Thingiverse

Sanding Block (with comfortable handle and firm grip of sandpaper) by freezyfresh
by Thingiverse
Last crawled date: 4 years, 6 months ago
Sanding Block in regular Hand-Tool-Size
Sanding block to fit 93mm wide sanding paper from the standardized sanding paper rolls. It has a really comfortable handle for medium/big-sized hands and a really tight grip on the sanding paper due to normal screws for clamping.
Parts to print (orientation as in the STL-file works fine):
1x base (depending on the variant you choose)
1x clamping jaw front
1x clamping jaw back
4x screw handle
There are two variants:
With threaded inserts (-> base_threaded_insert.stl)
Extra parts needed:
4x M5 threaded insert (I used Ruthex threaded insert, so the hole is 6,4mm)
4x M5x25mm hexagon head screw (DIN 933)
With Nuts (-> base_nut_pocket.stl)
Extra parts needed:
4x M5 Nut (DIN 934)
4x M5x25mm hexagon head screw (DIN 933)
Sanding block to fit 93mm wide sanding paper from the standardized sanding paper rolls. It has a really comfortable handle for medium/big-sized hands and a really tight grip on the sanding paper due to normal screws for clamping.
Parts to print (orientation as in the STL-file works fine):
1x base (depending on the variant you choose)
1x clamping jaw front
1x clamping jaw back
4x screw handle
There are two variants:
With threaded inserts (-> base_threaded_insert.stl)
Extra parts needed:
4x M5 threaded insert (I used Ruthex threaded insert, so the hole is 6,4mm)
4x M5x25mm hexagon head screw (DIN 933)
With Nuts (-> base_nut_pocket.stl)
Extra parts needed:
4x M5 Nut (DIN 934)
4x M5x25mm hexagon head screw (DIN 933)