle PLA or similar
A few LED 5mm, 3mm could make the front and tail light, direction indicators.
Some shiny metal washers or knobs from the sewing accessories so for making the caps on the wheels.
.
Parts:
The dimensions are set to fit the Sandmann figure I have used on the spaceship projects and the Lunochod moon rover.
For easier designing I have given the most parts size values with no fractions of a millimeter.
Cars new parts V3-3 (plus a few old parts seats, wheels).
-wind shield No.39 (single window, with matching engine cover No.38)
-the base frame no bumper No.33
-the base frame with bumper No.34
-the sidewalls No.32
-the front bumper
-the engine grill (with holes diameter 5mm, 3mm for LED or inserts)
-the engine compartment with cover No38
-backside door
-the wheels
-the seats parts various kind
-the payload platform, this time prepared for two rows of seats
-unified axles replaced by indidvually sized.
-gasoline can
-holder for the gasoline can
-holder for the spare wheel
-tailgate V2 with holder for gasoline can and spare wheel
-accessories collection to be mounted onto the plain back door
TODO
-steering wheel
-warning light, endlessly circulating blue/red light on top of the engine cover
-minor adjustments, probably the head light could be made from 10mm LED
-more exchangeable platforms / application
-cockpit plate with indicators, speedometer? Probably not.
Some interesting sources
Zenziwerken Simplified Jeep (CNC/cutter/scrollsaw)https://www.thingiverse.com/thing:2443556
-Wooden Toy Jeep made by LittleWoodandToyShop on Etsyhttps://i.etsystatic.com/12241396/r/il/0776e5/1481291977/il_794xN.1481291977_difc.jpg
Ossum Jeep on Instructable 1:10https://www.instructables.com/id/3D-Printed-MB-Jeep-and-M416-Trailer-in-110-Scale/https://cdn.instructables.com/FRJ/K2CE/IY4QOVH6/FRJK2CEIY4QOVH6.LARGE.jpghttps://cdn.instructables.com/FEX/E79Y/IYAMZGYA/FEXE79YIYAMZGYA.LARGE.jpg
Ossum Jeep on Thingiversehttps://www.thingiverse.com/thing:2056923/
Ossum Jeep collectionhttps://www.thingiverse.com/thing:2293988
Jeep RMTCTRL 1:24 on Thingiversehttps://www.thingiverse.com/thing:3012437https://thingiverse-production-new.s3.amazonaws.com/assets/ac/de/ed/dd/e3/00100dPORTRAIT_00100_BURST20180716201148240_COVER.jpg
Willys Jeep parts, accessorieshttps://www.thingiverse.com/thing:2461559
-Gasoline can 1:10https://www.thingiverse.com/thing:1822331
1948 Popular Mechanics Jeep
Anthony Mentells
See the files section, have uploaded the pictures for convenient reading.
Headlights made from 10mm LED'shttps://www.thingiverse.com/thing:2669606
Search for Tonka toys, many Jeeps, metal pressed toy cars.
Similar models
thingiverse
free
1/10 scale MB Jeep Wheels For Ossum Jeep by bret4
...//www.thingiverse.com/thing:2056923
here is a link to the 1/10 scale jeep tires i made.
https://www.thingiverse.com/thing:2416783
thingiverse
free
axle clamp for Ossum Jeep with mrcrankyface axles by jjpython
... clamp for ossum jeep with mrcrankyface axles by jjpython
thingiverse
this is to hold the mrcrankyface axles onto the ossum jeep
3dwarehouse
free
bmw steering wheel (made for axle)
...e bmw steering wheel made for axle becose he have rate all my models! :) #axle #bmw #car #cool #fun #steer #steering #turn #wheel
thingiverse
free
Sandmann universal tool carrier vehicle
... recovered the episode showing the backside of the snow plower car.
the engine hood can be added later on behind the rear window.
thingiverse
free
Spider 9 inspired TLT axle housing by beast_c_a_t
...g, one without any suspension mounts, and one with leaf spring mounts for ossums jeep (https://www.thingiverse.com/thing:2056923)
thingiverse
free
Ossum Jeep leaf springs and the axle holders by Guenter
...ed as a part. the brace i put on the width of the leaf spring, in order to increase the stability. i hope you can use it as well.
thingiverse
free
Hitch loop for WWII military Jeep trailer (Ossum Jeep) by bidulm
...crew to make a thread at the tip of the part.
the spring does its work, and the ring rotates on its axis, as on the real trailer.
thingiverse
free
Derby Car Wheels by Gogo327
...de to make all the wheels uniform. also made the axle holes bigger for a larger axle. designed by daniel s. modeled by stephen w.
thingiverse
free
Chassis : Front Plate by shawwwn
...v 1:http://www.thingiverse.com/thing:1376086
rev. 1:
adjust mounting hole positions to fit axle holder, rev 1.
freecad 0.15(4671)
grabcad
free
Toy Truck
...gh the holes in the chassis and tap them into the frame.
the truck is ready! should not take longer than 10 minutes to assemble.
Sandmann
thingiverse
free
Shower Head Holder by sandmann
...shower head holder by sandmann
thingiverse
holder for shower head
thingiverse
free
Pipe clamp 25mm by sandmann
...pipe clamp 25mm by sandmann
thingiverse
pipe clamp for pipe 25mm
thingiverse
free
Pipe clamp 16mm by sandmann
...pipe clamp 16mm by sandmann
thingiverse
pipe clamp for pipe 16mm
thingiverse
free
Pipe clamp 20mm by sandmann
...pipe clamp 20mm by sandmann
thingiverse
pipe clamp for pipe 20mm
thingiverse
free
Door handle, angled by sandmann
...door handle, angled by sandmann
thingiverse
door handle, angled spacing of the holes 50 mm, ball diameter ~ 50mm
thingiverse
free
Stand for boxes, cabinets, shelves by sandmann
...stand for boxes, cabinets, shelves by sandmann
thingiverse
stand, 60x60mm, height about 30 mm
thingiverse
free
Water Filter Cartridge Holder by sandmann
...water filter cartridge holder by sandmann
thingiverse
for water filter cartridge diameter 50mm! wall mounting with 2 holes
thingiverse
free
Bath Shower Handle by sandmann
...handle for bath and shower. you need a tube inner diameter of 29.8 to 30 mm and the outside diameter 33mm-34mm, optimally 33,6mm.
thingiverse
free
DJI GPS Mount by sandmann
... copter, light weight, distance of holes 54mm.
gluing the module with double-sided tape
please mount with groove to the front ;-)
thingiverse
free
DJI Naza LED Halter - DJI LED Holder by sandmann
...dji naza led halter - dji led holder by sandmann
thingiverse
naza led holder
Jeep
3d_export
$5
jeep
...jeep
3dexport
jeep toy
3d_export
$5
jeep
...jeep
3dexport
this is a 3d jeep created in solidworks.
archibase_planet
free
Jeep
...jeep
archibase planet
jeep motor-car car
jeep-wrangler - 3d model for interior 3d visualization.
3d_export
$14
jeep
...jeep
3dexport
turbosquid
$100
Jeep
...ep
turbosquid
royalty free 3d model jeep for download as max on turbosquid: 3d models for games, architecture, videos. (1364849)
turbosquid
$40
jeep
...eep
turbosquid
royalty free 3d model jeep for download as ma on turbosquid: 3d models for games, architecture, videos. (1183919)
turbosquid
$29
Jeep
...eep
turbosquid
royalty free 3d model jeep for download as ma on turbosquid: 3d models for games, architecture, videos. (1377059)
turbosquid
$5
Jeep
...eep
turbosquid
royalty free 3d model jeep for download as ma on turbosquid: 3d models for games, architecture, videos. (1153064)
turbosquid
$5
Jeep
...ep
turbosquid
royalty free 3d model jeep for download as c4d on turbosquid: 3d models for games, architecture, videos. (1391581)
turbosquid
$1
JEEP
...
turbosquid
royalty free 3d model jeep for download as blend on turbosquid: 3d models for games, architecture, videos. (1608181)
Simple
turbosquid
$1
Simple goblet (Taca simples)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
simple bench
...simple bench
3dexport
the simple bench which can be used in simple projects or video-games.
3d_export
$5
simple knob
...simple knob
3dexport
simple knob
3d_export
$5
simple handle
...simple handle
3dexport
simple handle
3d_export
$5
simple button
...simple button
3dexport
simple button
3d_export
$5
simple spindle
...simple spindle
3dexport
simple spindle
3d_export
$5
simple wheel
...simple wheel
3dexport
simple wheel
3d_export
$5
simple chair
...simple chair
3dexport
simple blue chair
3d_export
free
Simple room
...simple room
3dexport
here is a simple but beautiful room
3ddd
free
SIMPLE | Кресло
...io cianfarra , simple
производитель area declic дизайн giulio cianfarra коллекция simple